|
|
|
|
Specs
Engine Specifications
- Bore
- 4.1in
- Displacement
- 427.8in³
- Stroke
- 5.3in
- Aspiration
- Turbocharged, Air to Air Aftercooled
- Fuel System
- Direct Injection
- Engine Model
- Cat® C7.1
- Compression Ratio
- 16.0:1, 18.2:1
- Governor Type
- Mechanical
- Aspiration
- Turbocharged, Air to Air Aftercooled
- Fuel System
- Direct Injection
- Bore
- 4.1in
- Displacement
- 427.8in³
- Stroke
- 5.3in
Generator Set Specifications
- Minimum Rating
- 135 kVA
- Maximum Rating
- 220 kVA
- Voltage
- 110 to 480 Volts
- Frequency
- 50 Hz
- Speed
- 1500 rpm
- Emissions/Fuel Strategy
- Non Regulated, EU Stage IIIA
- Duty Cycle
- Standby, Prime
- Standby Rating
- 220 kVA
- Prime Power Rating
- 135 kVA
Generator Set Dimensions
- Height - Maximum
- 64in
- Length - Maximum
- 98.4in
- Width - Maximum
- 52in
Features
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
M-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP 1.3 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
- Image may not be a representative of actual product
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
- Image may not be a representative of actual product
Cooling System
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
Fully prototype tested with certified torsional vibration analysis available
One Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
World Wide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Standard Equipment
-
- Air Inlet System
-
- Air cleaner; light duty with disposable element
-
- Control Panels
-
- EMCP 4.1
-
- Cooling System
-
- Radiator and cooling fan with guards
- Fan drive, battery charging alternator drive
- Coolant drain line with valves
- Caterpillar extended life coolant
-
- Fuel System
-
- Base, formed steel with single wall integral 8-hour fuel tank
- Standard open set fuel tank/base supplied
-
- Exhaust System
-
- Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose
-
- Generator And Generator Attachments
-
- Segregated low voltage (AC/DC) wiring panel
- Voltage regulator (single phase sensing)
- Tower panel, IP22, bottom cable entry
- 12 Leads
-
- Governing System
-
- Mechanical and electrical governing system - model dependent
-
- Lube System
-
- Oil drain line with valve
- Lubricating oil
-
- Generators And Generator Attachments
-
- IP23 Protection
- Circuit breaker, IEC, 3 pole, mounted in tower panel
-
- Mounting System
-
- Includes lifting provision and drag points
- Captive linear vibration isolators between base and engine-generator
- Captive linear vibration isolators between base and engine-generator
- Termination points for coolant and lube oil drain lines
-
- Starting / Charging System
-
- 24V battery with rack and cables
-
- General
-
- Engine and alternator pre-paint, Caterpillar yellow
Optional Equipment
-
- Alternator System
-
- 3 Phase sensing
- Optional LC Frame alternator
- Optional LC Frame alternator with coastal insulation protection
- R Frame auxiliary winding: R2273L4 SE aux alt 07, aux alt 08 and aux alt 10
- Permanent magnet excitation (PMG)
- Quatrature droop king
- Alternator removal
- Anti-condensation heater
-
- Circuit Breakers
-
- 4 Pole 250A, 400A and 630A Circuit breakers
- Padlockable breaker device
-
- Control System
-
- 1000001235
- Static battery charger
- Control panel heater
- Volt free contacts for common alarm
- Volt free contacts for generator set running
-
- Control Panel Options
-
- Overload shutdown via breaker
-
- Cooling System
-
- Low coolant level shutdown
- Coolant heater
- Low coolant temperature
-
- Enclosures
-
- Rental options (CAE only) - Single point lift
- Rental options (CAE only) - Rental pack
- Rental options (CAE only) - CEE form sockets for enclosure
- Sound attenuated level 2 enclosure
- Sound attenuated level 1 enclosure
- Rental options (CAE only) - Socket blanking plate
-
- European Certifications
-
- Upgrade to STD set for CE
-
- Fuel Systems
-
- Skidbase for CALG enclosure sets
- Open set narrow tankbase
- Low fuel level alarm
- DEFRA bunded fuel tank
- Low fuel level shutdown
- High fuel level alarm
- Compact skidbase for open sets
-
- Global Certifications
-
- Certification for CIS
-
- Mounting Options
-
- Electronic governor
- Industrial silencer removal
- Residential silencer
- Battery removal
- Silencer installation kit
-
- Test Reports
-
- PGS Test report @ 1.0 power factor
- PGS Test report @ 0.8 power factor
-
- General
-
- Stone guards/radiator trans flange
-
- Power Termination
-
- Circuit breaker, IEC, 4 pole
-
- Accessories / Miscellaneous
-
- Packing case - compact set
- Packing case - canopied set