CM25E Generator Set

Photos

Genset Rating Range
1940 - 2910 kWe
Fuel Type
Diesel oil / heavy fuel oil (HFO) / crude oil
Emission Level Up To
World bank emission certification (Stage 2)
Voltage
3000 to 13800 Volts

Specs

Generator Set Specifications

Genset Rating Range
1940 - 2910 kWe
Emission Level Up To
World bank emission certification (Stage 2)
Voltage
3000 to 13800 Volts
Aspiration
Turbocharged-aftercooled
Bore
10.04in
Emergency Ramp Up 10% To 100% Load
30 s
Genset Efficiency Up To
43.50%
Engine Type
4-stroke-engine
Frequency At Speed
50 Hz @ 750 / 60 Hz @ 720
Normal Ramp Up To 100% Load
85 s
Ready To Accept Loads (Preheated/Vented)
40 s
Stroke
15.75in
Minimum Rating
1940 kWe
Maximum Rating
2910 kWe
Emissions/Fuel Strategy
World bank (WB) emission certification stage 1 and 2, Post-emission treatment systems for lower emission requirements available
Duty Cycle
Prime, Continuous

Engine Specifications

Fuel Type
Diesel oil / heavy fuel oil (HFO) / crude oil
Configuration
6,8,9 cylinder
Engine Rating Range
2010 - 3015 kW
Mean Effective Pressure Up To
396psi
Specific Fuel Oil Consumption (WB I) Up To
0.412
Specific Fuel Oil Consumption (WB II) Up To
0.412
Specific Lube Oil Consumption
0.001
Swept Volume
1247in³
Engine Model
CM25, 4-stroke-engine
Bore
10.04in
Stroke
15.75in
Aspiration
Turbocharged-aftercooled

Generator Set Dimensions

Dry Weight - Genset (maximum)
123459lb
Dry Weight - Genset (minimum)
94799lb
Height - Maximum
160in
Height - Minimum
152in
Length - Maximum
343in
Length - Minimum
304in
Width - Maximum
93in
Width - Minimum
93in

Features

Reliable Operation

  • Intensive cooling of key components including exhaust valve seats, injector cooling integrated into lube oil system
  • Reliable, proven and high efficient single turbo charging system
  • Classification society standards ensure high safety and quality
  • Intelligent simplicity ensures a robust engine platform
  • Optimized service schedules enable high availability and long durability
  • Intensive cooling of key components including exhaust valve seats, injector cooling integrated into lube oil system
  • Reliable, proven and high efficient single turbo charging system
  • Classification society standards ensure high safety and quality
  • Intelligent simplicity ensures a robust engine platform
  • Optimized service schedules enable high availability and long durability
  • Control & Monitoring

  • Ultrafast start time and load acceptance
  • No engine start limitations
  • Continuous power (base and peak load), prime power, stand-by
  • Part load with high efficiency
  • Monitoring for unattended operation
  • Asset intelligence system
  • Ultrafast start time and load acceptance
  • No engine start limitations
  • Continuous power (base and peak load), prime power, stand-by
  • Part load with high efficiency
  • Monitoring for unattended operation
  • Asset intelligence system
  • Ease Of Installation

  • Reduced complexity of standard modular design allows an easy installation
  • Low space requirements between the gensets
  • Genset is ready for installation
  • Generator set designed for direct elastic mounting
  • Reduced complexity of standard modular design allows an easy installation
  • Low space requirements between the gensets
  • Genset is ready for installation
  • Generator set designed for direct elastic mounting
  • Ease Of Operation

  • Low fuel and oil consumption
  • Low maintenance requirements
  • Operator and maintenance training courses available
  • Low fuel and oil consumption
  • Low maintenance requirements
  • Operator and maintenance training courses available
  • Intelligent Simplicity

