Find your Louisiana Cat
(866) 843-7440
Contact Us
Exterior View

C18 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Request a Quote View rental options Apply for credit
Maximum Rating
715 kVA
Minimum Rating
550 kVA
Emissions/Fuel Strategy
Low Fuel, China Nonroad III Emis Stds
Voltage
380 to 415 Volts
Frequency
50 Hz
Speed
1500 rpm
Duty Cycle
Standby, Prime
Engine Model
C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Bore
5.71in
Stroke
7.2in
Displacement
1106.36in³
Compression Ratio
14.5:1
Aspiration
Air to Air Aftercooled
Fuel System
Electronic unit injection
Governor Type
Ademâ„¢A4
Length – Maximum
162.4in
Width – Maximum
78.3in
Height – Maximum
75in
  • Air Inlet System
    • Turbocharger
    • Light duty air cleaner
    • Aftercooler core
  • Air Inlet
    • Air cleaner
  • Control System
    • GCCP 1.2
  • Exhaust
    • Exhaust flange outlet
  • Cooling
    • Coolant drain line with valve
    • Caterpillar extended life coolant
    • Fan drive, battery charging alternator drive
    • Radiator and cooling fan with guard
  • Exhaust System
    • Stainless steel exhaust flex gaskets, raincap and SAE exhaust flange for customer use – shipped loose
  • Fuel
    • Secondary fuel filters
    • Fuel priming pump
    • Primary fuel filter with integral water separator
  • Fuel System
    • Standard 8 hour open set fuel tank
  • Generator
    • IP23 Protection
    • Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
    • Matched to the performance and output characteristics of Cat engines
  • Generator And Attachments
    • Segregated low voltage (AC/DC) wiring panel
    • Integrated voltage regulator (IVR)
    • A Frame generator – IP21 protection
    • Integrated voltage regulator (IVR)
    • Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
    • Power center, IP22
    • Matched to the performance and output characteristics of Cat engines
  • Power Termination
    • Busbar
  • Governing System
    • Cat electronic governor (ADEM A4)
  • Control Panel
    • GCCP Genset Controller
  • Lube System
    • Lubricating oil
    • Oil drain valves
  • Mounting
    • Rubber vibration isolators
  • Mounting System
    • Captive linear vibration isolators between base and engine-generator. includes lifting provisions and termination points for coolant and lube oil drain lines
  • Starting/charging
    • 24 Volt battery with rack and cables
  • General
    • Engine and alternator pre-paint, Caterpillar yellow
  • Exhaust
    • Industrial, residential, critical mufflers
  • Air Inlet System
    • Dual element air cleaner
    • Single element air cleaner
  • Circuit Breakers
    • 3 Pole (IEC-100% rated) Circuit breakers – Motorised
    • 4 Pole (IEC-100% rated) Circuit breakers – Motorised
    • Circuit breaker (IEC) Auxiliary contacts
    • Padlockable circuit breaker device
    • 3 Pole (IEC-100% rated) Circuit breakers – Package mounted
    • 4 Pole (IEC-100% rated) Circuit breakers – Package mounted
    • Power terminal strip
    • Shunt trip for IEC breaker
  • Generator
    • Anti-condensation heater
    • Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
    • Oversize and premium generators
  • Power Termination
    • Circuit breakers, IEC compliant
    • Circuit breakers, UL listed
  • Control Panels
    • Local & remote annunciator modules
    • Load share module
    • Remote monitoring software
    • EMCP (4.2) (4.3) (4.4)
    • Digital I/O module
  • Control System
    • Oil temperature displays
    • GCCP 1.5
    • Volt free contact
    • Protective devices: Earth fault relay – earth leageage Ground fault relay – Overload shutdown via breaker – Low fuel level alarm – Low fuel level shutdown – High fuel level alarm – Fuel level sensor
    • Local alarm modules
    • Remote annunciator module
    • Local alarm horn
  • Cooling System
    • Low coolant temperature alarm
    • Radiator duct flange
  • Starting/charging
    • Oversize batteries
    • Jacket water heater
    • Battery chargers
    • Heavy duty starting system
    • Charging alternator
  • Enclosures
    • Sound attenuated enclosures
  • Exhaust System
    • Manifold and turbocharger guards
    • Engine mounted muffler
    • 8 and 10 inch elbow kits
    • 8 and 10 inch GP flanges
    • 10, 25 and 35 end in / end outmufflers
  • Fuel System
    • Integral – Dual wall fuel tank base
    • Manual fuel transfer pump
    • Fuel transfer system
  • Generator And Attachments
    • LC frame generator
    • Permanent magnet excitation (PMG)
    • LC frame oversize generators
    • Space heaters
    • A Frame oversize generator
    • A Frame CIP generator
    • Ingress protection
    • LC frame CIP generator
  • General
    • Single or dual wall integral fuel tanks
    • UL 2200 package
    • Enclosures: Sound attenuated, weather protective
    • EU Certificate of Conformance (CE)
    • Integral & sub-base UL listed dual wall fuel tanks
    • Narrow, wide or skid base
    • The following options are based on regional and product configuration:
    • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
    • EEC Declaration of Conformity
    • CSA Certification
    • Sound attenuated, weather protective or high ambient weather protective enclosure
    • Automatic transfer switches (ATS)
    • Single or dual wall sub-base fuel tanks
  • Lube System
    • Manual sump pump
  • Starting And Charging
    • Jacket water heaters
    • 5 Amp Battery charger
    • Battery disconnect switch

C18 Integral Fuel Tank Base

C18 High Ambient Acoustic Enclosure

C13, C15, C18 SA enclosure. 350-600 kW 60 Hz

C18 Sound Attenuated Enclosure 50 and 60 Hz

C13, C15, C18 WP Enclosure. 350-600 kW 60 Hz

EMCP 4.3 Control Panel