340 Straight Boom Excavator

Photos

Engine Model
C9.3B
Engine Power - ISO 14396
347 HP
Bore
5 in
Stroke
6 in

Specs

Engine

Engine Model
C9.3B
Engine Power - ISO 14396
347HP
Bore
5in
Stroke
6in
Displacement
568in³
Net Power - ISO 9249
346HP
Net Power - ISO 9249 (DIN)
351hp (metric)
Engine Power - ISO 14396 (DIN)
352hp (metric)
Biodiesel Capability
Up to B20¹
Emissions
Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,900 rpm. Advertised power is tested per the specified standard in effect at the time
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Hydraulic System

Main System - Maximum Flow
560 l/min (148 gal/min)
Maximum Pressure - Equipment
5076psi
Maximum Pressure - Equipment - Lift Mode
5511psi
Maximum Pressure - Travel
5076psi
Maximum Pressure - Swing
4264psi

Swing Mechanism

Swing Speed
8.84r/min
Maximum Swing Torque
10741ft·lbf

Weights

Operating Weight
87800lb
Note (1)
Long undercarriage, Straight boom, R3.9DB (12'10") stick, GD 2.27 m³ (2.97 yd³) bucket, 700 mm (28") triple grouser shoes, and 9.0 mt (19,800 lb) counterweight.

Service Refill Capacities

Fuel Tank Capacity
158.5gal (US)
Cooling System
10.5gal (US)
Engine Oil
8.5gal (US)
Swing Drive
4.8gal (US)
Final Drive - Each
2.1gal (US)
Hydraulic System - Including Tank
98.5gal (US)
Hydraulic Tank
42.5gal (US)
DEF Tank
21.1gal (US)

Dimensions

Note (1)
340 SB with R3.9 m DB stick (12' 10"), 2.27 m3 (2.97 yd3) GD bucket, long undercarriage with 600 mm (24") TG HD tracks
Shipping Height - Top of Cab
11ft
Shipping Length
37.4ft
Tail Swing Radius
11.6ft
Counterweight Clearance
4.1ft
Ground Clearance
1.7ft
Track Length
16.5ft
Track Length to Center of Rollers
13.3ft
Track Gauge
8.5ft
Transport Width
10.9ft
Cab Height - With FOGS
11.5ft
Note (2)
700 mm (28") Track Shoe
Boom
Straight 6.9 m (22'8")
Stick
Reach 3.9 m (12'10")
Bucket
GD 2.27 m³ (2.97 yd³)
Cab Height - With OPG
11.5ft

Working Ranges and Forces

Maximum Pin Height at Stick Nose
39.4ft
Maximum Weight at Stick Nose
9170lb
Note (1)
340 SB with R3.9 m DB stick (12' 10"), 2.27 m3 (2.97 yd3) GD bucket, long undercarriage with 600 mm (24") TG HD tracks
Maximum Digging Depth
21.8ft
Maximum Cutting Height
45.2ft
Maximum Loading Height
33.6ft
Minimum Loading Height
11ft
Maximum Depth Cut for 2440 mm (8'0") Level Bottom
21.4ft
Maximum Vertical Wall Digging Depth
18.5ft
Bucket Digging Force -ISO
47150lbf
Stick Digging Force - ISO
32440lbf
Maximum Reach at Ground Level
40.5ft
Boom
Straight 6.9 m (22'8")
Stick
Reach 3.9 m (12'10")
Bucket
GD 2.27 m³ (2.97 yd³)

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons).

Features

LATEST FEATURES

        

  • Cab Monitor Improvements.
        

  1. Continuously improved user interface allows for intuitive navigation, minimizing performance interruption with the easy-to-use touchscreen menu.
  2.     

  3. Identify apps quickly with a grid list view, abbreviated app names, and categorized menu options.
  4.     

  5. A notification center keeps important information visible to the operator, and displays messages without shrinking the camera view.
  6.     

  7. Color coded notifications set critical messages apart from the rest.
  8.     

  9. Use the in-monitor QR code to learn about machine and technology features through a full suite of “how-to” videos.

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area. Build Number: 08C

        

  • Cab Monitor Improvements.
        

  1. Continuously improved user interface allows for intuitive navigation, minimizing performance interruption with the easy-to-use touchscreen menu.
  2.     

  3. Identify apps quickly with a grid list view, abbreviated app names, and categorized menu options.
  4.     

  5. A notification center keeps important information visible to the operator, and displays messages without shrinking the camera view.
  6.     

