Find your Louisiana Cat
(866) 843-7440
Contact Us
Exterior View
Interior View
Engine Model

Cat® C18 

Operating Weight

105271 lb

Net Power – SAE J1349:2011

496 hp

834 Wheel Dozer

ABOUT THE 834 WHEEL

Designed with performance in mind, the Cat® 834 Wheel Dozer delivers fast speeds for quick travel and cleanup on your jobsite. Improved efficiency and more productivity get the job done quickly and with less emissions. Simplified serviceability makes for a long lifecycle, low owning and operating costs, and more uptime.

The 834 WHEEL model is not yet in your cart.
            
Click on the add to cart button to build an equipment list.
Add the 834 WHEEL Model to the Cart
Request a Quote View rental options Apply for credit

TAKE THE 834 WHEEL FOR A SPIN

GET A PEEK INSIDE THE 834 WHEEL’S CABIN
GET A PEEK AT THE EXTERIOR OF THE 834 WHEEL

COMPARE THE 834 WHEEL TO OTHER Wheel-dozers

Engine Model
Cat® C18 
Net Power – SAE J1349:2011
496hp
Rated Speed
1900r/min
Peak Power Speed
1500r/min
Gross Power – SAE J1995:2014
562hp
Bore
5.7in
Stroke
7.2in
Displacement
1105in³
Peak Torque – 1,300 rpm
2092lb/ft
Torque Rise
52%
Note (1)
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Note (2)
The following engine configurations are available: – Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. – Noncertified that emits equivalent to U.S. EPA Tier 3.
Operating Weight
105271lb
Blade Capacities
7.9 – 22.2 m3 (10.3 – 29.0 yd3)
Transmission Type
Cat planetary power shift
Forward – 1
4.2mile/h
Forward – 2
7.2mile/h
Forward – 3
12.6mile/h
Forward – 4
22mile/h
Reverse – 1
4.2mile/h
Reverse – 2
7.6mile/h
Reverse – 3
13.3mile/h
Direct Drive – Forward 1
Lock-up disabled
Direct Drive – Forward 2
7.7mile/h
Direct Drive – Forward 3
13.7mile/h
Direct Drive – Forward 4
23.9mile/h
Direct Drive – Reverse 1
4.5mile/h
Direct Drive – Reverse 2
8.1mile/h
Direct Drive – Reverse 3
14.3mile/h
Note
Travel speeds based on 35/65-R33 tire
Lift/Tilt System – Circuit
Pilot operated LS valve with EH
Lift/Tilt System
Variable displacement piston
Maximum Flow at 1,900 rpm
153gpm
Relief Valve Setting – Lift/Tilt
4641psi
Cylinders, Double Acting – Lift, Bore and Stroke
139.75 mm × 1021 mm (5.5 in × 40.2 in)
Cylinders, Double Acting – Left and Right Tilt, Bore and Stroke
140 mm × 230 mm (5.5 in × 9.1 in)
Pilot System
Variable displacement piston
Pilot Maximum Flow
13.7gpm
Pilot Relief Valve Setting
580psi
Steering System – Circuit
Pilot, load sensing
Steering System – Pump
Piston, variable displacement
Maximum Flow
65.8gpm
Relief Valve Setting – Steering
3495psi
Total Steering Angle
86°
Steering Cycle Times – High Idle
3.1s
Steering Cycle Times – Low Idle
5.7s
Fuel Tank
209.5gal (US)
Cooling System
31.7gal (US)
Crankcase
15.9gal (US)
Diesel Exhaust Fluid Tank
8.7gal (US)
Transmission
31.7gal (US)
Hydraulic System Factory Fill
63.4gal (US)
Differential – Final Drives – Front
49.1gal (US)
Differential – Final Drives – Rear
49.1gal (US)
Hydraulic System – Tank Only
37gal (US)
Note (1)
All non-road Tier 4 Final/Stage V diesel engines are required to use: – ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. – If equipped with R134a (Global Warming Potential = 1430), the system co
Front
Fixed
Rear
Trunnion
Oscillation Angle
±13°
Brakes
ISO 3450: 2011
Operator Sound Pressure Level (ISO 6396:2008)
72dB(A)
Machine Sound Power Level (ISO 6395:2008)
113dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72dB(A)
Machine Sound Power Level (ISO 6395:2008)**
109dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level (ISO 6396:2008)
72dB(A)
Machine Sound Power Level (ISO 6395:2008)
113dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72dB(A)
Machine Sound Power Level (ISO 6395:2008)**
110dB(A)
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Height – Top of Exhaust Stack
15.9ft
Height – Top of Air Cleaner
12.8ft
Height – Top of Hood
10.9ft
Ground Clearance – Bumper
3.1ft
