Exterior View

3516 Diesel Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Standby Rating
2000 kVA
Prime Power Rating
1825 kVA
Emissions/Fuel Strategy
Low Fuel Consumption
Voltage
380 to 11000 Volts
Frequency
50 Hz
Speed
1500 rpm
Duty Cycle
Standby, Mission Critical, Prime, Continuous
Maximum Rating
2000 kVA
Minimum Rating
1600 kVA
Engine Model
3516 TA, V-16, 4-Stroke Water-Cooled Diesel
Bore
6.69in
Stroke
7.48in
Displacement
4210.64in³
Compression Ratio
13.0:1
Aspiration
TA
Fuel System
Mechanical unit injection
Governor Type
Woodward
Length – Maximum
232.9in
Width – Maximum
90in
Height – Maximum
93.2in
Dry Weight – Genset (maximum)
33900lb
  • Air Inlet System
    • Air cleaner; single element canister type
  • Air Inlet
    • Air cleaner
  • Cooling
    • Package mounted radiator
  • Exhaust
    • Exhaust flange outlet
  • Fuel
    • Secondary fuel filters
    • Fuel priming pump
    • Primary fuel filter with integral water separator
  • Generator
    • Matched to the performance and output characteristics of Cat engines
    • IP23 Protection
  • Power Termination
    • Busbar
  • Control Panel
    • EMCP 4 Genset controller
  • Control Panels
    • Over/under voltage (27/59)
    • Serial annunciator module data link
    • Communications:
    • Overcurrent (50/51)
    • Over/under frequency (81 o/u
    • Text alarm/event descriptions
    • Generator set packages include Caterpillar’s voltage regulator
    • Programmable protective relaying functions:
    • 4 Programmable relay outputs (Form A)
    • Reverse power (kW) (32)
    • Emergency stop
    • Amps (per phase & average)
    • Oil pressure (psi, kPa or bar)
    • Operating hours
    • 24 Volt DC operation
    • Low oil pressure
    • 6 Customer programmable digital inputs
    • 1 Programmable digital outputs
    • 1 Programmable relay outputs (Form C)
    • Volts (L-L & L-N)
    • Number of I/O varies on options selected
    • RPM – DC volts
    • Low coolant level
    • kVAr-hr (total)
    • Controls: Speed adjust – Auto/start/stop control – Engine cool-down timer – Engine cycle crank – Alarm acknowledge – Lamp test – Load histogram feature – PLC functionality – Customizable screens -0 True RMS AC metering, 3-phase, +/-2% accuracy
    • kW-hr (total)
    • Failure to start (overcrank)
    • Environmental sealed front face
    • Power factor (per phase & average)
    • Accessory module data link
    • Generator mounted – rear facing
    • High coolant temperature
    • Overspeed
    • 3 Analog inputs
    • Frequency (Hz)
    • Warning/shutdown with common LED indication of shutdowns for
    • Coolant temperature
    • IVR includes reactive droop capability, 3-phase voltage sensing, KVAR / PF modes, RFI suppression, min /max exciter. Limiter and exciter diode monitor
    • Customer data link (Modbus RTU)
    • kVA (per phase, average & percent)
    • Cat connect
    • Generator phase sequence
    • Reverse reactive power (kVAr) (32RV
    • DC volts
    • kW (per phase, average & percent)
    • kVAr (per phase, average & percent)
    • Emergency stop pushbutton
    • Digital indication for:
    • Low coolant temperature
    • EMCP 4.2B
  • Cooling System
    • Certified standard PGS provided
  • Exhaust System
    • Flanged faced outlet(s)
    • Dry exhaust manifold
  • Fuel System
    • Flexible fuel lines – shipped loose
    • Fuel priming pump
    • Fuel cooler; not included with packages without radiator
    • Secondary fuel filters
  • General
    • SAE standard rotation
    • Flywheel and flywheel housing – SAE No. 00
    • Right hand servicing
    • Caterpillar yellow with high gloss black rails and radiator
  • Generator And Attachments
    • Medium voltage:
    • Form wound
    • Winding temperature detectors
    • High voltage:
    • 3 Phase brushless, Salient pole
    • Permanent magnet excitation (PMG)
    • Permanent magnet excitation (PMG)
    • NEMA standard hole pattern
    • Internal excitation (IE)
    • Six lead
    • Class H insulation, Class F temperature rise at 40C ambient (105C prime/130C standby)
    • Low voltage:
    • Winding temperature detectors
    • NEMA standard hole pattern
    • Form wound
    • Winding temperature detectors
    • Random wound
    • Busbar connections, top center mounted, top cable entry
    • NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime/150C standby)
    • Anti-condensation space heater
    • NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime/150C standby)
  • Governing System
    • ADEM A3
  • Literature
    • Parts book
  • Lubrication System
    • Gear type lube oil pump
    • Fumes disposal
