Find your Louisiana Cat
(866) 843-7440
Contact Us
Exterior View
Exterior View
Exterior View
Interior View
Interior View
Engine Power – ISO 14396:2002

786 hp

Operating Weight – Standard

178517 lb

Bucket Capacity Range

8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)

990 Wheel Loader

ABOUT THE 990 WHEEL

The Cat® 990 Wheel Loader helps you move more material in less time, at a low cost per ton, for a fast return on your investment. This machine offers significant fuel savings, low maintenance costs, and great productivity and durability to acheive multiple life cycles.

The 990 WHEEL model is not yet in your cart.
            
Click on the add to cart button to build an equipment list.
Add the 990 WHEEL Model to the Cart
Request a Quote View rental options Apply for credit

TAKE THE 990 WHEEL FOR A SPIN

GET A PEEK INSIDE THE 990 WHEEL’S CABIN
GET A PEEK AT THE EXTERIOR OF THE 990 WHEEL

COMPARE THE 990 WHEEL TO OTHER Wheel-loaders

Engine Power – ISO 14396:2002
786hp
Engine Model
Cat® C27
Emissions
Option 1 – U.S. EPA Tier 4 Final/EU Stage V
Rated Speed
1800r/min
Gross Power – SAE J1995:2014
801hp
Net Power – SAE J1349:2011 – Standard Ambient
732hp
Net Power – SAE J1349:2011 – High Ambient
681hp
Emissions
Option 2 – Emits equivalent to U.S. EPA Tier 2
Rated Speed
1800 r/min
Engine Power – ISO 14396:2002
752hp
Gross Power – SAE J1995:2014
766hp
Net Power – SAE J1349:2011 – Standard Ambient
699hp
Net Power – SAE J1349:2011 – High Ambient
648hp
Bore
5.4in
Stroke
6in
Displacement
1649.5in³
Peak Torque – 1,200 rpm
2624lb/ft
Torque Rise
18%
Note
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.
Operating Weight – Standard
178517lb
Bucket Capacity Range
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
Rated Payload – Standard
17.5ton (US)
Rated Payload – High Lift
17.5ton (US)
Cat Truck Match – Standard
773-775
Cat Truck Match – High Lift
775-777
Transmission Type
Cat planetary power shift
Forward – 1
4.6mile/h
Forward – 2
8.2mile/h
Forward – 3
14.5mile/h
Reverse – 1
5.1mile/h
Reverse – 2
9.1mile/h
Reverse – 3
16mile/h
Direct Drive – Forward 1
Lock-up disabled
Direct Drive – Forward 2
8.2mile/h
Direct Drive – Forward 3
14.5mile/h
Direct Drive – Reverse 1
5.1mile/h
Direct Drive – Reverse 2
9.1mile/h
Direct Drive – Reverse 3
16mile/h
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Lift/Tilt System – Circuit
Positive flow control
Lift/Tilt System
Variable displacement piston
Maximum Flow at 1,800 rpm
240gpm
Relief Valve Setting – Lift/Tilt
4786psi
Cylinders, Double Acting – Lift, Bore and Stroke
235 mm × 1287 mm (9.3 in × 50.7 in)
Cylinders, Double Acting – Tilt, Bore and Stroke
292.1 mm × 820 mm (11.5 in × 32.3 in)
Pilot System
Open loop and pressure reducing
Pilot Relief Setting
507psi
Rack Back
4.3s
Raise
8.6s
Dump
2.9s
Lower
3.7s
Lower Float Down
3.7s
Total Hydraulic Cycle Time – Empty Bucket
13.8s
Steering System – Circuit
Pilot, load sensing
Steering System – Pump
Piston, variable displacement
Maximum Flow at 1,400 rpm
96.2gpm
Relief Valve Setting – Steering
5004psi
Total Steering Angle
70°
Air Conditioning
• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c
Front
Fixed
Rear
Trunnion
Oscillation Angle
8.5°
Brakes
ISO 3450: 2011
Fuel Tank
281gal (US)
Cooling System
54.9gal (US)
Engine Crankcase
20gal (US)
Transmission
29.1gal (US)
Differential – Final Drives – Front
71.6gal (US)
Differential – Final Drives – Rear
68.9gal (US)
Hydraulic System Factory Fill
210gal (US)
Hydraulic Tank – Implement and Hydraulic Fan
68.9gal (US)
Hydraulic Tank – Steering and Braking
34.9gal (US)
Note
Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este
Operator Sound Pressure Level (ISO 6396:2008)
72dB(A)
Machine Sound Power Level (ISO 6395:2008)
116dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72dB(A)
Machine Sound Power Level (ISO 6395:2008)*
114dB(A)
Note (1)
*Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level (ISO 6396:2008)
72dB(A)
Machine Sound Power Level (ISO 6395:2008)
116dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72dB(A)
Machine Sound Power Level (ISO 6395:2008)*
114dB(A)
Note (1)
*Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Ground to Top of ROPS
17.2ft
Ground to Top of Exhaust Stacks
16.6ft
Ground to Top of Hood
12.7ft
Ground to Bumper Clearance
3.5ft
Rear Axle – Centerline to Bumper
12.5ft
Front Axle Centerline to Bucket Tip
15.4ft
Wheel Base
15.1ft
Maximum Overall Length
42.9ft
Ground to Lower Hitch Clearance
2ft
Ground to Center of Front Axle
4.2ft
Clearance at Maximum Lift
7.2ft
Rack Back Angle at Ground Level
40.4°
Rack Back Angle at Carry
48.8°
B-Pin Height – Maximum Lift
19.7ft
Maximum Overall Height – Bucket Raised
27.2ft
Rack Angle at Maximum Lift
63.7°
Dump Angle at Maximum Lift
45°
Reach – Maximum Lift
7.2ft
Note
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
Ground to Top of ROPS
17.2ft
Ground to Top of Exhaust Stacks
16.6ft
Ground to Top of Hood
12.7ft
Ground to Bumper Clearance
3.5ft
Rear Axle – Centerline to Bumper
12.5ft
Front Axle Centerline to Bucket Tip
17.8ft
Wheel Base
15.1ft
Maximum Overall Length
45.3ft
Ground to Lower Hitch Clearance
2ft
Ground to Center of Front Axle
4.2ft
Clearance at Maximum Lift
14.8ft
Rack Back Angle at Ground Level
39.9°
Rack Back Angle at Carry
49.3°