Centerline of Rear Axle to Edge of Bumper
10.5ft
Wheel Base
14.9ft
Length – Front of Tire
28.4ft
Length – Straight Blade on Ground
32.6ft
Length – Universal Blade on Ground
34.4ft
Centerline of Front Axle to Hitch
7.5ft
Ground Clearance
1.7ft
Height – Top of Cab
13.7ft
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Electrical
    • Alarm, back-up
    • Alternator, single (100 amp)
    • Batteries, dry
    • Hazardous voltage lamp
    • Converter, 10/15 amp, 24V to 12V
    • Lighting system, (LED work lights, access and service platform lighting)
    • Starting and charging system, 24V
    • Auxiliary jump start receptacle
  • Operator Environment
    • Air conditioner
    • Starter lockout in bumper
    • Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port
    • Cat Vision, rear-vision camera system
    • Graphical information display, displays real time operating information, performs calibrations and customizes operator settings
    • CB radio ready
    • Tilt, tip controls
    • Heater and defroster
    • Horn, electric
    • Light, cab (dome)
    • Lights, directional
    • Lunchbox and beverage holders
    • Vital Information Management System (VIMS™) with graphical information display: external data port, customizable operator profiles, cycle timer, integrated payload control system
    • Radio, AM/FM/CD/MP3 Bluetooth®
    • Instrumentation, gauges: – coolant temperature, engine hour meter, hydraulic oil temperature, powertrain oil temperature
    • Mirrors, rearview (externally mounted)
    • Rimpull control system (RCS)
    • Seat, deluxe
    • Seat belt, retractable, 76 mm (3 in) wide
    • Steering and transmission integrated control (STIC™) system
    • UV glass
    • Operator presence
    • Wet-arm wipers/washers (front and rear)
    • Intermittent front and rear wipers
  • Powertrain
    • Brakes, oil-cooled, multi-disc, service/secondary
    • Automatic retarding controls
    • Case drain screens
    • Engine, Cat C18 MEUI™, diesel, turbocharged/aftercooled
    • Antifreeze, premixed 50% concentration of extended life coolant with freeze protection to -34°C (-29°F)
    • Electro hydraulic parking brake
    • Turbine precleaner, engine air intake
    • Radiator, Aluminum Modular Radiator (AMR)
    • Manual switch and automatic fuel priming
    • Starting aid (ether) automatic
    • Throttle lock, electronic
    • Torque converter, impeller clutch (ICTC) with lock-up clutch (LUC) and rimpull control system (switch and dial in cab)
    • Transmission, planetary, power shift (4F/3R) electronic control
  • Additional Equipment
    • Doors, service access (locking)
    • Hitch, drawbar with pin
    • Oil sampling valves
    • Rear access to cab and service platform
    • Steering, load sensing
    • Vandalism protection caplocks
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Powertrain
    • -50° C (-58° F) antifreeze
    • Engine oil change system, high speed, Wiggins
    • Engine brake
    • High ambient cooling-software
    • Turbine precleaner, engine air intake dual stage
    • Axle oil cooler
    • Crankcase guards
  • Operator Environment
    • Cab precleaner
    • Radio, AM/FM/CD/MP3 Bluetooth with Satellite SiriusXM
    • Seat, Premium Plus containing forced air heating and cooling, 2-way thigh adjustment, power lumbar and back bolster adjustment, ride stiffness, dynamic end dampening and leather finish
    • LED warning strobe
    • Window pull down visor
    • Cat Detect (object detection system)
  • Additional Equipment
    • Front and rear roading fenders
    • Fast fill fuel system (Shaw-Aero)

Cat® Detect with Rear Camera

Cat® Detect with Smart Camera

Cat® Detect with Surround Cameras

Cat® Seat Belt Reminder

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN




STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

            
Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here