990K Millyard Arrangement Wheel Loader

Photos

Net Power
699 hp
Operating Weight
202398 lb
Engine Model
Cat® C27 ACERT™
Net Power – SAE J1349
699 hp

Specs

Engine

Net Power
699hp
Engine Model
Cat® C27 ACERT™
Net Power – SAE J1349
699hp
Bore
5.4in
Stroke
6.0in
Displacement
1649.5in3
Torque Rise
18.0%
Rated Speed
1,800 rpm
Emissions
U.S. EPA Tier 4 Final or Tier 2 equivalent
Gross - ISO 14396
752HP
Peak Torque - 1,200 rpm
2624lb/ft
Rated Speed - Gross - ISO 14396
752HP
Rated Speed - Gross - SAE J1995
766HP
Rated Speed - Net Power - SAE J1349 - High Ambient
648HP
Rated Speed - Net Power - SAE J1349 - Standard Ambient
699HP
Net Power
699HP
Engine Model
Cat® C27 ™
Bore
5.4in
Stroke
6in
Displacement
1649.5in³
Torque Rise
18%
Rated Speed
1,800/min
Emissions
U.S. EPA Tier 4 Final or Tier 2 equivalent
Net Power - SAE J1349
699HP

Operating Specifications

Operating Weight
202398lb
Tipping Load – Articulated 35°
81896lb
Tipping Load - Straight
92990lb
Operating Weight
202398lb
Tipping Load - Articulated 35°
81896lb

Transmission

Transmission Type
Cat planetary power shift
Forward 1
4.5mph
Forward 2
8.3mph
Forward 3
14.2mph
Reverse 1
4.9mph
Reverse 2
9.1mph
Reverse 3
15.5mph
Direct Drive Forward 2
8.5mph
Direct Drive Reverse 1
5.4mph
Direct Drive Reverse 2
9.6mph
Direct Drive - Forward 1
Lock-up disabled
Direct Drive - Forward 3
15.2mile/h
Direct Drive - Reverse 3
16.4mile/h
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Transmission Type
Cat-Planetenlastschaltgetriebe
Forward - 1
4.5mile/h
Forward - 2
8.3mile/h
Forward - 3
14.2mile/h
Reverse - 1
4.9mile/h
Reverse - 2
9.1mile/h
Reverse - 3
15.5mile/h
Direct Drive - Forward 2
8.5mile/h
Direct Drive - Reverse 1
5.4mile/h
Direct Drive - Reverse 2
9.6mile/h
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.

Axles

Front
Fixed
Rear
Trunnion
Oscillation Angle
8.5°
Front
Fixed
Rear
Trunnion
Oscillation Angle
8.5°

Hydraulic Cycle Time

Rack Back
4.8Seconds
Raise
9.4Seconds
Dump
2.9Seconds
Lower Float Down
3.6Seconds

Hydraulic System – Steering

Steering System – Circuit
Pilot, load sensing
Steering System – Pump
Piston, variable displacement
Total Steering Angle
70°

Service Refill Capacities

Fuel Tank
294.3gal
Cooling System
54.9gal
Transmission
29.1gal
Differentials and Final Drives – Front
71.6gal
Differentials and Final Drives – Rear
68.9gal
Engine Crankcase
20.0gal
Hydraulic System Factory Fill
210gal (US)
Hydraulic Tank - Implement and Hydraulic Fan
68.9gal (US)
Hydraulic Tank - Steering and Braking
34.9gal (US)
Fuel Tank
294.3gal (US)
Cooling System
54.9gal (US)
Transmission
29.1gal (US)
Differential - Final Drives - Front
71.6gal (US)
Differential - Final Drives - Rear
68.9gal (US)
Engine Crankcase
20gal (US)

Sound Performance – Standard

Machine Sound Level (ISO 6395:2008)
115dB(A)

Hydraulic System – Lift/Tilt

Cylinders, Double Acting: Lift, Bore and Stroke
254 mm × 1264 mm (10.0 in × 49.8 in)
Cylinders, Double Acting: Tilt, Bore and Stroke
317.5 mm × 819 mm (12.5 in × 32.2 in)
Pilot System
Open loop and pressure reducing
Relief Valve Setting – Lift/Tilt
4786psi

Sound Performance – Suppression

Machine Sound Level (ISO 6395:2008)
113dB(A)

Brakes

Brakes
SAE J1473 OCT90, ISO 3450:1992
Brakes
SAE J1473 OKT90, ISO 3450:1992

Hydraulic Cycle Times

Lower
3.7s
Raise
9.4s
Dump
2.9s
Lower Float Down
3.6s
Rack Back
4.8s

Hydraulic System - Steering

Relief Valve Setting - Steering
4641psi
Maximum Flow at 1,400 rpm
94.5gal/min
Steering System - Circuit
Pilot, load sensing
Steering System - Pump
Piston, variable displacement
Total Steering Angle
70°

Sound Performance - Standard

Operator Sound Level (ISO 6396:2008)
69dB(A)
Machine Sound Level (ISO 6395:2008)
115dB(A)

Hydraulic System - Lift/Tilt

Lift/Tilt System
Variable displacement piston
Maximum Flow at 1,800 rpm (1)
216gal/min
Maximum Flow at 1,800 rpm (2)
22.2gal/min
Relief Valve Setting - Main
507psi
Cylinders, Double Acting - Lift, Bore and Stroke
254 mm × 1264 mm (10.0 in × 49.8 in)
Cylinders, Double Acting - Tilt, Bore and Stroke
317.5 mm × 819 mm (12.5 in × 32.2 in)
Lift/Tilt System - Circuit
Positive flow control
Pilot System
Open loop and pressure reducing
Relief Valve Setting - Lift/Tilt
4786psi

