Exterior View
Interior View

910 Compact Wheel Loader

The Cat® 910 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Maximum Gross Power
110hp
Rated Net Power – Rated Engine Speed
2200r/min
Maximum Gross Power – Rated Engine Speed
1800r/min
Maximum Gross Power – ISO 14396 (metric)
112hp
Rated Net Power – SAE J1349
99hp
Rated Net Power – ISO 9249
98hp
Maximum Gross Torque – SAE J1995
335ft·lbf
Maximum Gross Torque – ISO 14396
332ft·lbf
Maximum Net Torque – SAE J1349
329ft·lbf
Maximum Net Torque – ISO 9249
327ft·lbf
Displacement
220in³
Bore
3.85in
Stroke
4.72in
Engine Model
Cat C3.6
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power – ISO 14396
110hp
Operating Weight
18102lb
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities – General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities – Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
Recyclability
95%
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Cooling System
5.7gal (US)
Fuel Tank
43.6gal (US)
Hydraulic System – Including Tank
25.9gal (US)
Hydraulic Tank
14.5gal (US)
Transmission
0.8gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles – Front Center Differential
2gal (US)
Axles – Rear Center Differential
2gal (US)
Engine Crankcase
2.6gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.8gal (US)
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse – Speed Range 3
25mile/h
Forward and Reverse – Speed Range 2*
12.5mile/h
Forward and Reverse – Speed Range 1*
6.3mile/h
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Standard Size
15.5 R25 L2 XTLA
Other Choices Include
17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Locking differential (Standard)
Maximum Working Pressure – Steering Pump
2683psi
Steering Articulation Angle – Each Direction
40°
Steering Cycle Times – Full Left to Full Right – At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2s
Maximum Flow – Steering Pump
17gal/min
Number of Steering Wheel Turns – Full Left to Full Right or Full Right to Full Left
3.75turns
Hydraulic Cycle Time – Dump, at Maximum Reach
1.4s
Hydraulic Cycle Time – Total Cycle Time
12.5s
Maximum Working Pressure – Implement Pump
3408psi
Relief Pressure – Tilt Cylinder
4931psi
Hydraulic Cycle Time – Rackback
2.2s
Relief Pressure – Tilt Cylinder – 3rd Function Maximum Working Pressure
3046psi
Hydraulic Cycle Time – Raise, Ground Level to Maximum Lift
5.2s
Maximum Flow – Implement Pump
32gal/min
Relief Pressure – Tilt Cylinder – 4th Function Maximum Working Pressure
3046psi
Maximum Flow – Implement Pump – 4th Function, Maximum Flow
24gal/min
Maximum Flow – Implement Pump – 3rd Function, Maximum Flow
24gal/min
Hydraulic Cycle Time – Float Down, Maximum Lift to Ground Level
3.7s

Why Choose Louisiana Cat

We serve to build and power our community for a better future.

  • Provide a safe & meaningful work environment
  • Deliver innovative solutions through our expertise
  • Committed to the long-term growth and success of our employees and customers
  • Grow our business profitably

YOU MIGHT ALSO BE INTERESTED IN