  7. Color coded notifications set critical messages apart from the rest.
  8.     

  9. Use the in-monitor QR code to learn about machine and technology features through a full suite of “how-to” videos.

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area. Build Number: 08C

DO MORE WITH LESS FUEL

        

  • Expect high fuel efficiency – more work per unit of fuel.
  •     

  • Match the excavator to the job with three power modes – Power, Smart, and Eco. Smart mode automatically matches engine and hydraulic power to working conditions, providing max power when needed and reducing power when it isn’t to help save fuel.
  •     

  • Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments, including the heaviest tools needed for demolition work.
  •     

  • Don’t let the temperature stop you from working. This excavator has a high-ambient capability of 52° C (125° F) and cold start capability of –18° C (0° F).
  •     

  • Advansys™ bucket tips increase production and lower costs with more tip life.
  •     

  • The Cat PL161 attachment locator is a Bluetooth® device designed to let users know where their attachments are across all worksites, reduce the number of lost attachments, and plan for attachment maintenance and replacement. The PL161 integrates easily into VisionLink® for full fleet management of machines and attachments from one smartphone or tablet dashboard to view location and tracking details.

 

        

  • Expect high fuel efficiency – more work per unit of fuel.
  •     

  • Match the excavator to the job with three power modes – Power, Smart, and Eco. Smart mode automatically matches engine and hydraulic power to working conditions, providing max power when needed and reducing power when it isn’t to help save fuel.
  •     

  • Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments, including the heaviest tools needed for demolition work.
  •     

  • Don’t let the temperature stop you from working. This excavator has a high-ambient capability of 52° C (125° F) and cold start capability of –18° C (0° F).
  •     

  • Advansys™ bucket tips increase production and lower costs with more tip life.
  •     

  • The Cat PL161 attachment locator is a Bluetooth® device designed to let users know where their attachments are across all worksites, reduce the number of lost attachments, and plan for attachment maintenance and replacement. The PL161 integrates easily into VisionLink® for full fleet management of machines and attachments from one smartphone or tablet dashboard to view location and tracking details.

 

WORK IN COMFORT

        

  • The demolition cab comes with a deluxe heated seat and climate control.
  •     

  • Get in and out of the cab easier with the tip-up left console.
  •     

  • Control the excavator comfortably with easy-to-reach controls all located in front of you.
  •     

  • Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, document holder, bottle holder, and coat hook are also provided.
  •     

  • Use the standard radio’s USB ports and Bluetooth® technology to connect personal devices and make hands-free calls.
        

  • The demolition cab comes with a deluxe heated seat and climate control.
  •     

  • Get in and out of the cab easier with the tip-up left console.
  •     

  • Control the excavator comfortably with easy-to-reach controls all located in front of you.
  •     

  • Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, document holder, bottle holder, and coat hook are also provided.
  •     

  • Use the standard radio’s USB ports and Bluetooth® technology to connect personal devices and make hands-free calls.

SIMPLE TO OPERATE

        

  • Start the engine with a push button; use a Bluetooth® key fob or the unique Operator ID function.
  •     

  • Program your power mode and joystick preferences using operator ID; the excavator will remember them every time you go to work.
  •     

  • Automatic hydraulic oil warmup gets you to work faster in cold temperatures and helps prolong the life of components.
  •     

  • Navigate quickly on the standard high-resolution 254 mm (10 in) touchscreen monitor or with the aid of the jog dial control.
  •     

  • Make moving the excavator much easier with Cat Stick Steer. Simply push a button and use one hand to travel and turn instead of both hands or feet on levers or pedals.
  •     

  • Need more lift during your shift? Auto heavy lift gives you 8% more power exactly when you need it for as long as you need it.
  •     

  • Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fingertips in the touchscreen monitor.
        

  • Start the engine with a push button; use a Bluetooth® key fob or the unique Operator ID function.
  •     

  • Program your power mode and joystick preferences using operator ID; the excavator will remember them every time you go to work.
  •     

  • Automatic hydraulic oil warmup gets you to work faster in cold temperatures and helps prolong the life of components.
  •     

  • Navigate quickly on the standard high-resolution 254 mm (10 in) touchscreen monitor or with the aid of the jog dial control.
  •     

  • Make moving the excavator much easier with Cat Stick Steer. Simply push a button and use one hand to travel and turn instead of both hands or feet on levers or pedals.
  •     

  • Need more lift during your shift? Auto heavy lift gives you 8% more power exactly when you need it for as long as you need it.
  •     

  • Not sure how a function works or how to maintain the excavator? Always have the operator’s manual at your fingertips in the touchscreen monitor.

