M314 Wheeled Excavator

Engine Power - ISO 14396
134 HP
Engine Model
Cat C3.6
Bore
3.9 in
Displacement
221 in³

Specs

Engine

Engine Power - ISO 14396
134HP
Engine Model
Cat C3.6
Bore
3.9in
Displacement
221in³
Stroke
5in
Engine Emissions
Tier 4 Final, Stage V, and S Korea 2014 (Tier 4 Final) emission standards
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO
Note (3)
Engine power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, exhaust gas aftertreatment, and alternator.
Note (4)
Rating at 2,000 rpm.
Biodiesel Capability
Up to B20¹
Emissions
Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards.
Engine Power - ISO 14396 (DIN)
136hp (metric)
Net Power - ISO 9249
134HP
Net Power - ISO 9249 (DIN)
129hp (metric)

Hydraulic System

Main System - Maximum Flow - Implement
71gal/min
Maximum Pressure - Equipment
5076psi
Maximum Pressure - Swing
5149psi
Maximum Pressure - Travel
5076psi

Swing Mechanism

Maximum Swing Torque
28860ft·lbf
Swing Speed
9.1r/min

Machine Weight

Operating Weight Maximum
39683lb
Note (1)
Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires.
Operating Weight Minimum
33069lb

Service Refill Capacities

Cooling System
6.3gal (US)
Diesel Exhaust Fluid (DEF)
5.3gal (US)
Final Drive
0.6gal (US)
Fuel Tank
77.9gal (US)
Hydraulic System - Including Tank
58.1gal (US)
Hydraulic Tank
23.8gal (US)

Dimensions

Boom
5m (16' 6")
Bucket
0.76m3 (.78 yd3)
Stick
2.2m (7' 3")
Counterweight Clearance
4.1ft
Ground Clearance
1.1ft
Shipping Height - Top of Cab
3315ft
Shipping Length
26.9ft
Tail Swing Radius
7.1ft
Undercarriage Length
16.1ft
Wheel Base
8.2ft

Working Ranges and Forces

Boom Type
VA Boom
Bucket
0.76m3 (0.99 y3) GD
Stick
R2.2CB (7' 3")
Digging Height
17.4ft
Dump Height
23ft
Reach at Ground Level
28.4ft
Vertical Wall Digging Depth
13.9ft
Note (1)
Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a

Air Conditioning System

Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.

Drive

Maximum Travel Speed
23mile/h

Sustainability

Recyclability
91%

Features

LATEST FEATURES

        

  • Cab Monitor Improvements
        

  1. Continuously improved user interface allows for intuitive navigation, minimizing performance interruption with the easy-to-use touchscreen menu.
  2.     

  3. Identify apps quickly with a grid list view, abbreviated app names, and categorized menu options.
  4.     

  5. A new notification center keeps important information visible to the operator, and displays messages without shrinking the camera view. 
  6.     

  7. Color coded notifications set critical messages apart from the rest.
  8.     

  9. Use the in-monitor QR code to learn about machine and technology features through a full suite of “how-to” videos.
        

  • Enhance visibility to make service work easier and safer with optional inspection lighting.
  •     

  • Standard integrated vehicle health management system alerts the operator with service guidance and parts needed to enhance uptime.   

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area.
Build Number: 07D

        

  • Cab Monitor Improvements
        

  1. Continuously improved user interface allows for intuitive navigation, minimizing performance interruption with the easy-to-use touchscreen menu.
  2.     

  3. Identify apps quickly with a grid list view, abbreviated app names, and categorized menu options.
  4.     

  5. A new notification center keeps important information visible to the operator, and displays messages without shrinking the camera view. 
  6.     

  7. Color coded notifications set critical messages apart from the rest.
  8.     

  9. Use the in-monitor QR code to learn about machine and technology features through a full suite of “how-to” videos.
        

  • Enhance visibility to make service work easier and safer with optional inspection lighting.
  •     

  • Standard integrated vehicle health management system alerts the operator with service guidance and parts needed to enhance uptime.   

