Exterior View
Interior View

826 Landfill Compactor

Cat Landfill Compactors are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to operate more efficiently and safely. Introduced in 1978, the 826 has been an industry leader for over 45 years. Focused on helping our customers succeed, we have continued to build upon each new series. The 826 continues our legacy of reliability, performance, safety, operator comfort, serviceability, and efficiency.

Gross Power – SAE J1995:2014
435hp
Net Power – SAE J1349:2011
405hp
Net Power – ISO 9249:2007
405hp
Engine Power – ISO 14396:2002
426hp
Engine Model
C15 Cat®
Emissions
U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
1800
Torque Rise
33%
Bore
5.4in
Stroke
6.7in
Displacement
927.6in³
High Idle Speed
2300r/min
Low Idle Speed
800r/min
Maximum Altitude – Without Derating (Tier 4 Final/Stage V)
9298ft
Maximum Altitude – Without Derating (Tier 3/Stage IIIA)
9098ft
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Weight (Tier 4 Final/Stage V)
90207lb
Operating Weight (Tier 3/Stage IIIA equivalent)
89186lb
Maximum Operating Weight (Tier 4 Final/Stage V)
92568lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
91549lb
Transmission Type
Planetary – Powershift – ECPC
Direct Drive – Forward 1
4.2mile/h
Direct Drive – Forward 2
7.5mile/h
Direct Drive – Reverse 1
4.3mile/h
Direct Drive – Reverse 2
8.6mile/h
Pump Flow at 1800 rpm
30.9gal/min
Main Relief Pressure
3771psi
Maximum Supply Pressure
3495psi
Lift System
Double Acting Cylinder
Bore
4.7in
Stroke
42.1in
Cooling System
30.6gal (US)
Engine Crankcase
9gal (US)
Transmission
17.4gal (US)
Fuel Tank
206.6gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
8.5gal (US)
Differential – Final Drives – Front
26.4gal (US)
Differential – Final Drives – Rear
29.1gal (US)
Hydraulic Tank Only
35.4gal (US)
Note
All nonroad Tier 4 Final and Stage V diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD and w
Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±5°
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Operator Sound Level (ISO 6396:2008) – Standard
73dB(A)
Machine Sound Level (ISO 6395:2008) – Standard
113dB(A)
Operator Sound Level (ISO 6396:2008) – Suppression
72dB(A)
Machine Sound Level (ISO 6395:2008) – Suppression
110dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (2)
The machine sound power level was measured according to the test ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (3)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Operator Sound Level (ISO 6396:2008) – Standard
73dB(A)
Machine Sound Level (ISO 6395:2008) – Standard
113dB(A)
Operator Sound Level (ISO 6396:2008) – Suppression
72dB(A)
Machine Sound Level (ISO 6395:2008) – Suppression
110dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (2)
The machine sound power level was measured according to the test ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (3)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Steering System – Circuit
Pilot operated, load sensing
Bore
4.5in
Stroke
22.7in
Steering System – Pump
Piston – Variable Displacement
Maximum System Flow
170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
Steering Pressure Limited
3481psi
Vehicle Articulation Angle
86°
Height to Top of Air Conditioning Condenser
14.99ft
Height – Cab Roof
13.75ft
Height – Top of Beacon
15.63ft
Height – Top of Exhaust Pipe
14.56ft
Height – Top of Hood
10.87ft
Ground Clearance – Bumper
3.15ft
Centerline of Rear Axle to Edge of Counterweight – No Rear Radiator Guard
9.38ft
Centerline of Rear Axle to Edge of Counterweight – Including Rear Radiator Guard
10.16ft
Hitch to Centerline of Front Axle
6.07ft
Wheel Base
12.14ft
Length – With Blade on Ground – Straight Blade – Including Rear Radiator Guard
28.59ft
Ground Clearance
2.11ft
Width – Over Wheels
12.47ft
Turning Radius – Inside of Wheels
9.18ft
Width – Moldboard Length
14.16ft
Width – Over End Bits
14.75ft
Height with Cutting Edge and Screen
6.23ft
Maximum Depth of Cut
1.5ft
Maximum Lift above Ground
4.19ft
Capacity, Rated
16.1yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
28.59ft
Width – Moldboard Length
14.66ft
Width – Over End Bits
14.83ft
Height with Cutting Edge and Screen
6.63ft
Maximum Depth of Cut
2.03ft
Maximum Lift above Ground
3.825ft
Capacity, Rated
20.9yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
29.54ft
Width – Moldboard Length
14.25ft
Width – Over End Bits
14.41ft
Height with Cutting Edge and Screen
6.62ft
Maximum Depth of Cut
2.03mm
Maximum Lift above Ground
3.79ft
Capacity, Rated
22.9yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
30.7ft
Combination Tips (Weight Group)
21125lb
Plus Tips – Weight (Group)
22002lb
Paddle Tips – Weight (Group)
20540lb
Diamond Tips Weight (Group)
23997lb
Outside Diameter
77.6in
Outside Diameter – Diamond
78.1in
Drum Diameter
63.4in
Drum Width
47.2in
Feet Per Row
6
Feet Per Wheel
30
Replaceable
Weld On
Width Over Drums
3800mm
Tip Height
179mm
Tip Height – Diamond
7.25in