LOWER MAINTENANCE COSTS

        

  • Expect low maintenance cost with extended and synchronized service intervals.
  •     

  • Check hydraulic system oil and easily drain fuel system water and fuel tank water from ground level.
  •     

  • Track your excavator’s filter life and maintenance intervals via the in-cab monitor.
  •     

  • Change all fuel filters at a synchronized 1,000 hours. Oil and fuel filters grouped and located on right-hand side of machine for easy maintenance.
  •     

  • The air intake filter with pre-cleaner has high dust holding capacity.
  •     

  • The hydraulic oil filter provides improved filtration performance; anti-drain valves keep oil clean when the filter is replaced.
  •     

  • The high-efficiency hydraulic fan has an optional automatic reverse function to keep cores free from debris, eliminating the need for any operator interaction.
  •     

  • S·O·SSM ports simplify maintenance and allow for quick, easy extraction of fluid samples for analysis.
        

  • Expect low maintenance cost with extended and synchronized service intervals.
  •     

  • Check hydraulic system oil and easily drain fuel system water and fuel tank water from ground level.
  •     

  • Track your excavator’s filter life and maintenance intervals via the in-cab monitor.
  •     

  • Change all fuel filters at a synchronized 1,000 hours. Oil and fuel filters grouped and located on right-hand side of machine for easy maintenance.
  •     

  • The air intake filter with pre-cleaner has high dust holding capacity.
  •     

  • The hydraulic oil filter provides improved filtration performance; anti-drain valves keep oil clean when the filter is replaced.
  •     

  • The high-efficiency hydraulic fan has an optional automatic reverse function to keep cores free from debris, eliminating the need for any operator interaction.
  •     

  • S·O·SSM ports simplify maintenance and allow for quick, easy extraction of fluid samples for analysis.

BUILT-IN SAFETY FEATURES

        

  • The front windshield and top hatch are made with EN 356 P5A glazing for enhanced impact resistance.
  •     

  • The standard ROPS cab meets ISO 12117-2:2008 requirements.
  •     

  • Operator Protective Guards (OPG) enhances overhead safety.
  •     

  • A travel direction indicator helps operators know which way to activate the travel levers.
  •     

  • Enjoy great visibility with the help of narrow cab pillars, large windows, the standard parallel roof wiper and washer, and a flat engine hood design.
  •     

  • A ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.
  •     

  • Rearview and sideview cameras are standard. Upgrade to 360° visibility and you’ll easily visualize objects and personnel around the excavator in a single view.
  •     

  • Serrated steps and anti-skid punch plate on the service platform help prevent slipping.
  •     

  • Make service work easier and safer with optional inspection lighting. With the flip of a switch, lights will illuminate the engine, pump, battery, and radiator compartments to enhance visibility.
  •     

  • Standard 2D E-Fence integrated right out of the factory prevents the excavator from moving outside of operator-defined set points.
        

  • The front windshield and top hatch are made with EN 356 P5A glazing for enhanced impact resistance.
  •     

  • The standard ROPS cab meets ISO 12117-2:2008 requirements.
  •     

  • Operator Protective Guards (OPG) enhances overhead safety.
  •     

  • A travel direction indicator helps operators know which way to activate the travel levers.
  •     

  • Enjoy great visibility with the help of narrow cab pillars, large windows, the standard parallel roof wiper and washer, and a flat engine hood design.
  •     

  • A ground-level shutoff switch stops all fuel to the engine when activated and shuts down the machine.
  •     

  • Rearview and sideview cameras are standard. Upgrade to 360° visibility and you’ll easily visualize objects and personnel around the excavator in a single view.
  •     

  • Serrated steps and anti-skid punch plate on the service platform help prevent slipping.
  •     

  • Make service work easier and safer with optional inspection lighting. With the flip of a switch, lights will illuminate the engine, pump, battery, and radiator compartments to enhance visibility.
  •     

  • Standard 2D E-Fence integrated right out of the factory prevents the excavator from moving outside of operator-defined set points.

