Exterior View
Interior View

836 Landfill Compactor

Cat Landfill Compactors are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to operate more efficiently and safely. Introduced in 1993, the 836 has been an industry leader for over 30 years. Focused on helping our customers succeed, we have continued to build upon each new series. The 836 continues our legacy of reliability, performance, safety, operator comfort, serviceability, and efficiency.

Gross Power – SAE J1995:2014
562hp
Net Power – SAE J1349:2011
496hp
Net Power – ISO 9249:2007
502hp
Engine Power – ISO 14396:2002
553hp
Emissions
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 or Brazil MAR-1, equivalent to China Nonroad Stage III/U.S. EPA Tier 3/ EU Stage IIIA
Engine Model
C18
Rated Speed
1900 rpm
Peak Torque ( 1,400 rpm )
2275lbf·ft
Torque Rise
52%
Bore
5.71in
Stroke
7.2in
Displacement
1104.5in³
High Idle Speed
2120r/min
Low Idle Speed
750r/min
Maximum Altitude – Without Derating
7500ft
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Weight (Tier 4 Final/Stage V)
124063lb
Operating Weight (Tier 3/Stage IIIA equivalent)
123321lb
Maximum Operating Weight (Tier 4 Final/Stage V)
126364lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
125622lb
Transmission Type
Planetary – Powershift – ECPC
Direct Drive – Forward 1
4.3mile/h
Direct Drive – Forward 2
7.8mile/h
Direct Drive – Reverse 1
4.6mile/h
Direct Drive – Reverse 2
8.2mile/h
Lift System – Circuit
Flow Sharing Implement; Pilot Operated LS Valve w/EH
Lift System – Pump
Variable displacement piston
Max Flow @ 2000 rpm
79gal/min
Relief Valve Setting – Lift
4206psi
Cylinders, Double Acting: Lift, Bore, Stroke
137.9 mm x 1021 mm (5.5 in x 40.2 in)
Pilot System
Variable displacement piston
Pilot Relief Valve Setting
551psi
Steering System – Circuit
Flow Sharing Implement; Pilot, load sensing
Steering System – Pump
Piston – Variable Displacement
Max Flow @ 2000 rpm
79gal/min
Relief Valve Setting – Steering
3495lb/in²
Total Steering Angle
86
Steering Cycle Times – High Idle
3.9s
Steering Cycle Times – Low Idle
6.4s
Fuel Tank
209gal (US)
Diesel Exhaust Fluid Tank
9gal (US)
Cooling Systems – Tier 4 Final/EU Stage V
40gal (US)
Cooling System – Tier 3/Stage IIIA Equivalent
37.2gal (US)
Engine Crankcase
16gal (US)
Transmission
21.9gal (US)
Differential – Final Drives – Front
49gal (US)
Differential – Final Drives – Rear
50gal (US)
Hydraulic System – Implement/Steering
46.2gal (US)
Hydraulic Tank Only
27.2gal (US)
Note
– All nonroad Tier 4 Final/Stage V diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) for EPA and 10 ppm (mg/kg) for EU sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.4 kg of refrigerant which has a CO2 equivalent of 2.002 metric tonnes.
Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±6°
Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Spring Applied, Hydraulic Released
Operator Sound Level (ISO 6396:2008) – Standard
72dB(A)
Machine Sound Level (ISO 6395:2008) – Standard
111dB(A)
Operator Sound Level (ISO 6396:2008) – Suppression
72dB(A)
Machine Sound Level (ISO 6395:2008) – Suppression
109dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Operator Sound Level (ISO 6396:2008) – Standard
72dB(A)
Machine Sound Level (ISO 6395:2008) – Standard
112dB(A)
Operator Sound Level (ISO 6396:2008) – Suppression
72dB(A)
Machine Sound Level (ISO 6395:2008) – Suppression
110dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Height to Top of Beacon
15.2ft
Height to Top of Air Conditioning Condenser
15.2ft
Height – Cab Roof
14.1ft
Height – Top of Exhaust Pipe
15.1ft
Height – Top of Hood
11.3ft
Ground Clearance to Hitch
2.1ft
Ground Clearance to Transmission Guard
2.1ft
Ground Clearance to Bottom of Bumper
3.2ft
Centerline of Rear Axle to Rear Compactor Guard
11.3ft
Hitch to Centerline of Front Axle
7.5ft
Wheel Base
14.9ft
Width over Front Striker Bars
12.9ft
Width over Rear Striker Bars
12.9ft
Width over Platform
10.5ft
Width over Drums
14ft
Overall Machine Length with Semi U-Blade
35.8ft
Capacity
25.9yd³
Overall Width
17ft
Height
7.4ft
Height of Cutting Edge
3.7ft
Digging Depth
1.2ft
Ground Clearance
5.7ft
Turning Radius – Outside Corner of Blade
28.7ft
Turning Radius – Inside of Wheels
11.9ft
Weight
6894lb
Total Operating Weight
123000lb
Capacity
29.3yd³
Overall Width
17.4ft
Height
7.5ft
Height of Cutting Edge
4.1ft
Digging Depth
1.2ft
Ground Clearance
5.7ft
Turning Radius – Outside Corner of Blade
28.9ft
Turning Radius – Inside of Wheels
11.9ft
Weight
7963lb
Total Operating Weight
124063lb
Capacity
33.6yd³
Overall Width
17.4ft
Height
7.2ft
Height of Cutting Edge
4.1ft
Digging Depth
3.1ft
Ground Clearance
3.9ft
Turning Radius – Outside Corner of Blade
28.8ft
Turning Radius – Inside of Wheels
11.9ft
Weight
7696lb
Total Operating Weight
123785lb