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Power Train
    • Single Clutch Speed Shifting (SCSS)
    • Electronic Clutch Pressure Control (ECPC)
    • Air to air aftercooler
    • Brakes, full hydraulic, enclosed, wet multiple disc service brakes
    • Cat clean emission module (U.S. EPA Tier 4 Final/ EU Stage V only)
    • Muffler (under hood) (U.S. EPA Tier 3/EU Stage IIIA equivalent)
    • Electro-hydraulic parking brake
    • Engine, Cat C15 configured for two emissions options: Tier 4 Final/Stage V, or emitting equivalent to Tier 3/Stage IIIA
    • Fuel priming pump (electric)
    • Fuel to air cooler
    • Ground level engine shutoff
    • Heat shield, turbo and exhaust manifold
    • Hydraulically driven demand fan
    • Integrated braking system
    • Radiator, Aluminum Modular (AMR)
    • Separated cooling system
    • Starting aid (ether)
    • Throttle lock
    • Torque converter with Lock Up Clutch (LUC)
    • Eco Mode
    • Transmission, planetary, with 2F/2R speed range control
    • Under hood ventilation system
  • Electrical
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance-free (4 – 1,000 CCA)
    • Electrical system, 24V
    • Light, warning unswitched (LED strobe)
    • Lighting system, halogen (front and rear)
    • Lighting, access stairway
    • Lighting, underhood
    • Starter, electric (heavy duty)
    • Ground level lockable master disconnect switch
    • Auxiliary start receptacle
  • Operator Environment
    • Camera, rear vision
    • Air conditioner with roof mounted condenser
    • Cab, sound-suppressed pressurized
    • Internal four-post rollover protective structure (ROPS/FOPS)
    • Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)
    • 12V power port for mobile phone or laptop connection
    • Radio, CB ready
    • Coat and hard hat hooks
    • Finger tip shifting controls
    • Flip-up armrest
    • Heater and defroster
    • Implement hydraulic lockout
    • Glass (window) – rubber mounted glass
    • Light, (dome) cab
    • Lunch box and beverage holders
    • Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage V) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
    • Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
    • Mirror, internal (panoramic)
    • Mirrors, heated, rearview (externally mounted)
    • Premium plus seat containing forced air heating and cooling, 2-way thigh adjustment, power lumbar and back bolster adjustment, ride stiffness adjustment, dynamic end dampening, and leather finish
    • Seat belt with minder, retractable, 76 mm (3 in) wide
    • STIC control system with lockout
    • Sun visor, front
    • Tinted glass
    • Transmission gear (indicator)
    • Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles
    • Wet-arm wipers/washers (front and rear)
    • Intermittent wipers (front and rear)
    • Precleaner, cab powered
    • Horn group (trumpet)
  • Guards
    • Guards, axle (front and rear)
    • Guard, cab window
    • Guard, driveshaft
    • Guards, crankcase and power train, hydraulically powered
    • Guard, differential (front and rear)
  • Fluids
    • Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
  • Other Standard Equipment
    • Demand fan/swing out (hydraulic reversible)
    • Doors, service access (locking)
    • Ecology drains for engine, radiator, transmission, hydraulic tank
    • Emergency platform egress
    • Engine, crankcase, 500 hour interval with CJ-4 oil
    • Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown
    • Fire suppression ready
    • Fuel tank, 782 L (207 gal)
    • Hitch, drawbar with pin
    • Hoses, Cat XT
    • Hydraulic, engine, and transmission oil coolers
    • Total hydraulic filtration system
    • Oil sampling valves
    • Oil change system, high speed
    • Steering, load sensing
    • Stairway, left and right rear access
    • Vandalism protection caplocks
    • Venturi stack
    • Fold down exhaust stack for shipping
  • Technology Products
    • Product Link – Cellular, Satellite
  • Special Arrangements
    • Engine: – Sound suppression
    • Engine precleaners – single stage
  • Blades
    • Dozer arrangement (no blade)
  • Wheels And Cleaner Bars
    • Striker bars
    • Wheels and tips: wheel arrangements – 7″ combination tips
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Radio, AM/FM/Aux/USB/Bluetooth®
    • Cat Compact SBAS Mapping (available through SITECH only)
    • Cat Compact RTK Mapping (available through SITECH only)
  • Guards
    • Guard – rear fan and grill
  • Power Train
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
  • Special Arrangements
    • Engine precleaners – dual stage
  • Miscellaneous
    • CE/UKCA Certification (standard where regulations require it)
    • Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)
  • Wheels And Cleaner Bars
    • Striker bars with cleaner fingers
  • Other Standard Equipment
    • Stairway, swingout (LH & RH)

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN