920 Compact Wheel Loader

Maximum Gross Power

121 hp

Operating Weight

21742 lb

Bucket Capacities

1.3-3.5 m3 (1.7-4.6 yd3)

ABOUT THE 920

The Cat® 920 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

The 920 model is not yet in your cart.

Click on the add to cart button to build an equipment list.

Add the 920 Model to the Cart

TAKE THE 920 FOR A SPIN

GET A PEEK INSIDE THE 920’S CABIN

GET A PEEK AT THE EXTERIOR OF THE 920

Maximum Gross Power

121hp

Rated Net Power – Rated Engine Speed

2200r/min

Maximum Gross Power – Rated Engine Speed

2200r/min

Maximum Gross Power – ISO 14396 (metric)

122hp

Rated Net Power – SAE J1349

120hp

Rated Net Power – ISO 9249

118hp

Maximum Gross Torque – SAE J1995

372ft·lbf

Maximum Gross Torque – ISO 14396

369ft·lbf

Maximum Net Torque – SAE J1349

366ft·lbf

Maximum Net Torque – ISO 9249

363ft·lbf

Displacement

220in³

Bore

3.85in

Stroke

4.72in

Engine Model

Cat C3.6

Emissions

Engine meets Tier 4 Final/Stage V emission standards.

Note

Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Maximum Gross Power – ISO 14396

121hp

Operating Weight

21742lb

Bucket Capacities

1.3-3.5 m3 (1.7-4.6 yd3)

Bucket Capacities – General Purpose

1.3-1.9 m³ (1.7-2.5 yd³)

Bucket Capacities – Light Material

2.5-3.5 m³ (3.3-4.6 yd³)

Recyclability

95%

Transmission

0.8gal (US)

Engine Crankcase

2.6gal (US)

Axles – Rear

4.5gal (US)

Cooling System

5.7gal (US)

Hydraulic System – Including Tank

25.9gal (US)

Fuel Tank

43.6gal (US)

Hydraulic Tank

14.5gal (US)

Note

DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

Diesel Exhaust Fluid (DEF) Tank

4.8gal (US)

Axles – Front

4.5gal (US)

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005

Note (3)

The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).

Note (2)

The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (4)

*The measurements were conducted with the cab doors and windows closed.

Maximum Working Pressure – Steering Pump

3190psi

Steering Cycle Times – Full Left to Full Right – At 2,350 rpm: 90 rpm Steering Wheel Speed

2.3s

Steering Articulation Angle – Each Direction

40°

Number of Steering Wheel Turns – Full Left to Full Right or Full Right to Full Left

3.4turns

Maximum Flow – Steering Pump

21.7gal/min

Relief Pressure – Tilt Cylinder

4641psi

Maximum Flow – Implement Pump – 3rd Function, Maximum Flow, Standard

25gal/min

Maximum Flow – Implement Pump

43.6gal/min

Relief Pressure – Tilt Cylinder – 4th Function Relief Pressure

4641psi

Hydraulic Cycle Time – Float Down, Maximum Lift to Ground Level

2.7s

Note

All cycle times listed are with cylinder snubbing turned off.

Maximum Working Pressure – Implement Pump

4061psi

Hydraulic Cycle Time – Total Cycle Time

11.5s

Hydraulic Cycle Time – Rackback

2.2s

Hydraulic Cycle Time – Dump, at Maximum Reach

1.8s

Hydraulic Cycle Time – Raise, Ground Level to Maximum Lift

4.8s

Maximum Flow – Implement Pump – 3rd Function, Maximum Flow, High

40gal/min

Maximum Flow – Implement Pump – 4rd Function, Maximum Flow

25gal/min

Note

*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Forward and Reverse – Speed Range 3

25mile/h

Forward and Reverse – Speed Range 2*

12.5mile/h

Forward and Reverse – Speed Range 1*

6.3mile/h

Rear

Oscillating ±11 degrees; Locking differential (standard)

Front

Fixed; Locking differential (standard)

Other Choices Include

17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid

Standard Size

17.5 R25 L2 XTLA

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Note (3)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (2)

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

STEP 2: MANAGE THE ITEMS IN YOUR EQUIPMENT LIST BEFORE SUBMITTING A REQUEST FOR QUOTE

Request for Quote

Clear All Items in Your Cart

Keep Shopping

Review items, Adjust Quantity, Remove Unwanted Equipment

Select an equipment listed in step 2 to get started

One More Step

In the next and final step, which consists of the submission of your equipment list for a request for quote you'll be able to:

Add a specific comment for each item in your cart
Fill out the required information in the submission form

Submit to get a Quote

Fill out the Form

If you're not finished yet with your equipment list, you can keep adding more items. Click here to go back to the previous page.

Keep Shopping

Terms and Conditions

Small Excavators Big Savings: Terms and Conditions

* Offer valid from October 1, 2024 through December 31, 2024 on new 313 through 317 Cat® excavators sold by participating Cat dealers to customers in the USA or Canada. Purchase must occur during offer period. Offer subject to machine availability and credit approval by Cat Financial. Not all customers will qualify. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

The Great Payback: Terms and Conditions

*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on select new Cat® machines listed in our Heavy Equipment Promotion page. Purchase must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The offered Cat Customer Value Agreement (CVA) includes 6 maintenance parts kits; S∙O∙SSM; and 36 month VisionLink® ConnectPro. The maintenance parts cover the first 3,000 hours^ (estimated 3 years) of machine utilization. Each kit contains one set of parts for regular planned maintenance under normal operating conditions. In some severe applications where maintenance parts need to be replaced more frequently, additional parts will be at customer’s expense. Offer excludes additional maintenance parts, dealer labor, wear parts, and fluids. Offer also includes a 36 month/5000 hour (whichever occurs first) Powertrain, Hydraulics and Technology Equipment Protection Plan (EPP). In some areas, EPP might be sold separately from the CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply. Contact your Cat dealer for details.

Compact Equipment Offer: Terms and Conditions

Financing provided by Caterpillar Financial.
*Offer valid from October 1, 2024 through December 31, 2024. Offer only available on purchases of new mini excavators, micro excavators, skid steer loaders, and compact track loaders sold by participating Cat dealers to customers in the USA or Canada. Purchases (both machine and CVA) and machine delivery must occur by December 31, 2024. Offer subject to machine availability. Offer is subject to credit approval by Caterpillar Financial Services Corporation for US customers, and Caterpillar Financial Services Limited for Canadian customers. Not all customers will qualify. The credit $500 USD for CVA purchase can only be applied toward the purchase of a qualifying Cat Customer Value Agreement (CVA). CVA must be at least 2yr/1000hr and must include 1-year Preventative Maintenance Parts Kit, TA1 annual Inspection, signed CVA contract, and Product LinkTM. Amount of CVA credit is the same for all models and cannot exceed the price of the qualifying CVA. Offer may change without prior notice and cannot be combined with any other offers. Additional terms and conditions may apply.

Privacy Policy

Users who submit a request for quote agree to receive communications from Louisiana Cat or its sales representatives.

Louisiana CAT follows CAM SPAN regulations and GDPR guidelines.

Users can manage their communications' opt-in and opt-out preferences online.

Users can request their information be removed from our database by sending an email at privacy@louisianacat.com or submitting a request online.

To view our privacy policy in full click here