G3412C Low Emissions Gas Compression Engine

Photos

Tough and durable, built on the industry-standard G3400 platform bring maximum uptime and low operating cost to your operation. G3412C Low Emissions (LE) engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime.Ideal applications for G3412C (LE) engines include gas lift, gas gathering, and wellhead gas compression. Cat G3412C (LE) gas engine. Ratings: 475 bkW (637 bhp) @ 1800 rpm are NSPS site compliant capable with customer-provided aftertreatment.

Minimum Rating
637.0 bhp
Maximum Rating
637.0 bhp
Emissions
NSPS Site Compliant Capable
Displacement
1649.0 in3

Specs

Engine Specifications

Minimum Rating
637.0bhp
Maximum Rating
637.0bhp
Emissions
NSPS Site Compliant Capable
Displacement
1649.0in3
Compression Ratio
8.5:1
Aspiration
Turbocharged-Aftercooled
Rotation (from flywheel end)
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
136
Oil Change Interval
750 hours
Stroke
6.0in
Bore
5.4in
Weight - Dry
4720lb
Ignition, Protection
Cat EIS
Minimum Rating
637BHP
Maximum Rating
637BHP
Emissions
NSPS Site Compliant Capable
Displacement
1649in³
Compression Ratio
8.5:1
Aspiration
Turbocharged-Aftercooled
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
136
Oil Change Interval
750 hours
Stroke
6in
Bore
5.4in

Capacity for Liquids

Cooling System
14.5gal
Lube Oil System (refill)
45.0gal
Cooling System
14.5gal (US)
Lube Oil System - Refill
45gal (US)

Features

Engine Design

- Proven reliability and durability- Ability to burn a wide spectrum of gaseous fuels- Robust diesel strength design prolongs life and lowersowning and operating costs- Broad operating speed range

- Proven reliability and durability- Ability to burn a wide spectrum of gaseous fuels- Robust diesel strength design prolongs life and lowersowning and operating costs- Broad operating speed range

Emissions

- Meets U.S. EPA Spark Ignited Stationary NSPSEmissions for 2007/8- 2.0 g/bhp-hr NOx emission versions available- Larger turbocharger and aftercooler provide leanair/fuel mixture, low emissions, and excellent fuelconsumption

- Meets U.S. EPA Spark Ignited Stationary NSPSEmissions for 2007/8- 2.0 g/bhp-hr NOx emission versions available- Larger turbocharger and aftercooler provide leanair/fuel mixture, low emissions, and excellent fuelconsumption

Lean Burn Engine Technology

Lean-burn engines operate with large amounts of excessair. The excess air absorbs heat during combustionreducing the combustion temperature and pressure,greatly reducing levels of NOx. Lean-burn design alsoprovides longer component life and excellent fuelconsumption.

Lean-burn engines operate with large amounts of excessair. The excess air absorbs heat during combustionreducing the combustion temperature and pressure,greatly reducing levels of NOx. Lean-burn design alsoprovides longer component life and excellent fuelconsumption.

Caterpillar Electronic Ignition System (EIS)

Detonation sensitive timing protects the engine againstdetonation damage. Higher voltage and longer sparkduration mean easier starts, fewer misfires, andsmoother operation. Diagnostic codes help pinpointcylinder and component of interest. Spark plugmaintenance codes identify spark plug condition

Detonation sensitive timing protects the engine againstdetonation damage. Higher voltage and longer sparkduration mean easier starts, fewer misfires, andsmoother operation. Diagnostic codes help pinpointcylinder and component of interest. Spark plugmaintenance codes identify spark plug condition

Ease of Operation

-    Deep sump oil pan has a larger capacity for normal750-hour oil change intervals- High-strength pan and rails for excellent mounting andstability- Side covers on block allow for inspection of internalcomponents

-    Deep sump oil pan has a larger capacity for normal750-hour oil change intervals- High-strength pan and rails for excellent mounting andstability- Side covers on block allow for inspection of internalcomponents

Full Range of Attachments

Large variety of factory-installed engine attachmentsreduces packaging time

Testing

Every engine is full-load tested to ensure proper engineperformance.

