Caterpillar first introduced the 992 in 1968. This large wheel loader has been a global leader ever since, building a reputation as a face loader that’s both safe to operate, productive and durable. With the introduction of the K Series, we’ve enhanced the operator’s experience and the safety of those working on and around the machine. With both standard and high lift configurations, this machine will pass match with fleets of 775, 777, and 785 trucks. If your operations revolve around the 992 as a loading tool, you’ll find everything that’s important to your business in the 992K; safety, productivity, cost control and comfort for your people.
|
|
|
|
Specs
Engine
- Net Power
- 814hp
- Engine Model
- Cat® C32 ACERT™
- Emissions (U.S. EPA Tier 4 Final): Net Power – SAE J1349
- 814hp
- Bore
- 5.7in
- Stroke
- 6.4in
- Displacement
- 1963.5in3
- Emissions (U.S. EPA Tier 4 Final): Rated Speed
- 1750rpm
- Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995
- 900HP
- Emissions (U.S. EPA Tier 4 Final): Gross Power – ISO 14396
- 884hp
- Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1995
- 814HP
- Emissions (U.S. EPA Tier 4 Final): Peak Torque at 1,200 rpm - SAE J1995
- 3514lb/ft
- Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
- 907HP
- Emissions (Tier 2 Equivalent): Net Power - SAE J1349
- 814HP
- Emissions (Tier 2 Equivalent): Gross Power - ISO 14396
- 884HP
- Emissions (Tier 2 Equivalent): Rated Speed
- 1750r/min
- Emissions (Tier 2 Equivalent): Net Power - SAE J1995
- 814HP
- Emissions (Tier 2 Equivalent): Peak Torque at 1,200 rpm - SAE J1995
- 3537lb/ft
- Torque Rise
- 30%
- Note (Tier 4 Final) (1)
- These ratings apply at 1,750 rpm when tested under the specified standard conditions.
- Note (Tier 4 Final) (2)
- Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
- Note (Tier 2 Equivalent) (1)
- These ratings apply at 1,750 rpm when tested under the specified standard conditions.
- Note (Tier 2 Equivalent) (2)
- Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
- Net Power
- 814HP
- Engine Model
- Cat® C32 ACERT™
- Bore
- 5.7in
- Stroke
- 6.4in
- Displacement
- 1963.5in³
- Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1349
- 814HP
- Emissions (U.S. EPA Tier 4 Final): Rated Speed
- 1750r/min
- Emissions (U.S. EPA Tier 4 Final): Gross Power - ISO 14396
- 884HP
- Torque Rise
- 30%
Operating Specifications
- Operating Weight
- 220089lb
- Rated Payload – Standard (face material)
- 24tons
- Rated Payload – High Lift (face material)
- 21tons
- Bucket Capacity Range
- 10.7-12.3 m3 (14-16 yd3)
- Operating Weight – Standard
- 220089lb
- Operating Weight – High Lift
- 221847lb
- Operating Weight
- 220089lb
- Rated Payload - High Lift (Moderate to High Digging Resistance)
- 21t
- Rated Payload - Standard Lift (Moderate to High Digging Resistance)
- 24t
- Operating Weight - High Lift
- 221847lb
- Operating Weight - Standard
- 220089lb
Buckets
- Bucket Capacities
- 10.7-12.3 m3 (14-16 yd3)
- Bucket Capacities
- 10.7-12.3 m3 (14-16 yd3)
Transmission
- Transmission Type
- Cat Planetary Power Shift
- Forward 1
- 4.3mph
- Forward 2
- 7.4mph
- Forward 3
- 12.6mph
- Reverse 1
- 4.7mph
- Reverse 2
- 8.1mph
- Reverse 3
- 13.8mph
- Direct Drive – Forward 2
- 8.0mph
- Direct Drive – Reverse 1
- 4.9mph
- Direct Drive – Reverse 2
- 8.8mph
- Direct Drive - Forward 1
- Disabled
- Direct Drive - Forward 3
- 14.2mile/h
- Direct Drive - Reverse 3
- 15.4mile/h
- Transmission Type
- Cat Planetary Power Shift
- Forward - 1
- 4.3mile/h
- Forward - 2
- 7.4mile/h
- Forward - 3
- 12.6mile/h
- Reverse - 1
- 4.7mile/h
- Reverse - 2
- 8.1mile/h
- Reverse - 3
- 13.8mile/h
- Direct Drive - Forward 2
- 8mile/h
- Direct Drive - Reverse 1
- 4.9mile/h
- Direct Drive - Reverse 2
- 8.8mile/h
Axles
- Front
- Fixed
- Rear
- Oscillating
- Oscillation Angle
- 10° ±, 8° ± with Stops
- Front
- Fixed
- Rear
- Oscillating
- Oscillation Angle
- 10° ±, 8° ± with Stops
Hydraulic System – Steering
- Steering System – Circuit
- Pilot, Load Sensing
- Steering System – Pump
- Piston, Variable Displacement
- Maximum Flow @ 1,350 rpm
- 95gal/min