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area.
Build Number: 07D

HIGH PERFORMANCE WITH LOWER FUEL CONSUMPTION

        

  • Get the same productivity and results using up to 5 percent less fuel and work longer with a larger fuel tank over the M314F.
  •     

  • The Cat® engine matches your performance and production needs.
  •     

  • The engine meets U.S. EPA Tier 4 Final, EU Stage V, and S Korea 2014(Tier 4 Final) emission standards.
  •     

  • Travel between sites is easier with travel speeds up to 37 km/h(22 mph).
  •     

  • From dirt to asphalt, the excavator matches your needs to get the job done in a timely, efficient manner.
  •     

  • The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for precise working requirements.
  •     

  • With up to 15 percent more swing torque, you can get the job done faster to move on to the next one.
  •     

  • Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.
  •     

  • Don't let the temperature stop you from working. The excavator has a standard high-ambient temperature capability of 52° C (125° F)and cold start capability of 18° C (0° F).
        

  • Get the same productivity and results using up to 5 percent less fuel and work longer with a larger fuel tank over the M314F.
  •     

  • The Cat® engine matches your performance and production needs.
  •     

  • The engine meets U.S. EPA Tier 4 Final, EU Stage V, and S Korea 2014(Tier 4 Final) emission standards.
  •     

  • Travel between sites is easier with travel speeds up to 37 km/h(22 mph).
  •     

  • From dirt to asphalt, the excavator matches your needs to get the job done in a timely, efficient manner.
  •     

  • The advanced hydraulic system provides the optimum balance of power and efficiency while giving you the control you need for precise working requirements.
  •     

  • With up to 15 percent more swing torque, you can get the job done faster to move on to the next one.
  •     

  • Auxiliary hydraulic options give you the versatility to use a wide range of Cat attachments.
  •     

  • Don't let the temperature stop you from working. The excavator has a standard high-ambient temperature capability of 52° C (125° F)and cold start capability of 18° C (0° F).

LOWER MAINTENANCE COSTS

        

  • Quickly check and service your machine with daily maintenance points accessible from ground level.
  •     

  • Check the engine oil level quickly and safely from the ground.
  •     

  • Save up to 10 percent in maintenance parts with the new, longer lasting filters.
  •     

  • Track your machine's filter life and maintenance intervals on the in-cab monitor.
  •     

  • Two levels of fuel filtration protect the engine from dirty diesel.
  •     

  • The new hydraulic oil filter provides improved filtration performance and longer life with a 3,000-hour replacement interval - 50 percent longer than previous filter designs.
  •     

  • S-O-S SM ports are located at ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis.
        

  • Quickly check and service your machine with daily maintenance points accessible from ground level.
  •     

  • Check the engine oil level quickly and safely from the ground.
  •     

  • Save up to 10 percent in maintenance parts with the new, longer lasting filters.
  •     

  • Track your machine's filter life and maintenance intervals on the in-cab monitor.
  •     

  • Two levels of fuel filtration protect the engine from dirty diesel.
  •     

  • The new hydraulic oil filter provides improved filtration performance and longer life with a 3,000-hour replacement interval - 50 percent longer than previous filter designs.
  •     

  • S-O-S SM ports are located at ground level, simplifying maintenance and allowing for quick, easy extraction of fluid samples for analysis.

WORK IN COMFORT

        

  • Choose between Deluxe and Premium cab options.
  •     

  • The Deluxe seat is heated and air adjustable while the Premium seat is heated, cooled and adjusts automatically.
  •     

  • Get in and out of the cab easier using the tip-up left console.
  •     

  • Feel more comfortable in the cab while you work with reduced cab vibrations from advanced viscous mounts.
  •     

  • Control the excavator comfortably with easy-to-reach controls.
  •     

  • Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, bottle holder, and coat hook are also provided.
        

  • Choose between Deluxe and Premium cab options.
  •     

  • The Deluxe seat is heated and air adjustable while the Premium seat is heated, cooled and adjusts automatically.
  •     

  • Get in and out of the cab easier using the tip-up left console.
  •     

  • Feel more comfortable in the cab while you work with reduced cab vibrations from advanced viscous mounts.
  •     

  • Control the excavator comfortably with easy-to-reach controls.
  •     

  • Stow your gear with plenty of in-cab storage beneath and behind the seat, overhead, and in the consoles. A cup holder, bottle holder, and coat hook are also provided.

