Cat® C0.7 Diesel Engine

Cat^® C0.7 Diesel Engine

The Cat^® C0.7 Industrial Diesel Engine is offered at 9 bkW (12 bhp) @ 2200 rpm and meets U.S. EPA Tier 4 Final emission standards. Ratings: 12.2-15.3 bkW (16.4-20.5 bhp) @ 2800-3600 rpm are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C0.7 engines include: Compactors/Rollers, General Industrial, Mobile Earthmoving Equipment, Mobile Light Towers and Turf and Landscaping.

Maximum Power

17.8HP

Maximum Torque

32lb-ft @ 2400 rpm

Rated Speed

2200-3600 rpm

Minimum Power

11.8HP

Emissions

U.S. EPA Tier 4 Final, EU Stage V

Engine Configuration

In-Line 3

Bore

2.6in

Stroke

2.8in

Displacement

46.5in³

Compression Ratio

23.5:1

Aspiration

Naturally Aspirated (NA)

Combustion System

Indirect Injection

Rotation from Flywheel End

Counterclockwise

Length

18.9in

Width

14.6in

Height

20.8in

Weight – Net Dry – Basic Operating Engine Without Optional Attachments

156.6lb

Air Inlet
- Inlet manifold with choice of inlets.
Control System
- Alternator 12 volt 14 amp
- Starter motor 12 volt
- Glow plug starting aid
Cooling System
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
Flywheel And Flywheel Housing
- SAE No. 6 1/2 flywheel
- Choice of SAE No. 5 or standard backplate flywheel housing
Fuel System
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
Lube System
- Closed circuit breather
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
General
- Cast iron, engine block
- Cast iron exhaust manifold–side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request

Cat® C0.7 Diesel Engine

SHARE:

Coming Soon

Cat^® C0.7 Diesel Engine