- Steering Cut Off Pressure
- 4500psi
- Steering Cycle Time (high idle)
- 4.4seconds
Hydraulic Cycle Time
- Raise
- 9.4seconds
- Dump
- 1.8seconds
- Total Hydraulic Cycle Time
- 19.3seconds
Hydraulic System – Lift/Tilt
- Maximum Flow at 1,850 rpm
- 254gal/min
- Lift Cylinder – Bore
- 11in
- Lift Cylinder – Stroke
- 45.2in
- Tilt Cylinder – Bore
- 10.5in
Sound Performance
- Operator Sound Pressure Level
- The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing Protection
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Machine Sound Power Level – Standard Machine Configuration
- The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Machine Sound Power Level – Sound Suppressed Machine Configuration
- The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan s
- Hearing Protection
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Machine Sound Power Level - Standard Machine Configuration
- The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Operator Sound Pressure Level
- The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Machine Sound Power Level - Sound Suppressed Machine Configuration
- The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan s
Brakes
- Brakes
- Meet ISO 3450:2011
- Brakes
- Meet ISO 3450:2011
Hydraulic Cycle Times
- Rack Back
- 4.4s
- Lower Float Down
- 3.7s
- Dump
- 1.8s
- Raise
- 9.4s
- Total Hydraulic Cycle Time
- 19.3s
Hydraulic System - Steering
- Steering Cycle Times - Low Idle
- 6.4s
- Steering Cycle Times - High Idle
- 4.4s
- Maximum Flow at 1,350 rpm
- 95gal/min
- Steering Cut Off Pressure
- 4500psi
- Steering System - Circuit
- Pilot, Load Sensing
- Steering System - Pump
- Piston, Variable Displacement
- Total Steering Angle
- 86°
Hydraulic System - Lift/Tilt
- Lift/Tilt System - Circuit
- Positive Flow Control
- Lift/Tilt System - Pump
- Variable Displacement Piston
- Relief Valve Setting - Lift/Tilt
- 4500psi
- Tilt Cylinder - Stroke
- 80.9in
- Lift Cylinder - Bore
- 11in
- Lift Cylinder - Stroke
- 45.2in
- Maximum Flow at 1,850 rpm
- 254gal/min
- Tilt Cylinder - Bore
- 10.5in
Dimensions - Standard Lift - Approximate
- Ground to Top of ROPS
- 18.63ft
- Ground to Top of Exhaust Stacks
- 17.22ft
- Ground to Top of Hood
- 13.26ft
- Ground to Bumper Clearance
- 3.86ft
- Rear Axle - Centerline to Bumper
- 13.76ft
- Wheel Base
- 19.32ft
- Maximum Overall Length
- 52ft
- Ground to Lower Hitch Clearance
- 2.24ft
- Ground to Center of Axles
- 4.44ft
- Rack Back Angle - Ground Level
- 43.4 degrees
- Rack Back Angle - Carry
- 52.7 degrees
- B-Pin Height - Maximum Lift
- 22.73ft
- Maximum Overall Height - Bucket Raised
- 30.5ft
- Dump Angle at Maximum Lift
- 50 degrees
- Reach - Maximum Lift
- 6.95ft
- Clearance at 50° Dump (Tooth Tip)
- 14.7ft
- Rack Back Angle - Maximum Lift
- 65 degrees
- Tread Width
- 10.83ft
Dimensions – Standard Lift (Approximate)
- Wheel Base
- 19.32ft
- Rack Back Angle at Ground Level
- 43.4 degrees
- Dump Angle at Maximum Lift
- 50 degrees
Dimensions - High Lift - Approximate
- Ground to Top of ROPS
- 18.63ft
- Ground to Top of Exhaust Stacks
- 17.22ft
- Ground to Top of Hood
- 13.26ft
- Ground to Bumper Clearance
- 3.86ft
- Rear Axle - Centerline to Bumper
- 13.76ft
- Wheel Base
- 19.32ft
- Maximum Overall Length
- 52.81ft
- Ground to Lower Hitch Clearance
- 2.24ft
- Ground to Center of Axles
- 4.44ft
- Rack Back Angle - Ground Level
- 42.8 degrees
- Rack Back Angle - Carry
- 52.5 degrees
- B-Pin Height - Maximum Lift
- 24.58ft
- Maximum Overall Height - Bucket Raised
- 33.08ft
- Dump Angle at Maximum Lift
- 50 degrees
- Reach - Maximum Lift
- 6.86ft
- Clearance at 45° Dump (Tooth Tip)
- 15.01ft
- Rack Back Angle - Maximum Lift
- 65 degrees
- Tread Width
- 10.83ft
Dimensions – High Lift (Approximate)
- Wheel Base
- 19.32ft
- Rack Back Angle at Ground Level
- 42.8 degrees
- Dump Angle at Maximum Lift
- 50 degrees
Service Refill Capacities
- Fuel Tank
- 413gal
- Cooling Systems
- 77gal (US)
- Engine Crankcase
- 32gal
- Transmission
- 45gal
- Differentials and Final Drives – Front
- 95gal
- Differentials and Final Drives – Rear