SIMPLE TO OPERATE

        

  • Start the engine with the push button, a Bluetooth® key fob, or the unique Operator ID function.
  •     

  • Program your power mode and joystick preferences using Operator ID; the excavator remembers your settings each time you go to work.
  •     

  • Navigate quickly on the standard high-resolution 254 mm (10 in) touchscreen monitor or with the aid of the jog dial control.
  •     

  • The Cat PL161 Attachment Locator is a Bluetooth device that makes finding your attachments and other gear quick and easy.
  •     

  • The excavator's onboard Bluetooth reader or Cat App on your phone will locate the device automatically.
  •     

  • Save time and energy with work tool recognition. A simple shake of the attached tool confirms its identity ensuring all attachment settings are correct, so you can get to work quickly and efficiently.
  •     

  • Not sure how a function works or how to maintain the excavator? Simply access the operator's manual on the touchscreen monitor.
  •     

  • The auto axle lock presses the pedal for you to reduce your overall number of actions. The machine automatically detects when the service brake and axle need to be lock or unlocked. It releases automatically when you press the travel pedal.
  •     

  • Tiltrotator attachments--ours or other brands--work seamlessly with Cat 2D Grade, Assist, Payload, and E-Fence . With no additional hardware required, all you have to do is simply select "Third Party Tiltrotator System Installation" in the monitor, do the calibration, and get to work.
  •     

  • Cat continues to improve user interface functionality for operators of all skill levels. The touchscreen monitor is an easy-to-use operating tool that presents the jobsite dashboard with an intuitive format. Productivity applications are displayed in  grid-view to read on-the-go, and touchscreen navigation is programmed to make sure job performance continues without any hold ups.
        

  • Start the engine with the push button, a Bluetooth® key fob, or the unique Operator ID function.
  •     

  • Program your power mode and joystick preferences using Operator ID; the excavator remembers your settings each time you go to work.
  •     

  • Navigate quickly on the standard high-resolution 254 mm (10 in) touchscreen monitor or with the aid of the jog dial control.
  •     

  • The Cat PL161 Attachment Locator is a Bluetooth device that makes finding your attachments and other gear quick and easy.
  •     

  • The excavator's onboard Bluetooth reader or Cat App on your phone will locate the device automatically.
  •     

  • Save time and energy with work tool recognition. A simple shake of the attached tool confirms its identity ensuring all attachment settings are correct, so you can get to work quickly and efficiently.
  •     

  • Not sure how a function works or how to maintain the excavator? Simply access the operator's manual on the touchscreen monitor.
  •     

  • The auto axle lock presses the pedal for you to reduce your overall number of actions. The machine automatically detects when the service brake and axle need to be lock or unlocked. It releases automatically when you press the travel pedal.
  •     

  • Tiltrotator attachments--ours or other brands--work seamlessly with Cat 2D Grade, Assist, Payload, and E-Fence . With no additional hardware required, all you have to do is simply select "Third Party Tiltrotator System Installation" in the monitor, do the calibration, and get to work.
  •     

  • Cat continues to improve user interface functionality for operators of all skill levels. The touchscreen monitor is an easy-to-use operating tool that presents the jobsite dashboard with an intuitive format. Productivity applications are displayed in  grid-view to read on-the-go, and touchscreen navigation is programmed to make sure job performance continues without any hold ups.

Safety

        

  • Access daily maintenance points from ground level.
  •     

  • Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the push button starting feature.
  •     

  • The standard ROPS cab meets ISO 12117-2:2008 requirements.
  •     

  • Enjoy better visibility into trenches, in each swing direction, and behind you with the help of smaller cab pillars, larger windows, and a flat engine hood design. Rearview and sideview cameras are standard.
  •     

  • The service platform design provides easy, safe, and quick access to upper service platform; the service platform steps use anti-skid punch plate to prevent slipping.
  •     

  • The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position.
  •     

  • Ground-level shut-off switch stops all fuel to the engine when activated and shuts down the machine.
        

  • Access daily maintenance points from ground level.
  •     

  • Keep your excavator secure with Operator ID. Use your PIN code on the monitor to enable the push button starting feature.
  •     

  • The standard ROPS cab meets ISO 12117-2:2008 requirements.
  •     

  • Enjoy better visibility into trenches, in each swing direction, and behind you with the help of smaller cab pillars, larger windows, and a flat engine hood design. Rearview and sideview cameras are standard.
  •     

  • The service platform design provides easy, safe, and quick access to upper service platform; the service platform steps use anti-skid punch plate to prevent slipping.
  •     

  • The standard hydraulic lockout lever isolates all hydraulic and travel functions in the lowered position.
  •     

  • Ground-level shut-off switch stops all fuel to the engine when activated and shuts down the machine.