EFFICIENCY THROUGH TECHNOLOGY

        

  • Standard Cat Grade with 2D indicates depth and slope on the monitor with auditory alerts.
  •     

  • Cat Payload onboard weighing helps you achieve precise load targets to improve your operating efficiency. Pick up a load of material – with either a bucket or grapple – and get a real-time weight estimate without even swinging.
  •     

  • Combine Payload with VisionLink® and remotely manage your production targets. The monitor’s USB port lets you download results from one shift all the way up to 30 days of work, so you can manage your progress without needing an internet connection or VisionLink subscription.
  •     

  • Know the excavator’s exact position relative to GPS and GLONASS systems. The machine automatically compensates for excavator pitch and roll caused by sloping ground conditions.
  •     

  • VisionLink® provides actionable data insights for all assets - regardless of fleet size or equipment manufacturer.* Review equipment data from your desktop or mobile device to maximize uptime and optimize assets. Dashboards provide information such as hours, miles, location, idle time, and fuel utilization. Make informed decisions that lower costs, simplify maintenance, and improve safety and security on your jobsite.
  •     

  • VisionLink Productivity gathers and summarizes machine telematics and jobsite data from all your equipment – regardless of the manufacture.* View actionable information such as idle time, fuel burn, location, payload, load counts, total cycles, and more to improve machine efficiency, productivity, and utilization. Access data anywhere via a mobile, tablet, or desktop device - on or off the jobsite.
  •     

  • Remote Troubleshoot is a mobile application that allows your Cat dealer to perform diagnostic testing on your connected machine remotely to help ensure that issues are resolved quickly and with less downtime.
  •     

  • Remote Flash is a mobile application that allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency.
  •     

  • The Cat PL161 attachment locator allows you to track attachments across all worksites, reduce the number of lost attachments, and plan for attachment maintenance and replacement. The work tool recognition feature automatically adjusts machine settings based on the selected tool.

*Data field availability can vary by equipment manufacturer.
 

        

  • Standard Cat Grade with 2D indicates depth and slope on the monitor with auditory alerts.
  •     

  • Cat Payload onboard weighing helps you achieve precise load targets to improve your operating efficiency. Pick up a load of material – with either a bucket or grapple – and get a real-time weight estimate without even swinging.
  •     

  • Combine Payload with VisionLink® and remotely manage your production targets. The monitor’s USB port lets you download results from one shift all the way up to 30 days of work, so you can manage your progress without needing an internet connection or VisionLink subscription.
  •     

  • Know the excavator’s exact position relative to GPS and GLONASS systems. The machine automatically compensates for excavator pitch and roll caused by sloping ground conditions.
  •     

  • VisionLink® provides actionable data insights for all assets - regardless of fleet size or equipment manufacturer.* Review equipment data from your desktop or mobile device to maximize uptime and optimize assets. Dashboards provide information such as hours, miles, location, idle time, and fuel utilization. Make informed decisions that lower costs, simplify maintenance, and improve safety and security on your jobsite.
  •     

  • VisionLink Productivity gathers and summarizes machine telematics and jobsite data from all your equipment – regardless of the manufacture.* View actionable information such as idle time, fuel burn, location, payload, load counts, total cycles, and more to improve machine efficiency, productivity, and utilization. Access data anywhere via a mobile, tablet, or desktop device - on or off the jobsite.
  •     

  • Remote Troubleshoot is a mobile application that allows your Cat dealer to perform diagnostic testing on your connected machine remotely to help ensure that issues are resolved quickly and with less downtime.
  •     

  • Remote Flash is a mobile application that allows you to update onboard software without a technician being present, allowing you to initiate software updates when convenient, increasing your overall operating efficiency.
  •     

  • The Cat PL161 attachment locator allows you to track attachments across all worksites, reduce the number of lost attachments, and plan for attachment maintenance and replacement. The work tool recognition feature automatically adjusts machine settings based on the selected tool.

*Data field availability can vary by equipment manufacturer.
 