  • High reliability, modular design and integral construction reduce the number of components by 40% over conventional designs e.g.:
    - Dry engine block with integrated ducts for lubricating oil and charge air and underslung crankshaft
    - Compact cylinder head design
  • Smart maintenance solutions:
    - Easily removable cylinder heads, quick removable fluid connections
    - Split connecting rods to allow fast and easy piston removal without disturbing the big end bearing
    - Segmental camshaft design
    - Simplified parts spectrum by using single-pipe exhaust gas
    - Engine block free from cooling water
  • State-of-art material ensures long life time
  • High reliability, modular design and integral construction reduce the number of components by 40% over conventional designs e.g.:
    - Dry engine block with integrated ducts for lubricating oil and charge air and underslung crankshaft
    - Compact cylinder head design
  • Smart maintenance solutions:
    - Easily removable cylinder heads, quick removable fluid connections
    - Split connecting rods to allow fast and easy piston removal without disturbing the big end bearing
    - Segmental camshaft design
    - Simplified parts spectrum by using single-pipe exhaust gas
    - Engine block free from cooling water
  • State-of-art material ensures long life time
  • Ease Of Maintenance

  • Smart maintenance solutions allow an easy component accessibility
  • Large inspection openings afford an easy serviceability to core engine internals
  • Core engine components designed for reconditioning and reuse
  • Short maintenance times enable high availability
  • No engine removal necessary for maintenance and overhauls
  • Smart maintenance solutions allow an easy component accessibility
  • Large inspection openings afford an easy serviceability to core engine internals
  • Core engine components designed for reconditioning and reuse
  • Short maintenance times enable high availability
  • No engine removal necessary for maintenance and overhauls
  • Fuel

  • Liquid: Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
  • Dual:
    - Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
    - Natural gas with methane number > 80 and lower heating value of 28MJ/Nm3
  • Gaseous: Natural gas with methane number > 80 and lower heating value of 31.5 MJ/Nm3
  • Liquid: Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
  • Dual:
    - Light fuel oil (LFO), crude oil and heavy fuel oil (HFO) with fuel quality up to 700 cSt/50°C according to CIMAC H55/K55
    - Natural gas with methane number > 80 and lower heating value of 28MJ/Nm3
  • Gaseous: Natural gas with methane number > 80 and lower heating value of 31.5 MJ/Nm3
  • Emissions

  • World bank emission certification (Stage 2)
  • Technische Anleitung (TA) Luft (only gas)
  • Post-emission treatment systems for lower emission requirements available
  • World bank emission certification (Stage 2)
  • Technische Anleitung (TA) Luft (only gas)
  • Post-emission treatment systems for lower emission requirements available
  • Expertise & Experience

  • Assistance for planning - delivery - commissioning - operation and service)
  • Expertise and experience for solutions to maximize benefits, e.g. combine heat and power systems (CHP)
  • Assistance for planning - delivery - commissioning - operation and service)
  • Expertise and experience for solutions to maximize benefits, e.g. combine heat and power systems (CHP)
  • Standard Equipment

    • Fuel System
      • Circulation module
      • Pre-pressure module
      • Separator module
      • Engine ventilation module (only dual fuel (DF) and gas)
      • Gas valve unit (GVU) (only dual fuel (DF) and gas)
      • Ignition fuel oil module (only dual fuel (DF))
    • Lubricating Oil System
      • Combined module: cooling water system and lube oil system
      • Lube oil separator module
      • Piping interface module
    • Cooling Water System
      • Combined module: see lube oil system
      • Cooling water system with radiators
      • Piping interface module
    • Starting System
      • Starting air compressor module
      • Starting air receiver module
    • Combustion Air System
      • Air filter - pocket
      • Air filter - oil bath
      • Air filter - pulse
    • Exhaust System
      • Exhaust gas silencer
      • Selective catalytic reduction (SCR) system
      • Oxidation catalytic (Oxicat) converter system
      • Exhaust gas ventilation module (only dual fuel (DF) and gas)
    • Control & Monitoring System
      • Local control panel (LCP)
      • Local data panel (LDP) / generator control panel (GCP)
      • Motor control center module (MCC)
      • Engine monitoring package
      • Gas leak detection per cylinder (only dual fuel (DF) and gas)
    • Mounting System
      • Elastic mounting - genset/engine

    Optional Equipment