Gas Engine Rating Pro

GERP is a PC-based program designed to provide siteperformance capabilities for Cat®natural gas enginesfor the gas compression industry. GERP providesengine data for your site's altitude, ambient temperature,fuel, engine coolant heat rejection, performance data,installation drawings, spec sheets, and pump curves.

GERP is a PC-based program designed to provide siteperformance capabilities for Cat®natural gas enginesfor the gas compression industry. GERP providesengine data for your site's altitude, ambient temperature,fuel, engine coolant heat rejection, performance data,installation drawings, spec sheets, and pump curves.

Product Support Offered Through Global Cat Dealer

More than 2,200 dealer outletsCat factory-trained dealer technicians service everyaspect of your petroleum engineCat parts and labor warrantyPreventive maintenance agreements available for repairbefore-failure optionsS•O•SSM program matches your oil and coolant samplesagainst Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval

More than 2,200 dealer outletsCat factory-trained dealer technicians service everyaspect of your petroleum engineCat parts and labor warrantyPreventive maintenance agreements available for repairbefore-failure optionsS•O•SSM program matches your oil and coolant samplesagainst Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience

Over 60 years of natural gas engine productionOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheelhousings- Machine critical components- Assemble complete engine

Over 60 years of natural gas engine productionOwnership of these manufacturing processes enablesCaterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheelhousings- Machine critical components- Assemble complete engine

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com

Standard Equipment

  • Air Inlet System
    • Air cleaner — single element with service indicator
  • Control System
    • Electronic governor
    • Air/fuel ratio control on 1.0 g/bhp-hr NOx engines
  • Cooling System
    • Thermostats and housing
    • Jacket water pump
    • Aftercooler water pump
    • Aftercooler core
  • Exhaust System
    • Watercooled exhaust manifolds
    • Dry exhaust elbow
  • Flywheels & Flywheel Housings
    • SAE No. 0 flywheel
    • SAE No. 1 flywheel housing
    • SAE standard rotation
  • Fuel System
    • Gas pressure regulator (1.5 to 5 psi gas supply required)
    • Natural gas carburetor
  • Ignition System
    • Cat Electronic Ignition System (EIS) with detonationsensitive timing
  • Instrumentation
    • Service meter
  • Lube System
    • Crankcase breather — top mounted
    • Oil cooler
    • Oil filter — RH
    • Oil pan — deep sump
    • Oil filler — RH in valve cover and RH dipstick
  • Mounting System
    • Engine supports
  • Protection System
    • Detonation sensitive timing control
    • Shutoff
  • General
    • Paint — Cat yellow
    • Crankshaft vibration damper and pulleys
    • Lifting eyes

Optional Equipment

  • Air Inlet System
    • Air cleaner — two-stage
    • Air inlet adapter
    • Precleaner
    • Air cleaner rain cap
  • Charging System
    • Battery chargers
    • Charging alternators
    • Ammeter gauge
    • Ammeter gauge and wiring
    • Control mounting
  • Cooling System
    • Radiators
    • Blower fan and fan drives for customer suppliedradiators
    • Expansion tank
    • Heat exchangers
  • Exhaust System
    • Flexible fittings
    • Elbows
    • Flanges
    • Rain caps
    • Mufflers
  • Fuel System
    • Dual gas regulator
    • Carburetor kits
    • Fuel filter
  • Ignition System
    • CSA ignition
    • Ignition ground wiring harness
    • Power supply
  • Instrumentation
    • Alarm module
    • Gauges and instrument panels
  • Mounting System
    • Vibration isolators
  • Power Take-offs
    • Auxiliary drive pulleys
    • Enclosed clutch and clutch support
    • Front stub shaft
    • Flywheel stub shaft
    • Pulley removal
  • Protection System
    • Gas valves
    • Status control box interconnect wiring harness
  • Starting System
    • Air starting motor — electric air start control
    • Air pressure regulator
    • Air silencer
    • Electric starting motors — single 24-volt
    • Starting aids
    • Battery sets
  • General
    • Special paint