Sound Performance - Suppression

Operator Sound Level (ISO 6396:2008)
69dB(A)
Machine Sound Level (ISO 6395:2008)
113dB(A)

Forks

Fork End Area
78ft²

Dimensions - Millyard Linkage - Approximate

Ground to Top of ROPS
17.2ft
Ground to Top of Exhaust Stacks
16.6ft
Ground to Top of Hood
12.7ft
Ground to Bumper Clearance
3.1ft
Rear Axle - Centerline to Bumper
12.5ft
Front Axle Centerline to Fork Tip
17.6ft
Wheel Base
15.1ft
Maximum Overall Length
45.4ft
Ground to Lower Hitch Clearance
2ft
Ground to Center of Front Axle
3.9ft
Fork Height with Level Arms
8.9ft
Fork Top Clamp Opening
12.3ft
Fork Height at Maximum Lift
18.3ft
Hinge Pin Height at Maximum Lift
19.4ft
Dump Angle at Maximum Lift
29.3 degrees

Features

POWERFUL EFFICIENCY

LONG TERM VALUE AND DURABILITY

PROVEN RELIABILITY

PERFORMANCE AND PRODUCTIVITY

OPERATOR COMFORT AND CONTROL

PRODUCTIVITY WITH TECHNOLOGY

SAVE ON SERVICE AND MAINTENANCE

TOP-TIER SERVICE AND SUPPORT

SAFETY FIRST

REDUCE ENVIRONMENTAL IMPACT

PURPOSE-BUILT CAT ATTACHMENTS

Standard Equipment

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Air conditioner and heater with automatic temperature control
    • Cab, sound-suppressed pressurized, protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers and converter (12V, 10-15 amp)
    • 12V power port for mobile phone or laptop connection
    • Camera, rear vision
    • Cigar lighter and ashtray
    • Coat hook
    • Electro-hydraulic tilt and lift controls (seat mounted)
    • Flip-up armrest
    • Heater and defroster
    • Horn, electric
    • Implement hydraulic lockout
    • Instrumentation, gauges: – Engine coolant temperature – Fuel level – Ground speed – Gear – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
    • Instrumentation, warning indicators: – Action alert system, three category – Automatic transmission model enable status – Brake malfunction – Bucket float status – Delayed engine shutdown status – Engine idle shutdown status – Engine malfunction – Fuel economy mode enable status – Hydraulic lockout – Lockup clutch enable status – Low fuel level – Parking brake status – Rimpull control enable status – Seatbelt warning – Secondary steering (if equipped) – Throttle lock status – Transmission gear
    • Keypad, control with indicator lights: – Auto trans mode speed range – Auto/manual transmission mode – Fuel economy mode – Implement kickout – Lockup clutch – Reduced rimpull – Throttle lock
    • Light, dome (cab)
    • Lunchbox and beverage holders
    • Mirrors, rearview (externally mounted)
    • Seat, Cat comfort (cloth) air suspension
    • Seat belt, retractable, 76 mm (3 in) wide
    • STIC control system with steering lock
    • Tinted glass
    • Trainer seat with lap belt
    • Vital Information Management System (VIMS) 3G with graphical information display: external data port, customizable operator profiles, cycle timer, and integral Payload Control System (PCS): – Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
  • Power Train
    • Brakes, full hydraulic, enclosed, oil-disc
    • Axle-shaft oil-disc service brake
    • Electro hydraulic parking brake
    • Case drain filters
    • Cat clean emission module (Tier 4 Final only)
    • Demand fan
    • Engine Cat C27
    • Fuel priming pump (electric)
    • Ground level engine shutoff, bumper
    • Mufflers (under hood) (Tier 2 only)
    • Precleaner, engine air intake
    • Radiator, Aluminum Modular (AMR)
    • Separated cooling system
    • Starting aid, (ether) manual override
    • Throttle Lock
    • Torque Converter, Impeller Clutch with lock-up clutch feature and rimpull control system
    • Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
  • Electrical
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance free (2 – 1,400 CCA)
    • Converter, 10/15 amp, 24V to 12V
    • Deutsch component connectors
    • Electrical system, 24V
    • Electronic transmission control
    • Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
    • Starter, electric
    • Starter lockout in bumper
    • Starting receptacle for emergency start
    • Transmission lockout in bumper
  • Other
    • Automatic tilt/lift kickouts electronically adjustable from cab
    • Axle temperature sensor
    • Battery disconnect and jump start receptacle, bumper
    • Coupling, Caterpillar O-ring face seals
    • Economy mode with on demand throttle
    • Emergency platform egress
    • Engine, crankcase, 500 hour interval with CH4
    • Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown
    • Fenders, steel (front)
    • Guards, crankcase and power train
    • Grouped/labeled lube points
    • Hitch, drawbar with pin
    • Hoses, Cat XT™
    • Oil sampling valves
    • Positive flow control hydraulic system
    • Product Link
    • Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
    • Stairway, left and right rear access
    • Steering, load sensing
    • Toe kicks
    • Vandalism protection caplocks
    • Venturi stack
    • Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)

Optional Equipment

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Power Train
    • –50° C (–58° F) antifreeze
    • Engine oil change system, high speed, Wiggins
    • Engine block heater 120V or 240V
    • High ambient cooling – software
  • Operator Environment
    • Cab precleaner
    • AM/FM/CD/MP3 radio
    • Satellite Sirius radio with Bluetooth
    • LED warning strobe
    • CB radio ready
    • Window sun shade
  • Miscellaneous Attachments
    • Front and rear roading fenders
    • Fast fill fuel system (Shaw-Aero)
    • Axle oscillation stop
    • Heavy duty cab mounts