Power Grid Stabilization (PGS) Heavy Duty (HD)

Photos

The Cat® PGS Module is a scalable, rapidly deployable energy storage system with a heavy-duty battery structure. The PGS integrates with solar and other renewable sources to provide short duration power when the renewable source is not available or virtual spinning reserve to optimize generator sets efficiency. This system provides transient assist and grid stabilization to the installation.

Maximum Continuous at 1.0 PF
1000 kW
Application
Transient Assist
Module Type
Heavy Duty mobile Grid Stabilization
Rated Power
1000-1260 kW

Specs

System Output Power

Maximum Continuous at 1.0 PF
1000kW
15 min Overload at 1.0 PF
1170kW
10 min Overload at 1.0 PF
1225kW
5 min Overload at 1.0 PF
1260kW
1 min Overload at 1.0 PF
1260kW

Technical Summary

Application
Transient Assist
Module Type
Heavy Duty mobile Grid Stabilization
Rated Power
1000-1260 kW

Output Voltage THD

Output Voltage
<3%

Energy (Nameplate Start of Life)

Energy Type
Li-Ion - Energy
Battery Chemistry
NMC
Energy (Nameplate Start of Life)
672kW·h

Inverter Model

Inverter Model
BDP1000
Number of Inverters
1

Average Parasitic Load

Shore Power Connection
480 V (60 Hz)

Dimensions

Container with Trailer - Length
37.93ft
Container with Trailer - Width
8.73ft
Container with Trailer - Height
12.99ft
Container without Trailer - Length
22.13ft
Container without Trailer - Width
8ft
Container without Trailer - Height
9.5ft

Features

General

  • Transient Ride Through & Stabilization
  • Seamless mode transfer
  • Islanding detection
  • Static VAR compensator
  • Reserve Power Capacity
  • Plug-and-Play parallel ready
  • Energy Storage Management
  • Human-Machine Interface (HMI)
  • Fire Suppression System
  • Modbus TCP/IP Communications Protocols
  • Ambient Temperature Capability -40°C to +50°C
  • Transient Ride Through & Stabilization
  • Seamless mode transfer
  • Islanding detection
  • Static VAR compensator
  • Reserve Power Capacity
  • Plug-and-Play parallel ready
  • Energy Storage Management
  • Human-Machine Interface (HMI)
  • Fire Suppression System
  • Modbus TCP/IP Communications Protocols
  • Ambient Temperature Capability -40°C to +50°C

Reliable, Scalable, and Mobile

The Cat PGS module is a robust, mobile energy storage platform. The module consists of a pre-engineered container that is easily installed on site. Multiple modules may operate in parallel with other power sources to provide increased power output and/or increase the energy capacity.

The Cat PGS module is a robust, mobile energy storage platform. The module consists of a pre-engineered container that is easily installed on site. Multiple modules may operate in parallel with other power sources to provide increased power output and/or increase the energy capacity.

Renewable Integration

The modules are designed to work with an array of renewable systems, including solar and wind. Seamless integration with the Cat Microgrid Master Controller (MMC) allows for maximum renewable penetration and full asset control.

The modules are designed to work with an array of renewable systems, including solar and wind. Seamless integration with the Cat Microgrid Master Controller (MMC) allows for maximum renewable penetration and full asset control.

Grid Stabilization

The Cat PGS protects against many typical power problems, including power failure, voltage sags/surges, and under/over frequency conditions.

The Cat PGS protects against many typical power problems, including power failure, voltage sags/surges, and under/over frequency conditions.

Cat® Bi-Directional Power (BDP) Inverters

The Cat BDP inverters are the core to the energy storage system. Based on technology developed for Cat electric drive machines, the Cat BDP provides exceptional reliability, durability, and features that include:

  • Intelligent controls for the charging and discharging of the energy storage equipment.
  • 2 per unit fault current capability
  • Static VAR compensator
  • Four-quadrant output power factory control
  • Patented Non-Linear droop control for ultra fast response
  • Seamless mode transfer
  • Automatic anti-islanding
  • Grid forming
  • Grid following
  • Autonomous mode or Remote-Control mode
  • Parallel ready - multiple modules may be used in parallel to increase total output to 100+MW

The Cat BDP inverters are the core to the energy storage system. Based on technology developed for Cat electric drive machines, the Cat BDP provides exceptional reliability, durability, and features that include:

  • Intelligent controls for the charging and discharging of the energy storage equipment.
  • 2 per unit fault current capability
  • Static VAR compensator
  • Four-quadrant output power factory control
  • Patented Non-Linear droop control for ultra fast response
  • Seamless mode transfer
  • Automatic anti-islanding
  • Grid forming
  • Grid following
  • Autonomous mode or Remote-Control mode
  • Parallel ready - multiple modules may be used in parallel to increase total output to 100+MW

Energy Storage

  • Advanced lithium-ion batteries provide good energy density, high discharge/recharge efficiency, and high cycle life.
  • Heavy duty battery structure provides vibration isolation during transport.
  • Advanced lithium-ion batteries provide good energy density, high discharge/recharge efficiency, and high cycle life.
  • Heavy duty battery structure provides vibration isolation during transport.

Applications

  • Grid firming/grid stabilization
  • Generator set transient assist
  • Black Start Capability/ Rig Up Power
  • Reserve Power Capacity
  • Grid firming/grid stabilization
  • Generator set transient assist
  • Black Start Capability/ Rig Up Power
  • Reserve Power Capacity

Standard Equipment

  • Power Grid Stabilization
    • Cat BDP1000 bi-directional power inverters
    • Energy storage batteries
    • Color HMI Touchscreen
    • Fire suppression system
    • HVAC system to maintain optimal interior temperatures
    • Remote communications via Modbus TCP

Optional Equipment