Photos
Exterior View
|
|
|
|
|
Specs
Dimensions
- Working Width
- 62.0in
- Bucket Capacity - struck
- 10.8ft3
- Unit Weight
- 1312.0lb
- Overall Width
- 66.0in
- Drive Method
- Chain Reduction
- Hydraulic Flow Range
- 60-86 L/min (16-23 gpm)
- Hydraulic Pressure
- 3340.0psi
- Height
- 39.0in
- Length
- 64.0in
- Effective Displacement
- 19.2in3
- Fasteners
- Cat
- Hydraulic Hose
- Cat XT-3 ES
- Number of Teeth
- 372
- Bucket Capacity - Struck
- 0.4yd³
- Rock Size Range
- 19-152 mm (0.75-6 in)
- Raking Width
- 54.5in
- Drive Chain
- #80H
- Conveyor Chain
- #2060H
- Driven Shaft Speed
- 165 rpm @ 80 L/min (21 gpm)
- Working Width
- 62in
- Drive Method
- Chain Reduction
- Height
- 38.9in
- Length
- 63.8in
- Motor Displacement
- 19.2in³/rev
- Number of Hard Face Tines
- 372
- Optimal Hydraulic Pressure
- 145-235 bar (2100-3400 psi)
- Overall Width
- 66.3in
- Required Hydraulic Flow
- 42-86 L/min (11-23 gpm)
- Weight
- 1311.7lb
- Required Hydraulics
- Standard Flow
- Optimal Hydraulic Flow
- 42-86 L/min (11-23 gpm)
Features
Application
Uses the scarifying action of the hardened teeth to pulverize, aerate, level and condition the soil, while collecting and depositing rock and debris in the integrated hopper bucket for quick removal.
Uses the scarifying action of the hardened teeth to pulverize, aerate, level and condition the soil, while collecting and depositing rock and debris in the integrated hopper bucket for quick removal.
Travel Direction
Designed to operate with the loader traveling in reverse, leaving the soil finely groomed with minimal tire compaction.
Designed to operate with the loader traveling in reverse, leaving the soil finely groomed with minimal tire compaction.
Robust Design
Chain reduction drive system and steel teeth are built for maximum strength and durability in the toughest soil conditions.
Chain reduction drive system and steel teeth are built for maximum strength and durability in the toughest soil conditions.
Quick Dumping
Quick dumping capability is accomplished with a poppet check valve that stops flow to the hydraulic motor and directs flow to the rake head cylinder. Once the hopper bucket is full, simply reverse flow to actuate the rake head cylinder and dump the bucket.
Quick dumping capability is accomplished with a poppet check valve that stops flow to the hydraulic motor and directs flow to the rake head cylinder. Once the hopper bucket is full, simply reverse flow to actuate the rake head cylinder and dump the bucket.
Conveyor Tubes
Bolt-on conveyor tubes for easy replacement and serviceability.