Exterior View
Continuous Rating

1972 ekW

Fuel Type

Low Energy, Biogas, Coal Gas

Maximum Electrical Efficiency

40.10%

G3520C Gas Generator

ABOUT THE G3520C

G3520C Gas Generator

The G3520C model is not yet in your cart.
Click on the add to cart button to build an equipment list.
Add the G3520C Model to the Cart

TAKE THE G3520C FOR A SPIN

GET A PEEK INSIDE THE G3520C’S CABIN
GET A PEEK AT THE EXTERIOR OF THE G3520C

COMPARE THE G3520C TO OTHER Gas-generator-sets

Continuous Rating
1972 ekW
Fuel Type
Low Energy, Biogas, Coal Gas
Maximum Electrical Efficiency
40.10%
Maximum Standby Rating
1972
Frequency
50 / 60 Hz
RPM
1200 / 1500 / 1800 rpm
Engine Model
G3520C
Displacement
5270in³
Aspiration
TA
Bore
6.7in
Stroke
7.5in
Fuel System
Low Energy, Biogas, Coal Gas
Compression Ratio
11.3
Length
249in
Width
79in
Height
92in
Dry Weight – Genset
37959lb
Weight
37953lb
  • Air Inlet
    • Two-element single-stage air cleaner with enclosure and service indicator
  • Control Panels
    • EMCP 4.3
  • Cooling
    • ANSI Class 6 in/DN customer flange connections for JW inlet and outlet
    • Engine driven water pumps for jacket water and aftercooler
    • 2nd Stage SCAC-Cat Flange
    • Jacket water and SCAC driven pumps
    • Jacket water and SCAC thermostat and outlet–ANSI 6 in/DN150
  • Exhaust
    • Dry exhaust manifolds, insulated and shielded
    • Cat-flanged face outlet on turbocharger
    • Individual exhaust port and turbocharger outlet wired to Integrated Tmeperature Sensing Module (ITSM) with GECM providing alarms and shutdowns
  • Fuel System
    • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
    • Electronic fuel metering valve, ANSI flange
    • Throttle plate, 24V DC actuator, controlled by GECM
    • 24V ETR Gas Shutoff Valve
  • Ignition System
    • Electronic Ignition System (controlled by GECM) 
    • Individual Cylinder Detonation Sensitive Timing (DST) 
  • Generator
    • 3-phase brushless, salient pole
    • Class F Insulation & temperature rise
    • Reactive droop 
    • Permanent Magnet Excitiation
    • Winding temperature detectors
    • Anti-condensation space heater
    • SR4B or SR5
    • Busbar connections
    • Caterpillar’s Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
    • SR4B
  • General
    • Crankshaft Vibration Damper and Guard
    • RH Service
    • Parts Book
    • Operation and maintenance manuals
    • Paint – Caterpillar Yellow except rails and radiators gloss black
  • Air Inlet
    • Enclosure Mounting Brackets and Piping
    • Mounting stand
    • Air cleaner with precleaner
  • Contol Panel
    • Custom 8-Light Alarm Module
    • Local NFPA99-110 Alarm Module w/LEDs
    • Remote 24-32V 8/16 Annunciator
    • Synchronizing Module
    • PL1000E/PL1000T Communications Module
    • Engine Failure Relay
  • Control Panels
    • Local alarm module
  • Cooling
    • Inlet/Outlet connections
    • Engine pumps
    • Aftercooler air lines, aftercooler core replacement
    • Jacket water coolant heater
  • Exhaust
    • Mufflers (15/18/25 dBA Attenuation) and spark-arresting muffler with ANSI companion flanges
    • Exhaust expanders
    • Flexible fittings
    • 305/360/406 mm Elbow Kits
  • Fuel System
    • 14-69 kPa (2-10 psi) gas pressure regulator
    • Fuel filter
    • 24V DC Gas shutoff valve
    • 207-276kPa, 30-40 psi gas knockdown regulator
  • Generator
    • Generator Removal
    • Annunciator Modules
    • Medium and high voltage generators and attachment
    • 60 Hz–480/4160 Volt Generator Options
    • Cable access box
    • Generator air filter
    • European Bus Bars
    • Low voltage extension box
    • Bearing temperature detectors
    • 8.7/15 kV Class  Current Transformers (CCCT, DCT, CT)
    • 50 Hz–3300/6600 Volt Generator Options
  • Governing System
    • Load share module
  • Starting/charging
    • Jacket water heater
    • Battery diconnect switch
    • 24V starting motors
    • Battery with cables and rack (shipped loose)
    • 60A, 24V charging alternator (requires engine driven pumps)

Coming Soon





STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here