Photos
|
|
|
|
|
Specs
Generator Set Specifications
- Voltage
- 120/208, 120/240, 277/480, 346/600 VAC
- Frequency
- 60 Hz
- Natural Gas Rating
- 450 ekW
- RPM
- 1800
- Emissions/Fuel Strategy
- U.S. EPA Certified for Non-Emergency Application
- Fuel Type
- Natural Gas
- Displacement
- 1336.42in³
- Speed
- 1800 rpm
- Natural Gas Rating
- 450 ekW
Engine Specifications
- Engine Model
- G21.9L V12, 4-Cycle, Spark -Ignited
- Fuel System
- Carburetor, Down Draft
- Governor Type
- Electronic
- Aspiration
- Turbocharged - Aftercooled
- Bore
- 5.03in
- Stroke
- 5.6in
- Compression Ratio
- 10.0:1
Generator Sets Specifications
- Compression Ratio
Generator Set Dimensions
- Length
- 154.4in
- Width
- 71in
- Height
- 67in
- Weight
- 8274lb
Features
Engine
- Four-stroke-cycle gas engine combines consistent performance and excellent fuel economy with minimum weight
- Four-stroke-cycle gas engine combines consistent performance and excellent fuel economy with minimum weight
Generator
- Matched to the performance and output characteristics of Cat engines
- Industry leading mechanical and electrical design
- Industry leading motor starting capabilities
- High Efficiency
- Matched to the performance and output characteristics of Cat engines
- Industry leading mechanical and electrical design
- Industry leading motor starting capabilities
- High Efficiency
EMCP Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Design Criteria
- The generator set facilitates compliance with NFPA 110 and meets ISO 8528-5 requirements for transient response
- Cooling system designed to operate in 50˚C/122˚F ambient temperatures with an air flow restriction of 0.5 in. water
- The generator set facilitates compliance with NFPA 110 and meets ISO 8528-5 requirements for transient response
- Cooling system designed to operate in 50˚C/122˚F ambient temperatures with an air flow restriction of 0.5 in. water
UL 2200 / CSA - Optional
- UL 2200 Listed packages
- CSA Certified
- Certain restrictions may apply
- Consult with your Cat® Dealer
- UL 2200 Listed packages
- CSA Certified
- Certain restrictions may apply
- Consult with your Cat® Dealer
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Standard Equipment
-
- Cooling
-
- Closed coolant recovery system
- 50/50 Ethylene glycol antifreeze
- Factory-installed radiator
-
- Fuel
-
- Fuel pressure test po
- Low fuel pressure switch
- Primary and secondary fuel shut-off
-
- Generator
-
- Class H insulation material
- Permanent magnet excitation
- Full load capacity alternator
-
- Controls
-
- EMCP 4.2 Series generator set controller
-
- Mounting
-
- Vibration isolaton (puck type)
-
- Electric Starting And/or Prelube
-
- Engine electrical system
- Battery cables
- Solenoid activated starter motor
-
- Electric Power - Package Serial Number Prefix
-
- Battery charging alternator
Optional Equipment
-
- Generator
-
- Thermal magnetic or electronic trip MCCBs
- Anti-condensation heater
- Shunt trip and auxiliary contact breaker