B-Pin Height – Maximum Lift
21.2ft
Maximum Overall Height – Bucket Raised
28.7ft
Rack Angle at Maximum Lift
60.6°
Dump Angle at Maximum Lift
51°
Reach – Maximum Lift
8.5ft
Note
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Air conditioner and heater with automatic temperature control
    • Cab, sound-suppressed and pressurized, rollover protective structure/falling objects protective structure (ROPS/FOPS)
    • Cat Vision, rear vision camera system
    • 12-volt power port
    • Coat hook
    • Cab precleaner, powered
    • Electro-hydraulic tilt and lift controls (seat mounted)
    • Flip-up armrest
    • Heater and defroster
    • CB radio ready
    • Horn, electric
    • Implement hydraulic lockout
    • Instrumentation, gauges:
      – Engine coolant temperature
      – Fuel level
      – Ground speed
      – Gear
      – Hydraulic oil temperature
      – Speedometer/tachometer
      – Torque converter temperature
    • Instrumentation, warning indicators:
      – Action alert system, three category
      – Automatic transmission model enable status
      – Brake malfunction
      – Bucket float status
      – Delayed engine shutdown status
      – Engine idle shutdown status
      – Engine malfunction
      – Fuel economy mode enable status
      – Hydraulic lockout
      – Lockup clutch enable status
      – Low fuel level
      – Parking brake status
      – Rimpull control enable status
      – Seatbelt warning
      – Secondary steering (if equipped)
      – Throttle lock status
      – Transmission gear
    • Keypad, control with indicator lights:
      – Auto trans mode speed range
      – Auto/manual transmission mode
      – Fuel economy mode
      – Implement kickout
      – Lockup clutch
      – Reduced rimpull
      – Throttle lock
    • Light, dome (cab)
    • Lunchbox and beverage holders
    • Mirrors, rearview (externally mounted)
    • Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable-length seat cushion
    • Seat belt, retractable, 76 mm (3 in) wide
    • Steering and Transmission Integrated Control (STIC™) system with steering lock
    • Tinted glass
    • Trainer seat with lap belt
    • Vital Information Management System (VIMS™) with graphical information display: external data port, customizable operator profiles, cycle timer, and integral Cat Production Measurement
      – Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
  • Powertrain
    • Brakes, full hydraulic, enclosed, oil-disc
    • Axle-shaft oil-disc service brake
    • Electro hydraulic parking brake
    • Case drain screens
    • Cat clean emission module (CEM) – (Tier 4 only)
    • Demand fan
    • Engine Cat C27
    • Fuel priming pump (electric)
    • Ground level shutdown switch
    • Mufflers (under hood) (Tier 2 equivalent only)
    • Precleaner, engine air intake
    • Radiator, Aluminum Modular (AMR)
    • Separated cooling system
    • Starting aid, (ether) manual override
    • Throttle Lock
    • Torque Converter, Impeller Clutch (ICTC) with lock-up clutch (LUC), and rimpull control system
    • Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
  • Electrical
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance free (2 – 1,400 CCA)
    • Converter, 10/15 amp, 24V to 12V
    • Deutsch component connectors
    • Electrical system, 24V
    • Electronic transmission control
    • Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
    • Starter, electric
    • Auxiliary start receptacle
  • Other
    • Automatic bucket lift kickout/positioner
    • Axle temperature sensor
    • Battery disconnect and jump start receptacle, bumper
    • Coupling, Caterpillar O-ring face seals
    • Economy mode with on demand throttle
    • Emergency platform exit
    • Engine, crankcase, 500 hour interval with CH4
    • Engine idle management features:
      – Auto idle kickdown
      – Delayed engine shutdown
      – Engine idle shutdown
    • Fenders, steel (front)
    • Guards, crankcase and powertrain
    • Ground level lockable battery disconnect switch
    • Grouped/labeled lube points
    • Hitch, drawbar with pin
    • Hoses, Cat XT™
    • Oil sampling valves
    • Positive flow control hydraulic system
    • Product Link™
    • Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
    • Stairway, left and right rear access
    • Steering, load sensing
    • Toe kicks
    • Vandalism protection caplocks
    • Venturi stack
    • Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Powertrain
    • –50° C (–58° F) antifreeze
    • Engine oil change system, high speed, Wiggins
    • Engine block heater 120V or 240V
    • High ambient cooling – software
  • Operator Environment
    • Cat Detect, object detection system
    • AM/FM/CD/MP3 radio
    • Satellite Sirius radio with Bluetooth®
    • LED warning strobe
    • Mirrors heated
    • Window pull-down visor
  • Other
    • Front and rear roading fenders
    • Fast fill fuel system (Shaw-Aero)
  • Other Optional Configurations
    • Millyard
    • Steel Mill

Cat® Detect with Rear Camera

Cat® Seat Belt Reminder

Cat® Detect with Smart Camera

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN




STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

            
Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here