VM 46 DF Marine Generator Set

Photos

The key attributes of the VM 46 DF are class leading efficiency and loading capacity as well as operational simplicity, which is supported by a fully automated engine control. Fast service access as well as service and maintenance simplicity are supported by a modular engine design concept and the monitoring and diagnostic system.

Minimum Rating
10357 kWe (12960 kVA)
Maximum Rating
14807 kWe (18528 kVA)
Emissions/Fuel Strategy
IMO II in diesel mode / IMO III in gas mode
Configuration
12,16 Cylinder

Specs

Generator Set Specifications

Minimum Rating
10357 kWe (12960 kVA)
Maximum Rating
14807 kWe (18528 kVA)
Minimum Rating
10357 kWe (12960 kVA)
Maximum Rating
14807 kWe (18528 kVA)
Emissions/Fuel Strategy
IMO II in diesel mode / IMO III in gas mode

Generator Set Configurations

Emissions/Fuel Strategy
IMO II in diesel mode / IMO III in gas mode

Engine Specifications

Configuration
12,16 Cylinder
Bore
18.1in
Stroke
24.02in
Swept Volume
6181.7in3
Configuration
12,16 Cylinder
Bore
18.1in
Stroke
24.02in
Swept Volume
6181.7in³

Generator Set Dimensions and Weights (dependent on Generator Type)

Length
14740 - 16870 mm (580.3 - 664.2 in)
Height
6493 - 6517 mm (255.6 - 256.6 in)

Generator Set Dimensions and Weights - Dependent on Generator Type

Weight
275.0 - 345.0 t (606271 - 760595 lbs)
Width
3890 - 4027 mm (153.1 - 158.5 in)
Height
6493 - 6517 mm (255.6 - 256.6 in)
Length
14740 - 16870 mm (580.3 - 664.2 in)

Features

Ease of installation

Reliable Operation

Ease of maintenance

Easy component accessibility

Standard Equipment

  • Air Inlet System
    • Air intake silencer / filter
  • Control System
    • Load sharing unit
    • Modular Alarm Control Protection System (MACS)
    • Speed governor
  • Cooling System
    • Electric cooling water preheater
    • HT cooling water pump (engine driven)
    • 2-stage charge air cooler
  • Exhaust System
    • Exhaust gas expansion joint
    • Exhaust gas insulated manifolds
    • Turbocharger at flywheel end / counter-flywheel end
  • Fuel System
    • Fuel circulating pump (electric driven / for MDO/MGO only)
    • Fuel indicator filter
    • Fuel pressure valve (separate / for MDO/MGO only)
  • Gas System
    • Gas valve unit
  • Instrumentation
    • Control push buttons and lamps
    • Emergency stop lever
    • Local control panel
    • Pressure and temperature indicator
  • Lube System
    • Dry sump
    • Lube oil plate cooler (separate)
    • Lube oil pump (engine driven)
    • Lube oil safety filter
    • Lube oil self-cleaning filter
    • Pressure regulating valve
  • Mounting System
    • High flexible coupling
    • Rigid mounting
  • Starting System
    • Electrical barring device
    • Starting air valve
  • General
    • Torsional Vibration Calculation (TVC)

Optional Equipment

  • Air Inlet System
    • Air inlet shut-off valve
    • Air intake transition piece
    • Expansion joint
    • Silencer / filter
  • Control System
    • Engine alarm system
    • Remote control system
    • Remote indicators (start air pressure, engine speed, etc.)
    • Starter for electric driven pumps
    • 24 DC UPS
  • Cooling System
    • Cooling water piping for generator cooling on base frame
    • Cooling water piping for lubricating oil cooler on base frame
    • Cooling water preheater steam / thermal oil / electrical
    • FW/SW plate cooler
    • HT cooling water pump (electric driven)
    • LT cooling water pump (electric driven)
    • Sea water cooling pump (electric driven)
    • Temperature contol valve
  • Exhaust System
    • Exhaust gas ventilation module
    • Silencer (with or withour spark arrester)
  • Fuel System
    • Fuel oil cooler
    • HFO final preheater
    • HFO pressure regulating valve
    • HFO self-cleaning automatic filter
    • HFO supply and booster pumps (electrical driven)
    • HFO treatment and supply modules
    • HFO viscosity control device
    • Mixing tank
  • Gas System
    • Gas flowmeter
    • LNG vaporizing system
  • Lube System
    • Lube oil centrifuge
    • Lube oil pump (electrical driven)
    • Lube oil treatment and combined modules
    • Pre-lubricating oil pump (electrical driven)
    • Temperature control valve
    • Wet sump with dip stick
  • Mounting System
    • Double resilient mounting
    • Flexible pipe connections
    • Resilient mounting
  • Propulsion System
    • Control system
    • Thrusters
  • Starting System
    • Starting air compressor
    • Starting air receiver
  • General
    • Engine PTO coupling
    • Flywheel cover
    • PTO alternator
    • PTO shaft on counter-flywheel end
    • Reduction gear
    • Reduction gear PTO coupling