Exterior View
Maximum Rating

3300 BHP

Emissions

EPA Non-Road Tier 2, IMO II and China Stage III

Displacement

3173 in³

3516C (HD) Well Stimulation Engine

ABOUT THE 3516C HD

Well stimulation operations in the oilfield are complex and demanding. The 3516C (HD) engine for well stimulation operations was specifically developed to reach the highest power nodes while meeting the highest standards in durability, reliability, and emissions. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3516C (HD) engines, with ratings: 2237-2461 bkW (3000-3300 bhp) @ 1900 rpm meet China Stage III and U.S. Non-road EPA Tier 2 equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

The 3516C HD model is not yet in your cart.
Click on the add to cart button to build an equipment list.
Add the 3516C HD Model to the Cart

TAKE THE 3516C HD FOR A SPIN

GET A PEEK INSIDE THE 3516C HD’S CABIN
GET A PEEK AT THE EXTERIOR OF THE 3516C HD

COMPARE THE 3516C HD TO OTHER Oil-and-gas

Maximum Rating
3300BHP
Displacement
3173in³
Minimum Rating
3000BHP
Aspiration
Turbocharged-Aftercooled
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
151
Stroke
8.46in
Bore
6.69in
Emissions
EPA Non-Road Tier 2, IMO II and China Stage III
Length
135.83in
Width
66.5in
Height
73.3in
Weight
10590lb
  • Air Inlet System
    • Separate circuit aftercooler core — corrosion resistant coated (air side), air cleaner (single element w/service indicator)
    • Dual rear-mounted turbochargers
  • Control System
    • ADEM A3 ECU — LH
    • Electronic fuel injector fuel system (10 amp DC power required to drive electronic engine control unit)
  • Cooling System
    • Torque converter connections
    • Thermostats and housing, jacket water pump, gear-driven centrifugal
    • Connections for radiator cooling
    • Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections
    • Separate Circuit Aftercooler (SCAC)
  • Exhaust System
    • Exhaust manifold — dry, stainless steel bellows
    • Dual turbochargers with watercooled bearings
    • Exhaust outlet: 292 mm I.D. (11.5 in), 12-10.5 mm dia. holes EQ SP, 376 mm bolt hole dia.
  • Flywheels And Flywheel Housing
    • Flywheel, SAE No. 0 — 151 teeth
    • Flywheel housing — SAE No. 0
  • Fuel System
    • Primary fuel filter
    • Fuel priming pump
    • Fuel filter — RH spin-on type
    • Fuel transfer pump
    • Electronically controlled unit injectors
  • Instrumentation
    • No standard instrumentation
    • Optional, remote instrumentation available
    • Service meter
  • Lube System
    • Crankcase breather — top-mounted
    • Oil cooler
    • Oil filler and dipstick — RH
    • Oil pump
    • Oil filter — RH spin-on type
    • Rear sump oil pan, 250-hour change interval
    • Oil pan drain valve — 3/4″ NPT female connection
  • Mounting System
    • Trunion front support
  • Power Take-offs
    • Front housing — two-sided
  • Protection System
    • ADEM A3 ECU system to provide customer-programmable engine deration strategies to protect against adverse operating conditions
    • Emergency stop logic inputs provided at 40-pin customer interface connection
    • Air inlet shutoff
  • General
    • Paint — Cat yellow
    • Vibration damper and guard
    • Lifting eyes
    • B-Series LAND
  • Air Inlet System
    • Air cleaner and air cleaner mounting
    • Remote air inlet adapters
    • Air inlet heater
  • Charging System
    • Battery chargers
    • Charging alternators
  • Control System
    • Local speed throttle control
    • Throttle position sensors
    • Load sharing modules
    • Governor conversion
  • Cooling System
    • High gloss black folded core radiators
    • Coolant regulator conversion
    • Belt guard and radiator guard
    • Blower fan
    • Radiator cover
    • Fan drive and fan pulleys
    • Water level switch gauge
    • Coolant level sensors
    • Coolant conditioner
    • Expansion tank
    • Heat exchanger cooling conversion
    • Auxiliary water pump
    • Air separator
  • Emissions Certifications
    • IMO Certification and European Union Certification
  • Exhaust System
    • Flexible exhaust fitting
    • Elbows and flange
    • Flange and exhaust adapters
    • Manifold and mufflers
  • Fuel Systems
    • Flexible fuel lines
    • Fuel cooler
    • Water/fuel separator
    • Fuel level switch
  • Instrumentation
    • Customer management device
    • Remote panel display and remote cylinder temperature display
    • Switches and contactors
    • Gauges and instrument panels
  • Lube System
    • Fumes disposal
    • Oil pans
    • Prelube options
    • Sump pumps
    • Oil Filters
  • Mounting System
    • Base remova
    • Vibration isolators
    • Rails
  • Power Take-offs
    • Front housing
    • Flexible couplings
    • Coupling hub
    • Front accessory drives
    • Auxiliary drive shaft
    • Auxiliary drive pulleys
    • Front stub shaft
    • Damper guard removal
    • Pulleys
    • Flywheel stub shaft
  • Marine Society Requirements
    • Marine society conversion
    • Spray shielding
  • Protection System
    • Shutoffs
    • Switches and contractors
    • Explosion relief valve
    • Sensors
    • Oil pressure monitor
    • Shutoff controls
    • Corrosion protection
  • Starting System
    • Air starting motors — electric
    • Air pressure regulator
    • Air silencer
    • Hydraulic starter
    • Air start controls — manual, electric
    • Redundant start
    • Starting aids
    • Battery sets – 24V
    • Battery cable and battery rack




STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here