Photos
Exterior View
G3520E Gas Generator
|
|
|
|
|
Specs
Gas Generator Sets Specification
- Maximum Electrical Efficiency
- 42.4%
- Maximum Standby Rating
- 2039
Engine Specification
- Engine Model
- G3520E
Generator Set Specifications
- Maximum Continuous Rating
- 2022 ekW
- Fuel Type
- Natural Gas
- Frequency
- 50
- RPM
- 1500
- Maximum Electrical Efficiency
- 41.50%
- Maximum Standby Rating
- 2022
Engine Specifications
- Bore
- 6.7in
- Stroke
- 7.5in
- Displacement
- 5248in³
- Aspiration
- TA
- Engine Model
- G3520E
- Compression Ratio
- 11.9
- Fuel System
- Natural Gas
Generator Set Dimensions
- Length
- 271in
- Width
- 79in
- Height
- 107in
- Dry Weight - Genset
- 39306lb
Features
CAT G3520E Gas Engine
- Robust high speed block design provides prolonged life and lower owning operationg costs
- Designed for maximum performance on low pressure pipeline natural gas
- Simple open chamber combustion system for reliability and fuel flexibility
- Leading edge technology in ignition system and air/fuel ratio control for lower emission and engine efficiency
- One electronic control module handles all engine functions: ignition, governing, air/fuel ratio control and engine protection
- Robust high speed block design provides prolonged life and lower owning operationg costs
- Designed for maximum performance on low pressure pipeline natural gas
- Simple open chamber combustion system for reliability and fuel flexibility
- Leading edge technology in ignition system and air/fuel ratio control for lower emission and engine efficiency
- One electronic control module handles all engine functions: ignition, governing, air/fuel ratio control and engine protection
SR5 Generator
- Designed to match performance and output characteristics of Caterpillar gas engines
- Industry leading mechanical and electrical design
- High efficiency
- Designed to match performance and output characteristics of Caterpillar gas engines
- Industry leading mechanical and electrical design
- High efficiency
EMCP 4.3 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
CAT Electronic Control System
- Simple user friendly interface and navigation
- Digital monitoring, metering and protection setting
- Fully-featured power metering and protective relaying
- Remote control and monitor capability options
- Simple user friendly interface and navigation
- Digital monitoring, metering and protection setting
- Fully-featured power metering and protective relaying
- Remote control and monitor capability options
Cooling System
Emissions
- Meets most worldwide emissions requirements down to 0.5 g/bhp-hr NOx level without aftertreatment
- Meets most worldwide emissions requirements down to 0.5 g/bhp-hr NOx level without aftertreatment
Proven System
- Field proven in a wide range of applications worldwide
- fully prototype tested
- Certified torsional vibration analysis available
- Field proven in a wide range of applications worldwide
- fully prototype tested
- Certified torsional vibration analysis available
Full Range of Attachments
- Wide range of bolt-on system expansion attachments
- Factory designed and tested
- Flexible packaging options for easy and cost effective installation
- Wide range of bolt-on system expansion attachments
- Factory designed and tested
- Flexible packaging options for easy and cost effective installation
World Wide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Standard Equipment
-
- Control Panel
-
- EMCP 4.3
-
- Air Inlet
-
- Two-element single-stage air cleaner with enclosure and service indicator
-
- Cooling
-
- Standard CAT Flange
- Right-Hand/Left-Hand Outlet Connections
- Engine driven water pumps for jacket water and aftercooler
- ANSI/DN adapter flange connections
-
- Exhaust
-
- Individual exhaust port and turbocharger outlet wired to Integrated Sensing Module (ISM) with Gas ECM providing alarms and shutdowns
- Dry exhaust manifolds, insulated and shielded
-
- Fuel System
-
- Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
- Fuel filter
- Engine installed, fuel metering valve
- 24V ETR Gas Shutoff Valve
- Throttle plate, 24V DC actuator, controlled by GECM
-
- Ignition System
-
- Individual Cylinder Detonation Sensitive Timing (DST)
- Electronic Ignition System (controlled by GECM)
-
- Generator
-
- SR4B
- Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
- Busbar connections
- SR5
- Winding temperature detectors
- Permanent Magnet Excitiation
- Anti-condensation space heater
- 3-phase brushless, salient pole
-
- General
-
- RH Service
- Crankshaft vibration damper and guard
- Paint - Caterpillar Yellow except rails and radiators gloss black
Optional Equipment
-
- Air Inlet
-
- Heavy duty air cleaner
- Regular duty air cleaner
- Air cleaner with precleaner
- Mounting stand
-
- Contol Panel
-
- Local NFPA99-110 Alarm Module w/LEDs
- PL1000E/PL1000T Communications Module
- Remote 24V-32V 8/16 Light Annunciator
- Custom 8-Light Alarm Module
- Engine Failure Relay
- Synchronizing Module
-
- Control Panels
-
- Local alarm module
-
- Cooling
-
- Jacket water coolant heater
- Cat Flange, ANS/DIN Adapter Flange
- Engine Pumps
- Aftercooler air lines, aftercooler core replacement
- Inlet/Outlet connections
-
- Exhaust
-
- 15/18/25 dBA Muffler Attenuation
- 305/356mm Flange/Exhaust Expanders, 305/406mm Flange and Exhaust Expander
- 356-406mm Flange and Exhaust Expander
- Mufflers (15/18/25 dBA Attenuation) and spark-arresting muffler with ANSI companion flanges
- 305/360/406 mm Elbow Kits
- Flexible Fittings
- 16" Spark Arresting Muffler
-
- Fuel System
-
- Gas Train (31.5 MJ/Nm3 with inlet pressure 19.2 to 48.3 kPa (2.78 to 7 psi))
- Gas Train 0-100 kPag, 4-20mA pressure sensors
- Fuel Filter, Gas Filter
- 24VDC Gas Shutoff Valve, Gas Knockdown Regulator
-
- Generator
-
- Annunciator modules
- Air filters, cable access box
- Bearing temperature detectors
- Low voltage extension box
- 16 Point/32 light annunciator with NFPA99-110/CSA282 configuration
- Extension box, European bus bars
- Generator air filter
- Medium and high voltage generators and attachment
- 415/400/380, 3300/6600/11000 Volt Generator Options (50 Hz)
- 480/4160/13200 Volt Generator Options (60 Hz)
- 8/15/23M harness
- 8.7/15 kV Cross, Differential, Current Transformers (CCCT, DCT, CT)
- Cable access box
-
- Governing System
-
- Load share module
-
- Starting/charging
-
- Battery diconnect switch
- 45A, 24V charging alternator (requires engine driven pumps)
- 24V Starting Motors
- 20A Battery Charger
- Battery with cables and rack (shipped loose)
