Engine – Tier 4 Final/EU Stage V
- Bore
-
4.1in
- Gross Power (SAE J1995:2014)
-
284HP
- Displacement
-
427.8in³
- Net Power (SAE J1349:2011)
-
249HP
- Stroke
-
5.3in
- Emissions
-
Meets U.S. EPA Tier 4 Final/EU Stage V emission standards
- Peak Torque – 1,400 rpm
-
902lb-ft @ 1400 rpm
- Rated Speed
-
2200r/min
- Engine Model
-
Cat® C7.1: configured for two emissions options
- Torque Rise
-
52%
Engine – Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
- Torque Rise
-
26%
- Displacement
-
5.3in
- Net Power (SAE J1349:2011)
-
249HP
- Rated Speed
-
2200r/min
- Stroke
-
5.3in
- Peak Torque – 1,400 rpm
-
749lb-ft @ 1400 rpm
- Bore
-
4.1in³
- Gross Power (SAE J1995:2014)
-
286HP
- Emissions
-
Brazil MAR-1 and China Nonroad Stage III, equivalent to U.S. EPA Tier 3/EU Stage IIIA
- Engine Model
-
Cat® C7.1: configured for two emissions options
Wheels
- Drum Width
-
39in
- Drum Diameter
-
40.5in
- Outside Diameter
-
55.6in
- Tips per Wheel
-
60
- Weight
-
9720lb
- Width - Over Drums
-
127.7in
Axles
- Front
-
Planetary – Fixed
- Rear
-
Planetary – Oscillating
- Oscillation Angle
-
±10
Blades
- Maximum Depth of Cut
-
0.73ft
- Maximum Lift Above Ground
-
2.63ft
- Total Tilt Adjustment
-
2.14ft
- Width - Over End Bits
-
12.34ft
- Blade Tilt Angle - Left - Hydraulic
-
5,5°
- Height - Including Cutting Edge
-
2.82ft
- Width - Moldboard Length
-
11.98ft
- Blade Tilt Adjustment - Right
-
1ft
- Blade Tilt Adjustment - Left
-
1.14ft
- Blade Tilt Angle - Right - Hydraulic
-
4,8°
Dimensions (Approximate)
- Centerline of Rear Axle to Bumper
-
6.53ft
- Height - Top of Exhaust Pipe
-
11.1ft
- Turning Radius - Inside of Push Arms
-
8.27ft
- Hitch to Centerline of Front Axle
-
5.5ft
- Height - Top of Beacon
-
12.9ft
- Ground Clearance - Bumper
-
2.18ft
- Ground Clearance
-
1.23ft
- Width - Over Wheels
-
10.64ft
- Height - Top of Hood
-
8.6ft
- Length - With Blade on Ground
-
23.48ft
- Height - Top of Cab Roof
-
12ft
- Wheel Base
-
11ft
- Ground Clearance to Bottom of Bumper
-
2.2ft
- Height to Top of Radiator Guard
-
7.9ft
- Ground Clearance to Transmission Guard
-
1.2ft
- Centerline of Rear Axle to Bumper
-
6.5ft
- Overall Machine Length with Straight Blade
-
23.5ft
- Width over Platform
-
10.3ft
- Ground Clearance to Hitch
-
1.2ft
Service Refill Capacities
- Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV Only)
-
4.2gal (US)
- Differential - Final Drives - Front
-
17.2gal (US)
- Fuel Tank
-
132.1gal (US)
- Cooling System - Tier 3/Stage IIIA Equivalent
-
19.3gal (US)
- Note
-
All non-road Tier 4 Final and Stage V diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm for EPA
- Engine Crankcase
-
5.3gal (US)
- Differential - Final Drives - Rear
-
17.2gal (US)
- Hydraulic Tank Only
-
19.8gal (US)
- Transmission
-
14.8gal (US)
- Cooling Systems - Tier 4 Final/EU Stage V
-
21.4gal (US)
Engine
- Low Idle Speed
-
800r/min
- Maximum Altitude - Without Derating
-
9842.5ft
- High Idle Speed
-
2270r/min
Transmission
- Travel Speeds - Forward - Third
-
11.3mile/h
- Travel Speeds - Forward - Second
-
7.7mile/h
- Travel Speeds - Reverse - Second
-
8.5mile/h
- Travel Speeds - Forward - First
-
3.9mile/h
- Transmission Type
-
Cat Planetary Power Shift
- Travel Speeds - Reverse - First
-
4.5mile/h
- Travel Speeds - Reverse - Third
-
11.4mile/h
Hydraulic System - Steering
- Steering Pressure Limited
-
4003psi
- Steering System - Pump
-
Piston – Variable Displacement
- Vehicle Articulation Angle
-
84 degrees
- Steering System - Circuit
-
Pilot, Load Sensing
- Maximum System Flow
-
147 L/min @ 2,111 rpm (38.8 gal/min @ 2,111 rpm)
Braking System
- Parking Brake
-
Drum and Shoe, Spring Applied, Hydraulic Released
- Service Brakes
-
Single Disc Wet (Enclosed) 2 WHL
Hydraulic System
- Tilt Cylinder, Double Acting - Bore and Stroke
-
101.6 mm × 167 mm (4 in × 6.6 in)
- Lift Cylinder, Double Acting - Bore and Stroke
-
101.6 mm × 627 mm (4 in × 24.7 in)
- Pump Flow at 2,111 rpm
-
23.5gal/min
- Maximum Supply Pressure
-
2930psi
- Main Relief Pressure
-
3190psi
Sound Performance – Tier 4 Final/EU Stage V - Suppression
- Machine Sound Level (ISO 6395)
-
109dB(A)
- Note (3)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Machine Sound Level (ISO 6396)
-
70dB(A)
- Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (2)
-
The operator sound pressure level uncertainty is ± 2 dB(A)
- Note (4)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
Sound Performance – Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
- Note (1)
-
The operator sound pressure level uncertainty is ± 2 dB(A)
- Note (2)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Note (3)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
Sound Performance – Tier 4 Final/EU Stage V - Standard
- Machine Sound Level (ISO 6395)
-
111dB(A)
- Note (1)
-
The operator sound pressure level uncertainty is ± 2 dB(A)
- Note (3)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (2)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance – Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
- Note (3)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Machine Sound Level (ISO 6395)
-
110dB(A)
- Note (4)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (2)
-
The operator sound pressure level uncertainty is ± 2 dB(A)
- Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Operating Specifications – Tier 4 Final/EU Stage V
- Operating Weight
-
49652lb