Boost Efficiency and Productivity with Integrated Cat Technologies

        

  • Boost productivity versus traditional grading with optional Cat Grade with 2D system.
  •     

  • Optional Cat Payload helps you achieve precise load targets to improve your operating efficiency. Pick up a load of material--with a bucket and thumb combination or grapple and clamshell attachments--and get a real-time weight estimate without swinging.
  •     

  • Combine Payload with VisionLink® and remotely manage your production targets or take payload data with you. 
  •     

  • Upgrade to our dual antenna GNSS for maximum grading efficiency. The system lets you create and edit designs on the touchscreen monitor while you’re on the job, or you can have the plan design sent to the excavator to make your work easier. Plus, you get added benefits of avoidance zones, cut and fill mapping, lane guidance, and augmented reality along with advanced positioning capability.
  •     

  • Optional Grade Assist helps you stay on grade – simply and effortlessly – with single-lever digging. Set your desired bucket angle and let Bucket Assist automatically maintain the angle in sloping, leveling, fine grading, and trenching applications
  •     

  • Optional 2D E-fence is integrated right out of the factory to prevent the excavator from moving outside operator defined set points.
  •     

  • All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica. Already invested in a grade infrastructure? You can install grade systems from Trimble, Topcon, and Leica onto the machine.
        

  • Boost productivity versus traditional grading with optional Cat Grade with 2D system.
  •     

  • Optional Cat Payload helps you achieve precise load targets to improve your operating efficiency. Pick up a load of material--with a bucket and thumb combination or grapple and clamshell attachments--and get a real-time weight estimate without swinging.
  •     

  • Combine Payload with VisionLink® and remotely manage your production targets or take payload data with you. 
  •     

  • Upgrade to our dual antenna GNSS for maximum grading efficiency. The system lets you create and edit designs on the touchscreen monitor while you’re on the job, or you can have the plan design sent to the excavator to make your work easier. Plus, you get added benefits of avoidance zones, cut and fill mapping, lane guidance, and augmented reality along with advanced positioning capability.
  •     

  • Optional Grade Assist helps you stay on grade – simply and effortlessly – with single-lever digging. Set your desired bucket angle and let Bucket Assist automatically maintain the angle in sloping, leveling, fine grading, and trenching applications
  •     

  • Optional 2D E-fence is integrated right out of the factory to prevent the excavator from moving outside operator defined set points.
  •     

  • All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica. Already invested in a grade infrastructure? You can install grade systems from Trimble, Topcon, and Leica onto the machine.

Sustainability

        

  • The Cat® C3.6 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Korea Tier 5 emission standards.
  •     

  • The M314 emits up to 5% less CO2 than the M314F*.
  •     

  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels*** up to: 20% biodiesel FAME (fatty acid methyl ester)** or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details.
  •     

  • Cat Grade technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy.
  •     

  • Auto Engine Speed Control reduces unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
  •     

  • Cat® Payload for excavators provides on-the-go material weighing which helps reduce fuel burn by improving loading efficiency, job site productivity, and eliminating trips to the scale.
  •     

  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  •     

  • Cat Scheduled Oil Sampling (S•O•S℠) Services helps reveal excessive wear, contaminated fluids or other “unseen” issues that can shorten component life. In many cases, you can extend oil and coolant change intervals by using fluid monitoring. Consult your Cat dealer or the machine's operation and maintenance manual for more information.
  •     

  • Don't waste fuel idling. Cat VisionLink® online fleet monitoring helps you manage idle time and reduce fuel burn and greenhouse gas emissions. VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
  •     

  • Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite. Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.

*All comparisons to M314F. Productivity, fuel and CO2 emissions vary by application. CO2 emissions calculations based on a reference work cycle using 2.2 U.S. gallons per hour of #2 U.S. diesel fuel based. Applies IPCC2006 methodology using U.S. EPA Emissions Hub emission factors. Includes DEF (diesel exhaust fluid) related CO2. Fuel measurements are at 15°C. Estimated average fuel consumption improvements are based on tests or Product Link® data where available. Productivity improvements are based on test data. **Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of  blends higher than 20% biodiesel, consult your Cat dealer).***Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

        

  • The Cat® C3.6 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Korea Tier 5 emission standards.
  •     

  • The M314 emits up to 5% less CO2 than the M314F*.
  •     

  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels*** up to: 20% biodiesel FAME (fatty acid methyl ester)** or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or "Caterpillar Machine Fluids Recommendations" (SEBU6250) for details.
  •     