    • Oil drain lines and valve
    • Lubricating oil
    • Oil filter, filler and dipstick
    • Integral lube oil cool
  • Mounting System
    • Anti-vibration mounts (shipped loose)
    • Rubber anti-vibration mounts – shipped loose
    • Rails – Engine/generator/radiator mounting
  • Starting System
    • Battery disconnect switch
    • Battery and battery rack w/cables
    • 45 Amp Charging alternator
    • 24 Volt electric starting motor
  • Air Inlet System
    • Dual element air cleaner
    • Single element filter
  • Exhaust
    • Exhaust mufflers
  • Cooling System
    • Optional installed radiators
    • Coolant
    • Standard ambient ATAAC radiators
    • Optional installed ATAAC radiators
    • Standard ambient radiators
    • Water level switch gauges
  • Generator
    • Internal excitation (IE)
    • Anti-condensation heater
    • Oversize and premium generators
    • Permanent magnet excitation (PMG)
  • Crankcase System
    • No explosion relief valves
    • Ventilation system
    • Explosion relief valves
  • Power Termination
    • Circuit breakers, UL listed
    • Circuit breakers, IEC compliant
  • Control Panels
    • Remote monitoring software
    • Generator temperature monitoring & protection
    • Load share module
    • Digital I/O module
    • EMCP 4.2B
  • Exhaust System
    • Exhaust offset
    • Tier 4 dosing cabinet
    • Flexible fittings
    • Mufflers
    • Tier 4 clean emissions module
    • Elbows
    • Flange and exhaust expanders
    • Tier 4 clean emission MOD Kits
    • Flanges
    • Clean emission parts
    • Y Adapters
  • Mounting
    • Spring type vibration isolators
    • IBC isolators
    • Rubber anti-vibration mounts
  • Fuel System
    • Fuel priming pumps (Tier 4) – Manual or electric
    • Primary fuel filter
  • Starting/charging
    • Jacket water heater
    • Oversize batteries
    • Battery chargers
    • Air starting motor with control and silencer
    • Heavy duty starting system
    • Charging alternator
  • General
    • Special paint (Colors other than Caterpillar yellow or high performance paints)
    • US aid emblem
  • Generators And Attachments
    • Thermostat for space heater
    • Alternator air cleaner
    • Differential current transformers (DCT)
    • Differential current transformers (DCT) 8.7 kV and 15 kV classes
    • Generator conversion
    • Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, IE, No. of Leads = 6, Pitch = .6667: 1600 Frame
    • Low / Medium voltage: 380/400/415 volts, 3 phase 1500 rpm. RW, PM, No. of Leads = 6, Pitch = .6667: 1600 and 1800 Frames
    • Space heater
  • Instrumentation
    • Pyrometer and thermocouples
  • Lubrication System
    • Oil level regulator
    • Prelube pumps
    • Lube oil in standard sump
  • Mounting System
    • Spring type vibration isolators
    • Puck style low efficiency isolators
    • IBC vibration isolators
  • Power Connections
    • Neutral ground connections
    • Center post busbars
    • Right side power connections
    • Rear power connections
    • 2700 Frame, four lead, four terminal
    • Left side power connections
    • Ground cables between generator and terminal box
    • Low voltage Circuit breakers
  • Special Tests / Reports
    • IBC Certification
    • Standard engine test charge
    • PGS Test report @ 1.0 power factor
    • Generator test report
    • Fuel consumption test
    • Canadian Standards Association certification
    • PGS Test report @ 0.8 power factor
    • OSHPD Certification
    • Torsional vibration analysis reports
    • Generator set fuel consumption test
  • Starting And Charging
    • Electric starting motors
    • Air pressure regulator
    • 24 Volt battery set – Dry
    • Engine barring device
    • Starter cover
    • Air starting motors
    • Jacket water heaters
    • 10, 20, 35 and 50 Amp Battery chargers
  • Extended Service Coverage
    • Platinum, Gold and Silver coverage




STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE



Request for Quote

Clear All Items in Your Cart
Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

  • Select an equipment listed in step 2 to get started

Promotional Items Associated with the Selected Equipment

The Great Payback: Low Financing Bundle Details:

The Great Payback: Bundle 1 Fuel Credit Bundle Details:

Small Excavators Big Savings Details:

Compact Equipment Offer:

Compact Equipment Offer:

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:
  • Add a specific comment for each item in your cart
  • Fill out the required information in the submission form
Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here