Photos
|
|
|
|
|
Specs
Ratings
- Power Range
- 298 bkW - 373 bkW (400 bhp - 500 bhp)
- Power Range
- 400 bhp - 500 bhp (298 bkW - 373 bkW)
Engine Specifications
- Speed Range
- 2900 rpm
- Emissions
- EPA Tier 3 Recreational, IMO II, RCD 2016
- Aspiration
- Turbocharged, aftercooled
- Bore
- 4.13in
- Stroke
- 5.31in
- Displacement
- 427.16in3
- Rotation (from flywheel end)
- Counterclockwise
- Configuration
- In-line 6, 4-Stroke-Cycle Diesel
- Aspiration
- Turbocharged, aftercooled
- Bore
- 4.13in
- Configuration
- In-line 6, 4-Stroke-Cycle Diesel
- Displacement
- 428in³
- Emissions
- IMO II, U.S. EPA Tier 3, RCD II, China II
- Rotation from Flywheel End
- Counterclockwise
- Speed Range
- 2900 rpm
- Stroke
- 5.31in
Dimensions & Weights
- Length of Engine
- 54.9in
- Height
- 34.5in
- Width of Engine
- 31.4in
- Engine Dry Weight - Approximate
- 1676lb
- Height
- 34.5in
- Length - Engine
- 43.1in
- Width - Engine
- 31.4in
Features
Key Features & Benefits
- Common rail fuel system enables optimum combustion and low emissions
- Reduced combustion noise through advanced electronic control
- 12V or 24V electrical system
- Compatible with Cat® displays and electronics
- Closed crankcase ventilation system improves engine room cleanliness
- Gear-driven jacket water pump and sea water pump for superior reliability
- Maintenance free valve train with hydraulic valve lash adjusters
- Self-priming fuel system ensures a smooth start every time
- Common rail fuel system enables optimum combustion and low emissions
- Reduced combustion noise through advanced electronic control
- 12V or 24V electrical system
- Compatible with Cat® displays and electronics
- Closed crankcase ventilation system improves engine room cleanliness
- Gear-driven jacket water pump and sea water pump for superior reliability
- Maintenance free valve train with hydraulic valve lash adjusters
- Self-priming fuel system ensures a smooth start every time
Standard Equipment
-
- Standard Equipment
-
- Water cooled turbocharger and exhaust manifold
- Common rail fuel system
- Corrosion resistant sea water aftercooler
- Closed crankcase ventilation system
- Starter motors - 12V or 24V
- Fuel cooler
- Integral engine oil cooler
- Vibration damper and guard
- Electric fuel priming pump
- Self-tensioning multi-vee alternator drive belt
- Gear driven sea water pump (rubber impeller)
- Fin and tube type jacket water heat exchanger
- Front and rear engine mounting brackets
Optional Equipment
-
- Optional Attachements
-
- Alternators - 24V 140 amp - 12V 175 amp
- Transmission gear oil cooler (engine mounted)
- Instrument Panels
- Glow plugs
- Jacket water heater
- 6" water cooled exhaust elbow
- Isolation mounts
- Primary fuel filter/water separator (remote mount)
- Selection of factory-fitted marine transmissions and oil hoses
- Cabin heater (calorifier) connections
- Triple groove PTO pulley (crankshaft mounted)
- Flexible fuel hoses
- Right-hand and high level left hand oil dipsticks