Engine Model
Cat® C15
Engine Power – Tier 3 Engine – ISO 14396:2002
401hp
Engine Power – VR Engine – ISO 14396:2002
401hp
Bore
5.4in
Stroke
6.8in
Displacement
928in³
Note (1)
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
Note (2)
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
Note (3)
Engine derate will commence at an altitude of 2743 m (8,999 ft).
Note (4)
Note (5)
Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available.
Nominal Payload Capacity
66139lb
Gross Machine Mass
132300lb
Body Capacities
11.3-17.5 m³ (14.8-22.9 yd³)
Body 1
14.8yd³
Body 2 – Standard Body
18.8yd³
Body 3
22.9yd³
Wide Body
21.9yd³
Ejector Body (1)
19.9yd³
Ejector Body (2)
21.9yd³
Note
Heaped SAE 2:1.
Empty – Front Axle
67.50%
Empty – Rear Axle
32.50%
Loaded – Front Axle
44.20%
Loaded – Rear Axle
55.80%
Empty
63647lb
Empty – Front Axle
42944lb
Empty – Rear Axle
20704lb
Loaded
132277lb
Loaded – Front Axle
58451lb
Loaded – Rear Axle
73826lb
Raise
10.5s
Lower
11.2s
Total Cycle Time
21.7s
Outside Clearance Radius
337.4in
Inner Clearance Radius
198in
Articulation Angle
42.5°
Frame Oscillation
10 Degrees
Engine Crankcase – With Filter
9gal (US)
Transmission
18gal (US)
Hydraulic Tank
38gal (US)
Cooling System
20gal (US)
Front Differential and Final Drives
15gal (US)
Rear Differential and Final Drives
15gal (US)
Fuel Tank
108gal (US)
Forward – 1
3.9mile/h
Forward – 2
7mile/h
Forward – 3
12.9mile/h
Forward – 4
22.8mile/h
Reverse – 1
4.4mile/h
Note
Maximum travel speeds with standard 26.5 × R25 tires.
Tire Size
26.5 × R25
Differential Ratio
3.38:1
Final Drive Ratio
4.76:1
Total Reduction Ratio
16.13:1
Note
Fully floating axles.
Standards
ROPS/FOPS Certified Cab