Combination Tips (Weight Group)
28250lb
Plus Tips – Weight (Group)
29784lb
Paddle Tips – Weight (Group)
272227lb
Chopper Tips (Weight Group)
28404lb
Diamond Tips Weight (Group)
32659lb
Outside Diameter
83.8in
Outside Diameter – Diamond
84.3in
Drum Diameter
69.7in
Drum Width
55.1in
Feet Per Row
8
Feet Per Wheel
40
Replaceable
Weld on
Width Over Drums
4280mm
Tip Height
179mm
Tip Height – Diamond
7.25in
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Power Train
    • Advanced Productivity Electronic Control Shifting (APECS)
    • Air to air aftercooler
    • Brakes, fully hydraulic, enclosed, wet multiple disc brakes
    • Cat Clean Emission Module, insulated (Tier 4 Final/Stage V/Korea Stage V and Japan 2014)
    • Electro hydraulic parking brake
    • Engine, Cat C18: – Tier 4 Final/Stage V/Korea Stage V and Japan 2014 – Tier 3/Stage IIIA equivalent
    • Fuel priming pump, electric
    • Fuel to air cooler
    • Ground level engine shutoff
    • Guard (3 piece) transmission
    • Heat shield, turbo and exhaust manifold
    • Hydraulically driven demand fan
    • Integrated braking
    • Radiator, Aluminum Modular Radiator (AMR)
    • Separated cooling system
    • Starting aid (ether) automatic
    • Throttle lock
    • Torque converter with lockup clutch (LUC)
    • Turbine precleaner, engine air intake
    • Transmission, planetary, with 2F/2R speed range control
    • Underhood ventilation system
  • Electrical
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance-free (4-1,000 CCA)
    • Converter, 10-15 amp, 24V to 12V
    • Lighting system, halogen (front and rear)
    • Lighting, access stairway
    • Starter, electric (heavy duty)
    • Starter lockout (ground level)
    • Starting receptacle for emergency start
    • Transmission lockout (ground level)
  • Operator Environment
    • Air conditioner w/roof-mounted condenser
    • Cab, sound-suppressed and pressurized
    • Internal four-post rollover protective structure (ROPS/FOPS)
    • Radio ready for (entertainment) includes antenna, speakers and converter (12V, 10-15 amp) 12V power port for mobile phone or laptop connection
    • Camera, rear vision
    • Coat and hard hat hooks
    • Flip-up armrest
    • Heater and defroster
    • Horn, electric
    • Hydraulic controls (floor mounted)
    • Implement hydraulic lockout
    • Laminated glass
    • Light, (dome) cab
    • Lunchbox and beverage holders
    • Instrumentation, Gauges: – DEF fluid level (Tier 4 Final/Stage IV) – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
    • Instrumentation, Warning Indicators: – Action alert system, three category – Axle/brake oil temp, front – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp
    • Mirrors, rearview (externally mounted)
    • Parking brake status
    • Radio, CB (ready)
    • Seat, Cat Comfort, (cloth) air suspension
    • Seat belt, retractable, 76 mm (3″) wide
    • STIC Control System with steering lock
    • Sun visor, front
    • Glass (window) – rubber mounted glass
    • Transmission gear (indicator)
    • Vital Information Management System (VIMS) with graphical information display: external data port, customizable operator profiles
    • Wet-arm wipers/washers (front and rear)
    • Intermittent wipers (front and rear)
  • Wheels
    • Wheels, paddle, plus, combination, and diamond wheel configurations
  • Guards
    • Guards, axle (front and rear)
    • Guards, cab window
    • Guards, crankcase and power train, hydraulically powered
    • Guards, rear fan and grill
  • Blades
    • Bulldozer arrangement is included in the standard equipment. Bulldozer blades are optional.
  • Fluids
    • Antifreeze, premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
  • Other Standard Equipment
    • Auto Blade Positioner (ABP)
    • Demand fan/swing out (hydraulic reversible)
    • Doors, service access locking
    • Ecology drains for engine, radiator, hydraulic tank
    • Electronic clutch pressure control and remote mounted pressure taps
    • Emergency platform egress
    • Engine, crankcase, 500 hour interval with CJ-4 oil
    • Fuel tank, 793 L (210 gal)
    • Hitch, drawbar with pin
    • Hoses, Cat XT
    • Hydraulic oil cooler
    • Hydraulic, steering and brake filtration/screening system
    • Oil sampling valves
    • Product Link – Cellular
    • Stairways, fixed-L/R (rear access)
    • Steering, load sensing
    • Vandalism protection caplocks
    • Venturi stack
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Various Blades:
    • Straight blade
    • U-blade
    • Semi U-blade
  • Various Tip And Wheel Arrangements:
    • Paddle
    • Plus
    • Diamond

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN





STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here