|
|
|
|
Specs
Power Rating
- Power Range
- 365-400 bhp (272-298 bkW)
- Power Range
- 365-400 bhp (272-298 bkW)
Engine Specifications
- Speed Range
- 1800 rpm
- Emissions
- Non-Certified
- Aspiration
- TA
- Bore
- 5.4in
- Stroke
- 6.5in
- Displacement
- 891in3
- Configuration
- In-line 6, 4-Stroke-Cycle Diesel
- Rotation from Flywheel End
- Clockwise
- Speed Range
- 1800 rpm
- Emissions
- Non-Certified
- Aspiration
- TA
- Bore
- 5.4in
- Stroke
- 6.4in
- Displacement
- 893.39in³
- Refill Capacity
- 34.0 L (9.0 gal)
- Governor
- Mechanical
- Oil Change Interval
- 250 hrs
- Cooling
- Heat exchanger or keel-cooled
Dimensions & Weights
- Length
- 57.25in
- Width
- 35.96in
- Height
- 50.33in
- Dry Weight - Approximate
- 2921lb
Features
Key Features & Benefits
- Corrosion resistant aftercooler core and regular duty panel type air cleaner at turbocharger inlet
- Gear-driven centrifugal jacket water pump with expansion tank
- Water-cooled exhaust manifold and turbocharger with round flanged outlet
- Fuel priming pump, transfer pump, and LH serviced filter, flexible lines, and fuel ratio control
- Heavy duty SAE standard rotation tachometer
- LH instrument panel with engine oil pressure, water temperature, and fuel pressure gauges, service meter
- Crankcase breather with right hand Service - oil filter, oil level gauge, and oil filler
- Front & rear supports
- Vibration damper and guard
- Corrosion resistant aftercooler core and regular duty panel type air cleaner at turbocharger inlet
- Gear-driven centrifugal jacket water pump with expansion tank
- Water-cooled exhaust manifold and turbocharger with round flanged outlet
- Fuel priming pump, transfer pump, and LH serviced filter, flexible lines, and fuel ratio control
- Heavy duty SAE standard rotation tachometer
- LH instrument panel with engine oil pressure, water temperature, and fuel pressure gauges, service meter
- Crankcase breather with right hand Service - oil filter, oil level gauge, and oil filler
- Front & rear supports
- Vibration damper and guard
Standard Equipment
-
- Standard Equipment
-
- SAE 1 flywheel housing
- Water cooled manifold
- Turbo and Aftercooler
- Keel cooling with jacket water pump
- Expansion tank & connections
- Exhaust flange
- Air cleaner
- Front & rear supports
- Charging alternator (12/24V selection)
- Starting motor (12/24V selection)
Optional Equipment
-
- Optional Attachments
-
- Sea water pump
- Heat exchanger