  • Cat Grade technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy.
  •     

  • Auto Engine Speed Control reduces unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
  •     

  • Cat® Payload for excavators provides on-the-go material weighing which helps reduce fuel burn by improving loading efficiency, job site productivity, and eliminating trips to the scale.
  •     

  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  •     

  • Cat Scheduled Oil Sampling (S•O•S℠) Services helps reveal excessive wear, contaminated fluids or other “unseen” issues that can shorten component life. In many cases, you can extend oil and coolant change intervals by using fluid monitoring. Consult your Cat dealer or the machine's operation and maintenance manual for more information.
  •     

  • Don't waste fuel idling. Cat VisionLink® online fleet monitoring helps you manage idle time and reduce fuel burn and greenhouse gas emissions. VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
  •     

  • Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite. Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.

*All comparisons to M314F. Productivity, fuel and CO2 emissions vary by application. CO2 emissions calculations based on a reference work cycle using 2.2 U.S. gallons per hour of #2 U.S. diesel fuel based. Applies IPCC2006 methodology using U.S. EPA Emissions Hub emission factors. Includes DEF (diesel exhaust fluid) related CO2. Fuel measurements are at 15°C. Estimated average fuel consumption improvements are based on tests or Product Link® data where available. Productivity improvements are based on test data. **Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of  blends higher than 20% biodiesel, consult your Cat dealer).***Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Standard Equipment

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Cab
    • ROPS, Sound Suppression
    • Keyless Push-to-Start engine control
    • Openable two-piece front window
    • Height-adjustable console, infinite with no tool
    • High-Resolution 254 mm (10 in) LCD touchscreen monitor
  • Electrical System
    • LED lights on boom and cab
    • Programmable time-delay LED working lights
    • Roading and indicator lights, front and rear
    • Maintenance free batteries
    • Centralized electrical disconnect switch
  • Engine
    • Cat C3.6 single turbo diesel engine
    • Power Mode Selector
    • One-touch low idle with auto engine speed control
    • Auto engine idle shutdown
    • 52° C (125° F) high-ambient cooling capacity
    • Cold start capability -18° C (0° F)
    • Double element air filter with integrated precleaner
  • Hydraulic System
    • Boom, stick, and bucket drift reduction valves
    • Auto hydraulic warm up
    • Heavy lift mode
  • Safety And Security
    • Rear and right-side-view cameras
    • Signal/warning horn
    • Lockable disconnect switch
    • Wide angle mirrors
    • Anti-skid plate and countersunk bolts on service platform
  • Service And Maintenance
    • Sampling ports for Scheduled Oil Sampling (S·O·S)
    • Ground-level and platform-level engine oil dipsticks
  • Technology
    • VisionLink
    • Remote Flash
    • Remote Troubleshoot
  • Undercarriage And Structures
    • All wheel drive
    • Automatic brake/axle lock
    • 3300 kg (7275 lb) counterweight

Optional Equipment

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Cab
    • Deluxe Cab
    • Premium Cab
  • Booms And Sticks
    • 4650 mm (15'3") One-Piece Boom
    • 4400 mm (14'5") One-Piece Boom
    • 5028 mm (16'6") Variable Adjustable boom
    • 2200 mm (7'3") stick
    • 2500 mm (8'2") stick
    • 2900 mm (9'6") drop nose stick without bucket linkage
  • Electrical System
    • LED lights on chassis (left-hand, right-hand) and counterweight
    • Electrical refueling pump
  • Hydraulic System
    • Boom and stick lowering check valves
    • One-slider joysticks
    • Two-slider joysticks
    • Joystick Steering
    • Cat TRS support
  • Safety And Security
    • 360° visibility
    • Travel alarm
    • Cat Asset tracker
    • Inspection lighting
    • 2D E-Fence
  • Service And Maintenance
    • Automatic lubrication system for implement and swing system
  • Technology
    • Cat Grade Connectivity
    • Cat Grade 2D
    • Cat Grade with Attachment Ready Option (ARO)
    • Cat Grade 3D dual GNSS
    • Laser catcher
    • Grade Assist
    • Cat Payload
    • Cat Tilt Rotator (TRS) Integration
  • Undercarriage And Structures
    • 9.00-20 16 PR, dual tires
    • 10.00-20 16 PR, dual tires
    • 10.00-20, dual, solid rubber tires
    • 300-80-22.5 dual pneumatic, spacerless tire