AP255E Paver

Photos

With a single operator, the AP255E meets all requirements for small and medium sized jobsites. Easy, simplified driving – with controls which give precise, immediate response. The AP255E is a compact, extremely versatile paver finisher, ideal for small jobsites in urban centers. For sidewalks, cycle paths, playgrounds, trench back filling and all maintenance and repair work, where it shows its notable qualities and features. This paver is designed to operate in limited spaces, thanks to its compactness and exceptional maneuverability.

Gross Power
46.0 hp
Standard Paving Width
1400 mm - 2600 mm (4.6 - 8.5 ft)
Maximum Operating Weight
9921.0 lb
Displacement
135.0 in3

Specs

Engine

Gross Power
46.0hp
Displacement
135.0in3
Engine Model
Cat C2.2
Gross Power
46HP
Displacement
135in³
Engine Model
Cat C2.2

Operating Specifications

Standard Paving Width
1400 mm - 2600 mm (4.6 - 8.5 ft)
Hopper Capacity
109.0ft3
Inside Turning Radius
2.3ft
Maximum Paving Speed with Vibratory Screed
108.0ft/min
Maximum Travel Speed
2.0mph
Paving Width Minimum
0.5ft
Paving Width Maximum
11.08ft
Truck Dump Height
23in
Truck Entry Width
9.8ft
Standard Paving Width
1400 mm - 2600 mm (4.6 - 8.5 ft)
Hopper Capacity
109ft³
Inside Turn Radius
2.3ft
Maximum Paving Speed - With Vibratory Screed
108ft/min
Maximum Travel Speed
2mile/h

Weights

Maximum Operating Weight
9921.0lb
Operating Weight - With Screed
9921lb
Maximum Operating Weight
9921lb

Service Refill Capacities

Fuel Tank Capacity
17.0gal
Cooling System
4.49gal
Hydraulic Oil Tank
19.28gal (US)
Fuel Tank Capacity
17gal (US)
Cooling System
4.49gal (US)

Dimensions

Maximum Height
8.3ft
Track Contact Length
4.6ft
Overall Height
8.3ft
Inside Turn Radius
2.3ft
Length - With Push Roller and Largest Screed
13.8ft
Length - With Push Roller and Screed
13.8ft
Tractor Operating Width
9.83ft
Transport Height
5.75ft
Transport Width - Hoppers Raised - Screed End Gates Attached
5.25ft
Maximum Height
8.3ft

Drive System

Maximum Paving Speed
108.27ft/min

Hopper

Hopper Capacity
109.48ft³

Features

Undercarriage

The machine's tracked undercarriage, fitted with heavy-duty rubber bonded pads, provides excellent stability and weight distribution minimising the negative effect of an uneven base. Track tension is assured by two grease pistons with a shock absorbing system.

The machine's tracked undercarriage, fitted with heavy-duty rubber bonded pads, provides excellent stability and weight distribution minimising the negative effect of an uneven base. Track tension is assured by two grease pistons with a shock absorbing system.

Cat® C2.2 Engine

Reliable Cat® C2.2 engine provides ample power and is EU Stage IIIb and U.S. Tier 4 Interim emissions compliant.

Reliable Cat® C2.2 engine provides ample power and is EU Stage IIIb and U.S. Tier 4 Interim emissions compliant.

AS3143 Electric Screed

The electric heated screed is powered by an onboard generator with independent temperature control in all four sections. Three heating elements for each screed section ensure uniform heating over the entire screed plate.

The electric heated screed is powered by an onboard generator with independent temperature control in all four sections. Three heating elements for each screed section ensure uniform heating over the entire screed plate.

Material Feeding System

The hoppers are hydraulically operated and independently controlled facilitating applications close to walls or other vertical objects. The asphalt mix is carried to the screed by a heavy-duty steel conveyor and is distributed by two independently controlled augers, with reversible rotation. Three automatic material feed sensors provide correct amount of material to the screed. Augers can be hydraulically raised to avoid obstacles, facilitate machine loading on trailer and assembly of the paving width reduction option group. Conveyor and augers are reversible.

The hoppers are hydraulically operated and independently controlled facilitating applications close to walls or other vertical objects. The asphalt mix is carried to the screed by a heavy-duty steel conveyor and is distributed by two independently controlled augers, with reversible rotation. Three automatic material feed sensors provide correct amount of material to the screed. Augers can be hydraulically raised to avoid obstacles, facilitate machine loading on trailer and assembly of the paving width reduction option group. Conveyor and augers are reversible.

Operator's Platform

The operator drives the paver from the platform positioned behind the screed. The console panel is fully equipped with comprehensive controls allowing a single operator to conveniently monitor all machine functions. The operator platform is fitted with an operator presence detector enabling machine functions when the operator is in the driving position.

The operator drives the paver from the platform positioned behind the screed. The console panel is fully equipped with comprehensive controls allowing a single operator to conveniently monitor all machine functions. The operator platform is fitted with an operator presence detector enabling machine functions when the operator is in the driving position.

Serviceability

The AP255E ensures excellent access to all machine parts requiring scheduled maintenance. Large access doors provide quick and easy inspection of main components.

The AP255E ensures excellent access to all machine parts requiring scheduled maintenance. Large access doors provide quick and easy inspection of main components.

Standard Equipment

Optional Equipment

  • Power supply, 110V or 230V
  • Grade & Slope Control
  • Mechanical Feed Sensor
  • Central Paving Width Reduction Package - 0.5 m to 1.40 m
  • Right Side Paving Width Reduction Package - 0.15 m to 1.00 m
  • Mechanical (bolt-on) extensions to reach 3.40 m paving width