CV117 Vibratory Drum Compactor

Drum Width
66.0 in
Drum Oscillation Tilt Range +/-
15.0 Degrees
Unit Weight
2063.0 lb
Drive Method
Gear Motor - Direct

Specs

Dimensions

Drum Width
66.0in
Drum Oscillation Tilt Range +/-
15.0Degrees
Unit Weight
2063.0lb
Drive Method
Gear Motor - Direct
Number of Motors
1
Motor Size
1.72in3
Hyd Flow Range
60-86 L/min (16-23 gpm)
Hyd Pressure
3340.0psi
Overall Width
73.0in
Height
25.0in
Length
40.0in
Drum Diameter
25.0in
Drum Frequency at Maximum Flow
2,946 vibrations/minute
Dynamic Force
11902.7lb
Amplitude
0.046in
Drum Width
66in
Weight
2063.5lb
Required Hydraulics
Standard Flow
Drive Method
Gear Motor - Direct
Drum Diameter
25in
Drum Oscillation Tilt Range
± 15 degrees
Height
25in
Length
39.7in
Optimal Hydraulic Pressure
145-235 bar (2100-3400 psi)
Required Hydraulic Flow
42-86 L/min (11-23 gpm)
Motor Size
1.7in³
Overall Width
73in
Optimal Hydraulic Flow
42-86 L/min (11-23 gpm)

Features

Application

Used for compacting soil, sand or gravel prior to pouring concrete or laying asphalt surfaces. Also ideal for asphalt patch work.

Used for compacting soil, sand or gravel prior to pouring concrete or laying asphalt surfaces. Also ideal for asphalt patch work.

Vibratory Pod Design

Caterpillar exclusive vibratory pod design delivers desired balance between frequency and amplitude to provide a superior matte finish.

Caterpillar exclusive vibratory pod design delivers desired balance between frequency and amplitude to provide a superior matte finish.

Higher Compaction Forces

High compaction forces result in fewer passes for greater productivity.

Replaceable Rubber Mounts

Replaceable rubber mounts isolate vibration and enhance vibratory capabilities.

High Strength Steel Drums

Durable high-strength steel drums are roll formed and finish welded for a smoother surface and longer life.

Durable high-strength steel drums are roll formed and finish welded for a smoother surface and longer life.

Pivoting Interface

Pivoting interface allows the drum to oscillate +/-15 degrees and follow the contour of the ground.

Pivoting interface allows the drum to oscillate +/-15 degrees and follow the contour of the ground.

Spring-Loaded Scraper Bar

Spring-loaded dual direction non-metallic scraper bar maintains constant pressure on drum to prevent material build up. Non-metallic design minimizes noise.

Spring-loaded dual direction non-metallic scraper bar maintains constant pressure on drum to prevent material build up. Non-metallic design minimizes noise.

Standard Equipment

Optional Equipment