910 Compact Wheel Loader

The Cat® 910 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Maximum Gross Power

110hp

Rated Net Power – Rated Engine Speed

2200r/min

Maximum Gross Power – Rated Engine Speed

1800r/min

Maximum Gross Power – ISO 14396 (metric)

112hp

Rated Net Power – SAE J1349

99hp

Rated Net Power – ISO 9249

98hp

Maximum Gross Torque – SAE J1995

335ft·lbf

Maximum Gross Torque – ISO 14396

332ft·lbf

Maximum Net Torque – SAE J1349

329ft·lbf

Maximum Net Torque – ISO 9249

327ft·lbf

Displacement

220in³

Bore

3.85in

Stroke

4.72in

Engine Model

Cat C3.6

Emissions

Engine meets Tier 4 Final/Stage V emission standards.

Note

Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Maximum Gross Power – ISO 14396

110hp

Operating Weight

18102lb

Bucket Capacities

1.3-3.5 m3 (1.7-4.6 yd3)

Bucket Capacities – General Purpose

1.3-1.9 m³ (1.7-2.5 yd³)

Bucket Capacities – Light Material

2.5-3.5 m³ (3.3-4.6 yd³)

Recyclability

95%

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005

Note (2)

The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).

Note (3)

The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (4)

*The measurements were conducted with the cab doors and windows closed.

Cooling System

5.7gal (US)

Fuel Tank

43.6gal (US)

Hydraulic System – Including Tank

25.9gal (US)

Hydraulic Tank

14.5gal (US)

Transmission

0.8gal (US)

Note

DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Axles – Front Center Differential

2gal (US)

Axles – Rear Center Differential

2gal (US)

Engine Crankcase

2.6gal (US)

Diesel Exhaust Fluid (DEF) Tank

4.8gal (US)

Note

*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Forward and Reverse – Speed Range 3

25mile/h

Forward and Reverse – Speed Range 2*

12.5mile/h

Forward and Reverse – Speed Range 1*

6.3mile/h

Note (2)

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Standard Size

15.5 R25 L2 XTLA

Other Choices Include

17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow

Note (3)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Front

Fixed; Locking differential (standard)

Rear

Oscillating ±11 degrees; Locking differential (Standard)

Maximum Working Pressure – Steering Pump

2683psi

Steering Articulation Angle – Each Direction

40°

Steering Cycle Times – Full Left to Full Right – At 2,350 rpm: 90 rpm Steering Wheel Speed

3.2s

Maximum Flow – Steering Pump

17gal/min

Number of Steering Wheel Turns – Full Left to Full Right or Full Right to Full Left

3.75turns

Hydraulic Cycle Time – Dump, at Maximum Reach

1.4s

Hydraulic Cycle Time – Total Cycle Time

12.5s

Maximum Working Pressure – Implement Pump

3408psi

Relief Pressure – Tilt Cylinder

4931psi

Hydraulic Cycle Time – Rackback

2.2s

Relief Pressure – Tilt Cylinder – 3rd Function Maximum Working Pressure

3046psi

Hydraulic Cycle Time – Raise, Ground Level to Maximum Lift

5.2s

Maximum Flow – Implement Pump

32gal/min

Relief Pressure – Tilt Cylinder – 4th Function Maximum Working Pressure

3046psi

Maximum Flow – Implement Pump – 4th Function, Maximum Flow

24gal/min

Maximum Flow – Implement Pump – 3rd Function, Maximum Flow

24gal/min

Hydraulic Cycle Time – Float Down, Maximum Lift to Ground Level

3.7s

910 Compact Wheel Loader

Why Choose Louisiana Cat

YOU MIGHT ALSO BE INTERESTED IN

910 Compact Wheel Loader

SHARE:

4203 mm (165 in) Material Handling Arms – Loader

3941 mm (155 in) Material Handling Arms – Loader

1550 mm (61 in) Pallet Fork Carriage

1550 mm (61 in) Pallet Fork Carriage

1524 mm (60 in) Pallet Fork Carriage

2134 mm (84 in) Log & Lumber Fork Carriage

1.9 m3 (2.5 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.9 m3 (2.5 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.7 m3 (2.2 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.7 m3 (2.2 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.6 m3 (2.1 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.6 m3 (2.1 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.6 m3 (2.1 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.6 m3 (2.1 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.5 m3 (2.0 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.5 m3 (2.0 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Teeth

1.5 m3 (2.0 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.4 m3 (1.8 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.4 m3 (1.8 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.4 m3 (1.8 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.3 m3 (1.7 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Teeth

1.3 m3 (1.7 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.3 m3 (1.7 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.2 m3 (1.6 yd3) ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.2 m3 (1.6 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.9 m3 (2.5 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Bolt-On Cutting Edge

1.7 m3 (2.2 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Bolt-On Cutting Edge

1.8 m3 (2.4 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Weld-On Teeth

1.6 m3 (2.1 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Weld-On Teeth

1.6 m3 (2.1 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Bolt-On Cutting Edge

1.5 m3 (2.0 yd3) ISO Coupler Flat Floor Bucket – Performance Series With Weld-On Teeth

1.34 m3 (1.75 yd3) IT Coupler Multi-Purpose Bucket With Bolt-On Cutting Edge

1.34 m3 (1.75 yd3) IT Coupler Multi-Purpose Bucket With Bolt-On Cutting Edge

BP25 Pickup Broom

BA25 Manual Angle Broom

Why Choose Louisiana Cat

YOU MIGHT ALSO BE INTERESTED IN