D1 Mulcher

The D1 Mulcher features improved visibility, seat mounted controls, an intuitive operator interface, a pressurized cab, a hinged radiator grill, a tractor platform, a long life mulching head, a hydraulically operated front door and adjustable push bar, a closed loop hydrostatic circuit, a reversible drum, a drum speed bar indicator, a Cat C3.6 diesel engine, a Cat Sealed and Lubricated Track, a reversing fan, a turbine precleaner, and improved fuel economy.

Request a Quote View rental options Apply for credit

Engine Model

Cat C3.6

Power – Net

104hp

Displacement

220in³

Note (1)

Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

Net Power – 2,200 rpm – SAE J1349

104hp

Net Power – 2,200 rpm – ISO 9249/EEC 80/1269

104hp

Note (2)

All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Power Train

Hydrostatic

Control

Hydraulic

Speed

Variable

Winch Drive

Hydraulic

Weight

794lb

Drum Capacity – Optional Cable

195ft

Drum Capacity – Recommended Cable

277ft

Maximum Line Pull – Bare Drum

32150lb

Maximum Line Pull – Full Drum

20350lb

Maximum Line Speed – Bare Drum

50ft/min

Maximum Line Speed – Full Drum

79ft/min

Rope Diameter – Optional

0.75in

Rope Diameter – Recommended

0.67in

Overall width

27.91in

Winch Length

35.63in

Drum Diameter

8in

Throat Clearance

5.6in

Drum Width

9.65in

Operating Weight

23338lb

Operating Weight – LGP

24209lb

Note

Specifications shown are for machine equipped with mulcher, cab ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.

Drive Pumps

1

Relief Valve Settings

7033psi

Maximum Travel Speed – Forward

5.6mile/h

Track Motors

2

Maximum Travel Speed – Reverse

6.2mile/h

Pump Output

17.2gal/min

Relief Valve Settings

2988psi

FOPS

ISO 3449:2005 Level II

ROPS

ISO 3471:2008

Track Gauge – LGP

68in

Shoe Width – Standard

16in

Shoe Width – LGP

25in

Length – Track on Ground – LGP

89in

Track Gauge

59in

Ground Pressure

6.45psi

Number of Rollers – Each Side

6

Length of Track on Ground

89in

Ground Pressure – LGP

4.3psi

Number of Shoes – Each Side – Sealed and Lubricated Track (SALT) Undercarriage

43

Transmission – Hydraulic Tank

23.8gal (US)

Final Drives – Each Side

2.6gal (US)

Crankcase – With Filter

2.8gal (US)

Cooling System

4.2gal (US)

Final Drive – Each – LGP

2.6gal (US)

Fuel Tank

51.5gal (US)

Diesel Exhaust Fluid (DEF) Tank

4.9gal (US)

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Track Gauge – LGP

67.9in

Width – Tractor – Standard Shoes – No Mulcher – LGP

92.9in

Tractor Height – Standard

112in

Overall Length – With Blade – LGP

167.6in

Track Gauge – Standard

58.9in

Tractor Height – LGP

108.8in

Ground Clearance – Standard

13in

Ground Clearance – LGP

13in

Overall Length – With Blade – Standard

168in

Length – Basic Tractor – Without Mulcher – LGP

128.9in

Width – Tractor – Standard Shoes – No Mulcher – Standard

74.8in

Length – Basic Tractor – Without Mulcher – Standard

128.9in

Weight

3197lb

Overall Height

58in

Overall Width

84in

Optimum Hydraulic Pressure

5900psi

Drive Method

Polychain belt

Optimum Hydraulic Flow

30gal/min

Lift Height

31in

Maximum Tilt

14.5in

Working Width

72in

Length

53in

Drum Speed Range

2,150-2,450 rpm

Maximum Angle – Either Side

25°

Motor

Closed loop hydrostatic

Fixed Teeth per Drum

38

Power Train
- Cat C3.6 diesel engine
- Turbocharged aftercooled
- Aluminum bar plate cooling system (radiator, power train)
- Air cleaner with precleaner, automatic dust ejection and under-hood intake
- Automatic traction control
- Drive, auxiliary
- Dual path, closed-loop hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Reversing fan
Electrical
- Alternator, 150 Amp, heavy duty
- Alarm, backup
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Horn, electric
- Starter, electric, 12 volt heavy duty
Undercarriage
- SALT Undercarriage
- 6 roller track frame
- Track rollers, lifetime lubricated
- Carrier rollers
- Track adjusters, hydraulic
- Guards, front/rear guiding
Mulcher Hydraulics
- Hydraulics, 4 valve (for use with retrieval winch or ripper)
- Load sensing hydraulics
- Single lever, three function control
- Hydraulic pump and oil
- Closed-loop hydrostatic circuit
- Axial Piston variable displacement pump and motor
Guards
- Guard, track guiding, center
- Screen, rear, cab
- Screen, side, cab
- Sweeps, front
- Sweeps, rear
- Heavy duty crankcase guard
Operator Environment
- ROPS/FOPS cab
- Cab, polycarbonate windows and air conditioning
- Seat, air suspended, cloth
- Seatbelt, retractable 76 mm (3 in)
- Foot pads, dash
- Primary display, 254 mm (10″) touchscreen color monitor with back up camera
- Electronic Monitoring System with:
  – Gauges for engine coolant temperature, hydraulic oil temperature and fuel level
  – Travel speed limiter, electronic
  – Engine RPM and gear display
  – Hour meter, electric
  – Engine air cleaner service indicator, electronic
  – Water-in-fuel indicator, electronic
  – Mulcher drum speed and direction bar
- Slope Indicate
- Throttle switch, rotary
- Controls, seat mounted, fore/aft adjustment
- Armrests, adjustable
- Mirror, rearview, inside
- Single pedal combining deceleration and braking functions
- Independent forward/reverse speed settings
- Power port, 12 volt
- Coat hook
- Storage compartment
- Cup holder
- Floor mat, rubber, heavy duty
Other
- Cat Product Link^™ PL641 Cellular
- C-Frame, VPAT, hydraulic cylinders and lines
- Lockable engine enclosures
- Front pull device
- Ecology drains (engine, power train and implement oil and engine coolant)
- Scheduled oil sampling (SOSSM) ports (engine, power train implement oil)
- Vandalism protection
- Hinged radiator grill
- Rearview camera
- Extended life coolant, –37° C (–35° F)

Electrical
- Four integrated front halogen lights, two rear halogen
Blades
- VPAT XL blade
- VPAT LGP blade
- VPAT Intermediate blade
Operator Environment
- Radio, AM/FM, Bluetooth^®
Other
- Counterweight, rear
- Winch, retrieval
- Heater, engine, coolant, 120 volt
- Starting aid, ether
- Extended life coolant, –50° C (–58° F)

Coming Soon

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

Provide a safe & meaningful work environment
Deliver innovative solutions through our expertise
Committed to the long-term growth and success of our employees and customers
Grow our business profitably

D1 Mulcher

SHARE:

Coming Soon

Why Choose Louisiana Cat

YOU MIGHT ALSO BE INTERESTED IN