Specs
Engine Specifications
- Bore
-
11in
- Displacement
-
1127in3
- Stroke
-
11.8in
- Aspiration
-
TA
- Fuel System
-
Direct unit injection
- Engine Model
-
3608 I-8,4-Stroke Water-Cooled Diesel
- Total Displacement
-
9064in³
- Compression Ratio
-
13:01
- Governor Type
-
Generator Set Monitoring System (GMS)
- Aspiration
-
TA
- Fuel System
-
Direct unit injection
- Bore
-
11in
- Displacement
-
9064in³
- Stroke
-
11.8in
Generator Set Specifications
- Minimum Rating
-
1830 ekW
- Maximum Rating
-
2660 ekW
- Frequency
-
60 Hz
- Speed
-
720 & 900 rpm
- Emissions/Fuel Strategy
-
Low Fuel Consumption
- Duty Cycle
-
Standby, Prime, Continuous
Generator Set Dimensions
- Length - Maximum
-
404in
- Width - Maximum
-
99.62in
- Height - Maximum
-
156.6in
- Dry Weight - Genset (maximum)
-
91050lb
Features
Cat Diesel Engine
Generator
World Wide Product Support
Full Range of Attachments
Standard Equipment
-
- Air Inlet System
-
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Air inlet shutoff
- Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
- Breather, crankcase, top-mounted
-
- Cooling System
-
- Engine coolant water drains
- Water temperature regulator
- Jacket water thermostats
-
- Exhaust System
-
- Includes adapter, flexible exhaust fitting
- 457 mm (18 in) Cat bolt pattern
- Dry, gas tight, exhaust manifold
-
- Fuel System
-
-
- Generator System
-
- Custom generator per generator data sheet completed by dealer
-
- Governor System
-
-
- Lube System
-
- Oil filler and dipstick
- Service side engine mounted on cylinder block inspection covers
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Centrifugal oil filters with single shutoff
- Oil pressure regulating valve
- Crankcase explosion relief valves
-
- Mounting System
-
- Engine and generator mounting
- Damper, torsional vibration
-
- Starting / Charging System
-
- Air silencer
- One motor, engine mounted at rear, on left side
- Vane type air starter
- Line group for single point custom connection
-
- General:
-
- Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
- Paint, Caterpillar yellow
Optional Equipment
-
- Air Inlet System
-
- Heavy duty air cleaner
- Air inlet adapter
- Boost control valve
- Air cleaner louver assembly
- Vertical support bracket
- Soot filter
-
- Cooling System
-
- Auxiliary water pump
- Heating aids
- Cooling system aids
- Expansion tank
-
- Exhaust System
-
- Weld flange and related hardware
- Flexible exhaust fittings
-
- Fuel System
-
- Fuel priming pump
- Duplex primary fuel strainer
- Fuel system connections
-
- Generator System
-
- Class F insulation
- Anti-condensation space heaters
- 3 Phase, six Leads, WYE
- Winding temperature detectors
- Busbar connections
-
- Governor System
-
- Battery backup/power supply
- 2301 A load share
- Electronic/actuators
- Digital programmers
- EGB actuator
- 723 Plus
-
- Lube System
-
- Lube ANSI adapter (Emergency connection)
- Oil pan drain valve
-
- Mounting System
-
- Spring type vibration isolators
- Non-vertically restrained
- Vertically restrained
- Isolator
-
- Starting / Charging System
-
- Pressure reducing valve
- Compressed air flex hose
-
- General:
-