SUSTAINABILITY

        

  • The Cat® C9.3B engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
  •     

  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
  •     

  • Auto Engine Speed Control helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
  •     

  • Cat Grade technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy.
  •     

  • Cat® Payload for excavators provides on-the-go material weighing which helps reduce fuel burn by improving loading efficiency, job site productivity, and eliminating trips to the scale.
  •     

  • Cat® 2D E-fence keeps the front linkage within a predefined work area to avoid hazards such as traffic - not only helping keep personnel safe but also helps you avoid repairs, downtime, and costly job site fines.
  •     

  • Don't waste fuel idling. Cat VisionLink® online fleet monitoring helps you manage idle time and reduce fuel burn and greenhouse gas emissions.
  •     

  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
**Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

        

  • The Cat® C9.3B engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
  •     

  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
  •     

  • Auto Engine Speed Control helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
  •     

  • Cat Grade technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy.
  •     

  • Cat® Payload for excavators provides on-the-go material weighing which helps reduce fuel burn by improving loading efficiency, job site productivity, and eliminating trips to the scale.
  •     

  • Cat® 2D E-fence keeps the front linkage within a predefined work area to avoid hazards such as traffic - not only helping keep personnel safe but also helps you avoid repairs, downtime, and costly job site fines.
  •     

  • Don't waste fuel idling. Cat VisionLink® online fleet monitoring helps you manage idle time and reduce fuel burn and greenhouse gas emissions.
  •     

  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).
**Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Standard Equipment

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Boom And Sticks
    • 6.9 m (22'8") Straight boom
  • Cab
    • ROPS, advanced sound suppression
    • High-resolution 254 mm (10") LCD touch screen monitor
    • Heated seat with air-adjustable suspension
  • Cat Technology
    • VisionLink®
    • Remote Flash
    • Remote Troubleshoot
    • Cat Grade 2D
    • Cat Assist
    • Cat Payload
  • Electrical System
    • Maintenance-free 1,000 CCA batteries (x2)
    • Centralized electrical disconnect switch
    • LED chassis light
  • Engine
    • Three selectable modes: Power, Smart, Eco
    • Auto engine speed control
    • 2300 m (7,546 ft) altitude capability with no engine power de-rating
    • 52° C (126° F) high-ambient cooling capacity
    • -18° C (0° F) cold start capability
    • Double element air filter with integrated pre-cleaner
  • Hydraulic System
    • Boom and stick regeneration circuit
    • Electronic main control valve
    • Heavy lift mode
    • Auto hydraulic oil warmup
    • Reverse swing damping valve
    • Auto swing parking brake
    • High performance hydraulic return filter
    • Two speed travel
    • Bio hydraulic oil capability
  • Safety And Security
    • 2D E-fence
    • Auto hammer stop
    • Caterpillar One Key security system
    • Lockable external tool / storage box
    • Lockable door, fuel and hydraulic tank locks
    • Lockable fuel drain compartment
    • Lockable disconnect switch
    • Service platform with anti-skid plate and recessed bolts
    • Right-hand handrail and hand hold
    • Standard visibility mirror package
    • Signaling / warning horn
    • Ground-level secondary engine shutoff switch
    • Rear and sideview cameras
    • Boom lowering check valve (optional in North America)
    • Stick lowering check valve (optional in North America)
  • Service And Maintenance
    • Grouped location of engine oil & fuel filters
    • Sampling ports for Scheduled Oil Sampling (S·O·S℠)
    • Integrated vehicle health management system
  • Undercarriage And Structures
    • Towing eye on base frame
    • 9.0 mt (19,842 lb) counterweight

Optional Equipment

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Boom And Sticks
    • 3.2 m (10'6") Reach stick
    • 3.9 m (12'10") Reach stick
  • Cat Technology
    • VisionLink Productivity
    • Cat Grade 2D with Attachment Ready Option (ARO)
    • Cat Grade 3D single GNSS
    • Cat Grade 3D dual GNSS
  • Electrical System
    • Premium surround lighting package
  • Engine
    • Cold start block heaters
    • Auto reverse fan
    • -32° C (-25° F) cold start capability
  • Hydraulic System
    • SmartBoom (Europe only)
    • Combined two-way auxiliary circuit with direct return
    • Medium-pressure auxiliary circuit
    • Cooling circuit
    • Quick coupler circuit for Cat Pin Grabber and CW Dedicated
  • Safety And Security
    • Cat Command (remote control)
    • Travel alarm (standard in North America)
    • Swing alarm
    • 360° visibility
  • Service And Maintenance
    • Preventative maintenance ready (Quick Evac)
    • Electric refueling pump with auto shutoff
  • Undercarriage And Structures
    • Long undercarriage
    • Long Narrow undercarriage
    • 600 mm (24") HD triple grouser track shoes
    • 700 mm (28") triple grouser track shoes
    • 850 mm (33") HD triple grouser track shoes