- 91gal
- Hydraulic System - Implement
- 86gal (US)
- Hydraulic System - Steering
- 42gal (US)
- AC Refrigerant
- 6lb
- AC Oil
- 0.071gal (US)
- Fuel Tank
- 413gal (US)
- Transmission
- 45gal (US)
- Differential - Final Drives - Front
- 95gal (US)
- Differential - Final Drives - Rear
- 91gal (US)
- Engine Crankcase
- 32gal (US)
Features
Structures
Power Train
Hydraulics
Operator Station
Technology Solutions
Cat® MineStar System
Safety
Serviceability
Customer Support
Sustainability
Buckets and Ground Engaging Tools
System Match Efficiency
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- Air-to-Air After Cooler (ATAAC)
- Axle oil coolers (front and rear)
- Brakes, full hydraulic, enclosed, wet multiple disc service brakes and dry parking/secondary brake
- Case drain filters
- Demand fan
- Driveline, electro-hydraulic parking brake
- Electric fuel priming pump
- Engine Cat C32 ACERT
- Ground level engine shutdown
- Ground level fast fill fuel
- Ground level transmission lockout
- Ground level starter lockout
- Precleaner, engine air intake
- Radiator, Aluminum Modular (AMR)
- Starting aid, ether, automatic
- Throttle lock
- Transmission, 533 mm (21 in) planetary powershift with 3F/3R with electronic control
-
- Electrical
-
- Alarm, back-up
- Alternator, 150-amp
- Batteries, low maintenance
- Converter, 10-amp, 24V to 12V
- Deutsch and amp seal terminal connectors
- Ground level electrical disconnect
- Ground level starting receptacle for emergency start
- Light, warning strobe
- Lights, front and rear, access stairway, turn signals/hazard lights
- Starter, electric (heavy duty)
- Starting and charging system, 24V, ECM diagnostic connector
-
- Operator Environment
-
- Air conditioner and heater with automatic temperature control
- Cab, sound suppressed, pressurized, rollover protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers, and a 12V converter (24-volt, 10-amp) for use with laptop/cell phone use
- Camera, rear vision
- Cigar lighter
- Coat hook
- Electro-hydraulic tilt and lift controls
- Horn, electric
- Implement and steering lockouts
- Light, dome (cab)
- Lunchbox and beverage holders
- Mirrors, rearview (externally mounted)
- Seat, Cat Comfort with air suspension
- Seat belt, 2-point, 76 mm (3 in), minder
- Steering and transmission lock lever
- STIC control system
- Tie-offs on ROPS
- Tinted glass
- Trainer seat with 76 mm (3 in) wide lap belt
- Transmission gear indicator
- VIMS (Vital Info Management System): – 3G with graphical information display – Cycle timer – External data port – Integral Cat Production Measurement (Cat PM)
- Wet-arm wipers/washer (front, rear, and corners), intermittent front wipers
-
- Safety And Security
-
- Fire suppression ready
-
- Other Standard Equipment
-
- Automatic lubrication system
- Bumper service center
- Couplings, Cat O-ring face seals
- Doors, service access (locking)
- Economy mode
- Emergency platform egress
- Fenders, steel (front and rear)
- Fuel, fast fill
- Grouped hydraulic pressure ports
- Guards, power train and crankcase
- Hitch, drawbar with pin
- Hoses, Cat XT™ and XT-ES
- Hydraulic oil cooler
- Impeller clutch
- Implement and steering ecology drains
- Mufflers, under hood
- Oil sampling valves
- Piston pump case drain filters
- Service center with ground level electrical and fluids service center
- Sight gauges: – Steering oil level – Implement oil level – Transmission oil level – Coolant level
- Stairway, left and right rear access
- Starter lockout, bumper
- Steering, load sensing
- Tie-offs on ROPS
- Toe kicks
- Transmission lockout, bumper
- Vandalism protection caplocks
- Venturi stacks (2)
Optional Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Operator Environment
-
- AM/FM/CD/MP3 radio
- AM/FM/CD/MP3 radio with Bluetooth and satellite ready
- Sun screen
-
- Starting Aids
-
- Engine coolant 120V heater
- Engine coolant 240V heater
-
- Machine Control And Guidance
-
- Cat Terrain ready
-
- Miscellaneous Attachments
-
- Arctic antifreeze for protection to –50° C (–58° F)
- Diagnostic lines
- Roading fenders
- Wheel chocks